Advertisement
Quick Links
Installation Instructions
IMPORTANT: Before Installing
Please take the time to read through the ENTIRE instructions prior to starting any work.
Precautions
1. Ensure normal safety precautions are taken when using tools and walking on roofs.
2. Do not cut any structural members in the house.
3. Measure twice and cut once.
Tools Required
• Reciprocating Saw
• Marking Pen
• String
Components
Note: Exploded view for illustrative purposes.
Unit comes pre-assembled.
1. (2) #8 Phillips Head Screws/Clip Assembly
2. Custom Solar Panel
3. Wire Lead
4. Adjustable Solar Panel Bracket
5. Aluminum Shroud
6. Custom DC Motor
7. Motor Isolation Bracket
8. Air Drive Precision Pitch Blade
9. 4" x 48" Stainless Steel Wire Mesh
10. Rugged 14 Gauge Shroud Support Bracket
11. (6) #6 x 1 1/2" Stainless Steel Phillips
Head Screws
12. Aluminum Flashing
• Caulking Gun
• Screw Gun
• Ladders
11
12
• Measuring Tape
• Razor Knife
1
2
3
4
5
6
7
8
9
10
10821 North 23rd Avenue
Phoenix, AZ 85029
800-363-9865
www.solaratticfan.com
Advertisement
Related Manuals for Natural Light Solar Attic Fan
Summary of Contents for Natural Light Solar Attic Fan
-
Page 1: Installation Instructions
Installation Instructions 10821 North 23rd Avenue Phoenix, AZ 85029 800-363-9865 www.solaratticfan.com IMPORTANT: Before Installing Please take the time to read through the ENTIRE instructions prior to starting any work. Precautions 1. Ensure normal safety precautions are taken when using tools and walking on roofs. 2. - Page 2 Installation Pointers When determining location of the unit, try to place the solar attic fan on the south side of the roof, also consider potential problems such as objects shading the unit during certain times of the day. The unit should also be centered on the roof and the center of the unit should be about 2 feet down from the roof ridge.
- Page 3 Step 6 Insert the reciprocating saw blade sideways at the three o’clock position and commence cutting the roofing nails up and around to the nine o’clock position. This process removes the nails that will prevent the flashing foot print from sliding up underneath the shingles. Step 7 Caulk underside of flashing with the provided caulking material.
- Page 4 IMPORTANT: PLEASE COMPLETE AND MAIL THE CARD BELOW AS SOON AS YOUR SOLAR ATTIC FAN IS INSTALLED. This card will serve as proof of your purchase, should you misplace your original invoice.