EZ Switch 10/100 User Guide From SMC’s EZ line of low-cost workgroup LAN solutions 38 Tesla Irvine, CA 92618 Phone: (949) 679-8000 Pub. # 150000021200B R01 Dec. 2002...
Page 4
SMC. SMC reserves the right to change specifications at any time without notice. Trademarks: SMC is a registered trademark; and EZ Hub is a trademark of SMC Networks, Inc. Other product and company names are trademarks or registered trademarks of their respective holders.
ARRANTY Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller.
Page 6
* SMC will provide warranty service for one year following discontinuance from the active SMC price list. Under the limited lifetime warranty, internal and external power supplies, fans, and cables are covered by a standard one-year warranty from date of purchase. SMC Networks, Inc. 38 Tesla Irvine, CA 92618...
Page 7
• Consult the dealer or an experienced radio/TV technician for help EC Conformance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II, Calle Fructuós Gelabert 6-8, 2 08970 - Sant Joan Despí, Barcelona, Spain.
Page 8
OMPLIANCES * Immunity to conducted disturbances, Induced by * Power frequency magnetic field immunity test * Voltage dips, short interruptions and voltage variations LVD: * EN60950(A1/1992; A2/1993; A3/1993; A4/1995; Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”...
All ports support MDI/MDI-X to facilitate your network expansion. Description of Hardware The EZSwitch™ 10/100, SMC-EZ6516TX, are 16-port Fast Ethernet switch featuring 16 10BASE-T/ 100BASE-TX auto-negotiation ports. These switches provide an ideal bridge between 10 Mbps and 100 Mbps Ethernet networks.
• Automatic polarity detection and correction • Desktop installation Front Panel LEDs The front panel of the switch provides status LEDs for “at-a-glance” system monitoring. The following table details the functions of the various indicators: LEDs Power Link/ Activity...
These EZ Switch 10/100 models feature 16 10BASE-T/ 100BASE-TX ports with RJ-45 connectors located on the rear panel of the Switch. Each port contains a built-in wiring crossover (MDI-X) that allows for the use of straight-through twisted-pair cable for connections to devices without built-in crossover ports (i.e., workstations,...
NSTALLING THE NSTALLING THE The EZ Switch 10/100 can be placed on a desktop or shelf and stacked with other devices using the provided 4 rubber foot pads Equipment Checklist After unpacking the EZ Switch 10/100, check the contents of the box to be sure you’ve received the following components: •...
Applying Power: Plug one end of the power adapter into the socket on the switch’s rear panel, and the other end into an appropriate electrical outlet. Check the Power LED to be sure power is on.
Link LED does not light after connection is made. Probable Causes Swith port, network card or cable may be defective. Possible Solutions • Check that the Switch and attached device are both powered on. • Be sure the network cable is connected to both devices.
ABLE PECIFICATIONS ABLE Cable Type and Connector Type Category 3, 4, 5 UTP 100 m (328 ft) Type Category 5 UTP RJ-45 Connector Pin Assignments Caution: An Ethernet or Fast Ethernet twisted-pair link segment requires two pairs of wires. Each wire pair is identified by two different colors.
Page 19
RJ-45 Pin Assign- ments Straight-Through Cable End 1 End 2 1 (Tx+) 1 (Tx+) 2 (Tx-) 2 (Tx-) 3 (Rx+) 3 (Rx+) 6 (Rx-) 6 (Rx-) Note: The “+” and “-” signs are used to represent the polarity of the wires that make up each wire pair.
PECIFICATIONS EZ Switch 10/100 General Network Interface RJ-45: 100 ohm, UTP cable 10BASE-T - Categories 3, 4, or 5 100BASE-TX - Category 5 LEDs Power - one Speed - one per port Link/Activity - one per port FDX - one per port...