OVERVIEW OVERVIEW The Belkin OmniView E Series KVM Switch allows you to control up to four computers, depending on the model, with one keyboard, monitor, and mouse. OmniView E Series KVM Switches support PS/2 input devices (keyboard and mouse); VGA, SVGA, XGA, and XGA-II video;...
• VGA • SVGA • MultiSync ® Optional Power Supply: An optional 9V 600mA power supply is available. Visit belkin.com for ordering information. OVERVIEW Unit Display Diagrams with Explanation The Front of the OmniView E Series KVM Switch: Port status...
Part No.: F1DB102P, F1DB104P Power: By PS/2 keyboard port or optional 9V DC, 600mA AC adapter with center pin positive polarity PCs Supported: 2 (F1DB102P), 4 (F1DB104P) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitor Supported: VGA and SVGA MultiSync, LCD (with use of adapter cable)
25 feet (7.5m) of the KVM Switch. Note: If your computer needs to be more than 25 feet (7.5m) from the KVM switch, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using standard CAT5 UTP cable.
The E Series KVM Switch emulates a mouse and keyboard on each port and allows your computer to boot normally. Your Belkin E Series KVM Switch should now be ready for use. You can select which computer to operate by either the push-button Selector Button located on the top panel of the E Series KVM Switch or through keyboard hot key commands.
Then you can press the [UP], [DOWN] arrow keys to switch between ports. You can switch directly to any port by entering the E Series KVM Switch port number you wish to use. For example, if you press [SCROLL LOCK], [SCROLL LOCK], [2], the computer on port 2 will be selected.
Other standard features found on this unit include: hot key functionality; keyboard and PS/2 emulations for error-free boot up; and a Belkin Two- Year Warranty. F1DB102P E Series 2-Port PS/2 KVM Switch F1DB104P E Series 4-Port PS/2 KVM Switch OmniView SOHO Series with Audio.
OmniView All-In-One Cable Kits provide you with the quality connections necessary to set up your KVM solution. Each kit provides all the cables and proper connectors to complete the installation of the Belkin OmniView Switch of your choice. All OmniView All-In-One Cable Kits offer full compatibility with Belkin KVM switches.
A: When using PS/2 connections, the E Series KVM Switch can be up to 25 feet (7.5m) away from your computer. If your computer needs to be more than 25 feet (7.5m) from the KVM switch, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4) away using standard CAT5 UTP cable.
FAQ E SERIES Q: Can I use the E Series KVM Switch to switch video signals only? A: Yes, you may use the E Series KVM Switch to switch between video signals only, without having to connect the keyboard and mouse.
Page 13
E Series KVM switch. • You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from the front of the E Series KVM Switch and waiting about 2-3 seconds before plugging it in again.
Belkin Components warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.