Advertisement
Quick Links
HANGZHOU BEILIMU IMP.& EXP. CO., LTD
INSTRUCTION SHEET FOR HYDRAULIC HAND PUMPS
Repair Parts Sheets for hydraulic hand pumps are available from your nearest authorized BELIUM
Service Center or BELIUM Sales office.
NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE
YOU USE BELIUM HAND PUMPS.
Carefully inspect all components for shipping damage, if
shipping damage is found. Please notify carrier at once. The
carrier, not the BELIUM, is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions.
BELIUM cannot be responsible for injury or damage resulting from unsafe and incorrect
products use or system operation, or lack of maintenance.
DANGER is only use when your action or lack of action may cause serious injury or even death.
WARNING indicates a potential danger that requires correct action to avoid personal injury.
IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment user must be a qualified operator familiar with correct training and
use of hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment
damage or personal injury.
Please carefully inspect cylinders, couplers, hose and hand pump before use hydraulic
equipment, if you find any damage please contact with you nearest Authorized BELIUM
Service Center or Sales office. These damages can cause personal injury when you use the
hand pumps.
To avoid personal injury, please do not modify or weld hydraulic equipment without
approbated by BELIUM.
Please never lift a load more than the capacity of the cylinders, overloading causes equipment
failure and serious personal injury.
Cylinder is a load lifting device, not a load holding device. After the load has been raised or
lowered, it must always be held mechanically, please never work under a load supported by
hydraulic.
Please keep hands and feet away from cylinder and workplace during operation to avoid
www.beliumtools.com
Advertisement
Summary of Contents for Belium BP-280
- Page 1 HANGZHOU BEILIMU IMP.& EXP. CO., LTD INSTRUCTION SHEET FOR HYDRAULIC HAND PUMPS Repair Parts Sheets for hydraulic hand pumps are available from your nearest authorized BELIUM Service Center or BELIUM Sales office. NOTE PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE BELIUM HAND PUMPS.
- Page 2 For hydraulic technical helps or repair service. Please contact the authorized BELIUM Service Center in your area. BELIUM is not responsible for any injury and property damage. If you repair your equipment in other hydraulic service centers which does not authorized by BELIUM.
-
Page 3: Specifications
No oil leaking and shortage of parts. If you find any problem please contact with your nearest authorized BELIUM Service Center or Sales office. To successfully connect with the hand pump, please refer to Figure 1 and follow the steps below. - Page 4 HANGZHOU BEILIMU IMP.& EXP. CO., LTD Teflon tape on thread, leaving one or two complete thread free to prevent taps shed into hydraulic system. Any tape lose in hydraulic system, may jam the oil flow. For step 2 and step3, we strong suggest you to use pressure gauge when you use hydraulic system.
-
Page 5: Operation
Please do not use extension handle, extension handle will damage the pump. 6. MAINTENANCE 6.1 Please always use clean BELIUM oil or other approved hydraulic oil with these cylinders. Use other unapproved oil or dirty oil will damage the hand pump. -
Page 6: Troubleshooting
HANGZHOU BEILIMU IMP.& EXP. CO., LTD 7. TROUBLE SHOOTING IMPORTANT: BELIUM hand pumps should be repaired only by a qualified operator or Authorized BELIUM Service Centers. Repair hand pumps without special tools and knowledge may result in personal injury. Please release pressure and disconnect hose(s) before making repair.