Black Box CP103A Operating Instructions

Ericsson 600 and 800 Cellular Phone Clip

Operating Instructions

When using these operating instructions, refer to the illustra-
tion on the back of this page.
The phone clip is suitable for use with original standard and
slim batteries only. The support button (number 1 in the illus-
tration; see the back of this page) is only used with the slim
battery. The support button is stored in the underside of the
phone clip button (number 2). To remove the support button,
use a pen to push down in the small hole in the middle of the
phone clip button (number 2).
When using the phone clip with a slim battery fitted to the
phone, snap the support button (number 1) into the underside
of the phone clip in the opening marked number 3. Snap the
phone clip onto the phone, engaging the hooks (number 4) on
the phone clip with the corresponding slots on the side of the
phone's chassis.
Use the belt clip with the phone clip for safety and comfort
in transportation. To attach the phone and phone clip to the belt
clip, slide the phone clip's button into the groove in the belt
clip. Slide it down until you hear it click into place. To remove
the phone and phone clip from the belt clip, press the button
on the bottom of the belt clip. The patented mechanism gently
releases the phone.
1000 PARK DRIVE • LAWRENCE, PA 15055-1018 • WWW.BLACKBOX.COM
TECH SUPPORT & ORDERING: 724-746-5500 • FAX: 800-321-0746
Product Code
CP103A
CP105A