Place A Call On Hold (Using The Hold Key); Return To Any Held Call; Transfer A Call (Using The Transfer Key) - Siemens OPTISET NI-1200 Operating Manual

188ue 5, June 1999
For alternative ways to answer a call when another call is active.
refer to "Receive a Call (With Another Call Active)" in section 3.
ALTERNATIVE CALL OPERATIONS.
Place a Call On Hold (Using the HOLD Key)
Procedure Display
Issue 5, June 1999
Press the line key associated
555-55!J5 01:05:22
with the held call. Ilold? <>
The associated status light
The call timer continues to
goes steady on.
count.
Use the handset or the
555-5555
01:05:25
microphone and speaker to
Hold?
<>
converse.
For other ways to retrieve a call on hold, refer to "Retrieve a Call
(No Active Call Connected)" and "Retrieve a Call (With Another
Active Call Connected)" in section 3. ALTERNATIVE CALL
OPERATIONS.
Transfer a Call (Using the Transfer Key)
Procedure Display
For alternative ways to place a call on hold, refer to "Hold a Call" in
section 3.ALTERNATIVE CALL OPERATIONS.
Return to Any Held Call (Using the Associated Line Key)
Procedure
Display
A call is active.
555-5555 01:05:22
Hold?
<>
Press the Transfer key.
I
Oi
a
I :
The active call is placed on
hold, and a second line
provides dial tone.
Dial the number of the party
555-5565
to whom you want to transfer Cancel Transfer? (>
the call.
Lift
the handset to answer the
incoming call.
Use the handset to announce
that you are putting the calling
party on hold.
Press the HOLD key.
The line appearance light
begins to flash, indicating
a
held call.
5SS-SS55
01 :00: 00
Hold? <>
555-5555 01:00:12
Retrieve Line 1?
(>
The call timer continues to count
while the call is on hold.
NOTE: This procedure
555-5555 01:05:17
assumes that Line 1 is the
Retrieve line
11
(>
held call. The red status light
for that line is blinking.
1275·00030
1275·00030
18
I
19