Table Of Contents - Siemens OPTISET NI-1200 Operating Manual

Issue 5, June 1999
Issue 5, June 1999
SUMMARY OF ISSUE ENHANCEMENTS
Issue 1
• Initial issue.
Issue 2
• Updated cover to remove implied exclusive EWSD product
association
Issue 3
• Updated cover to indicate that firmware releases through 2.06
are covered in the Operating Guide.
Issue 4
• Updated cover to indicate that firmware releases through 3.06
are covered in the Operating Guide.
Issue 5
• Reformalled entire document.
• Added information regarding operation of the Optiset terminal
with the DCO switching system.
• Updated book to reflect firmware releases through 4.06.
Iv 1275·00030
CONTENTS
1. INTRODUCING YOUR OPTISET TERMINAL 1
Programming Requirements 2
Switching System NalionallSDN Compliance Issues 2
Operating Components ..4
Display 4
Dialog Keys 4
Handset 5
Dial Pad 5
Feature/Line Keys 5
Status Lights 5
Faceplate Labels 6
Speaker 6
Microphone 7
Volume UpNolume Down Keys 7
Optional Headset 7
Types of Service Supported 8
Basic ISDN Terminal 8
Multiline Hunt Group 8
Basic Electronic Key Telephone Service 8
Call Appearance Call-Handling 9
Additional Call Offering 9
Terms That May Be New to You 10
2. BASIC CALL OPERATIONS 13
Place a Call (Using the Handset) 13
Place a Call (Using a Speed Dial Key) 14
Answer a Call (Using the Handset) 16
Answer a Call While Another Call Is Active
(Using a Line Key) 17
Place a Call On Hold (Using the HOLD Key) 1
B
Return to Any Held Call (Using the Associated
Line Key) 1B
Transfer a Call (Using the Transfer Key) 19
1275-00030
v