ACR Electronics Nauticast Y1-03-0204 Installation Manual page 43

Acr electronics automatic identification system installation manual
Table of Contents

Advertisement

Your passwords must meet the following criteria:
Minimum of six (6) characters, maximum of eight (8) characters
Letters must be in UPPER CASE
Acceptable characters are the A-Z alphabet and 0- 9 digits
Password may contain both letters and numbers
The User Password can be reset in the service configuration menu by entering the
Service Configuration menu and creating a new password.
Changing the Service Password
Select "Service Configuration" from the Main Menu with the cursor button [Up] & [Down] or
press Number 6 on the keyboard.
The password query field appears. Input default Service Password and press M5
[Enter]. The default password from the factory is mentioned on your AIS display at the
protection foil.
Please see the appendix in your User Manual for additional password information.
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
Select Submenu 1 "Change Service Password" with cursor button [Up] & [Down] by pressing
Nr. 1 on the keyboard.
Service Menu Example:
N 1
-----| |
View | +- 2. User Password Settings
-----| +- 4. Restore Factory Settings
Msg. |
-----|
Displ|
----------------------------------------
NUM| Select->|
Installation Manual
o
o
24' E
0
17' |1>0.10|2>1.30|3>1.80nm
Service password protected!
Please enter service password:
| Enter
|
|
o
o
21' E
0
14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
|
|
|
|
39
| Exit
|<-Back
Y1-03-0204 Rev.K

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nauticast 2607

Table of Contents