Dgps - Dgnss Channel 9; Alarm Circuit - Biit Channel 10; Proprietary Sentences - ACR Electronics Nauticast Y1-03-0204 Installation Manual

Acr electronics automatic identification system installation manual
Table of Contents

Advertisement

3.4.5 DGPS – DGNSS Channel 9
Field / Protocol information:
All fields are provided with further information; please refer to ITU-R M.823-2 / RTCM SC 104
for detailed field information.
3.4.6 Alarm Circuit – BIIT Channel 10
The AIS requires that an alarm output (relay) must be connected to an audible alarm device
or the ships alarm system, if available.
Alternatively, the BIIT (built-in integrity test) alarm system may use the alarm messages
output on the presentation port (ECDIS Port Channel 5), provided the ECDIS alarm system is
connected and AIS compatible.

3.4.7 Proprietary Sentences

The proprietary ACR NMEA sentences have the NMEA registered manufacture talker ID
"NAU". The $PNAU sentences are an addition to the standard sentences and offer other
manufactures full remote control to the Transponder. The NMEA interface developer‟s
manual includes the full description of how to use the proprietary ACR manufacturer
sentences.
List of ACR related proprietary sentences:
Proprietary NMEA-Sentences $PNAU
MID
Mobile (MMS) Id
ASD
Advanced Ship Data
RCS
Read Configuration Settings
STO - Set Transponder Options
TSI - Transponder State Information
SCR - Sensor Configuration Request
SCA - Sensor Configuration Acknowledge
SCD - Sensor Configuration Data
SCM - Sensor Configuration Mode
AIQ - Request status information from the Transponder
Installation Manual
11
Y1-03-0204 Rev.K

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nauticast 2607

Table of Contents