Siemens Gigaset 3035isdn Operating Instructions Manual

Isdn comfort telephone with integral answering machine extendable up to 6 handsets
Table of Contents

Advertisement

Quick Links

Issued by
Information and Communication Products
Hofmannstr. 51
D-81359 München
© Siemens AG 2000
All rights reserved.
Subject to availability.
Right of modification reserved.
Printed in Germany. (3/00)
Siemens Aktiengesellschaft
http://www.siemens.com/gigaset
Order no.: A31008-G3035-B101-6-7619

ISDN comfort telephone
with integral answering machine
extendable up to 6 handsets
Operating instructions
Read the operating instructions and safety information carefully
before getting started!
*LJDVHW
3035
L V G Q

Advertisement

Table of Contents
loading

Summary of Contents for Siemens Gigaset 3035isdn

  • Page 1 6 handsets Issued by Information and Communication Products Hofmannstr. 51 D-81359 München © Siemens AG 2000 All rights reserved. Subject to availability. Right of modification reserved. Operating instructions Printed in Germany. (3/00) Siemens Aktiengesellschaft Read the operating instructions and safety information carefully http://www.siemens.com/gigaset...
  • Page 2: These Operating Instructions

    Only use the plug-in power supply unit provided, as indicated on the un- derside of your base station telephone. The system may interfere with medical equipment. Never give your Gigaset 3035isdn to a third party without the operating instructions. Dispose of your phone and the batteries in an environmentally responsible way.
  • Page 3: How To Use The Soft Keys

    A31008-G3035-B101-6-7619Korrektur: 0 How to use the soft keys Your Gigaset 3035isdn has a wide range of menu-controlled functions. These can be accessed using the two soft keys under the display. The functions and symbols above these keys change as the situation demands..
  • Page 4: Table Of Contents

    Adding the number of the called party to the telephone directory........28...
  • Page 5 ....... . 34 Telephone directory ........35 Saving call numbers .
  • Page 6 Registering the 3000 Classic handset – Restricting handset telephone access ..... . 99 Setting up a ring delay ....... . . 100 Answering machine.
  • Page 7 A31008-G3035-B101-6-7619 Operating at telephone systems ......136 Setting the prefix code ......136 Activating automatic explicit call transfer (ECT) .
  • Page 9: Getting Started

    Do not use the base station telephone in wet areas such as bathrooms or showers. Place the base station telephone on a level, non-slip surface. The station‘s feet should not normally leave marks on the surface on which they stand.
  • Page 10: Connecting The Base Station Telephone

    Push the handset cord into the cable guide. 2. Attach the other end to the handset. 3. Insert the phone cable on the base station telephone into the socket marked and push it into the cable guide.
  • Page 11: Display Language

    Type of connection Select “Main station” if the base station telephone is con- nected directly to the ISDN network. 17 .5.00 Press the keys in the specified order Select and confirm the re- quired language.
  • Page 12: Setting The Display Contrast

    17 .5.00 Betrieb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Getting started Press the keys in the specified order Each call number is automatically assigned its own individ- ual ringer melody, so that you will already know from the ring tone which of your numbers has been called. The ring- er melody can also subsequently be changed (see also page 69).
  • Page 13: Your Phone Thinks Ahead

    Press the keys in the specified order Your phone thinks ahead! Whatever the situation, the base station telephone will of- fer you the appropriate choices, even while you are making a call: follow the messages and symbols on the display.
  • Page 14: Using Handsets

    Press the keys in the specified order Using handsets You can use your base station telephone with up to 6 dif- ferent mobile phones. As well as Gigaset 3000 handsets, you can use handsets from the Gigaset 1000 and 2000 se- ries.
  • Page 15: Making Calls

    A31008-G3035-B101-6-7619 Korrektur: 0 Press the keys in the specified order Making calls Making an external call Normal calls within the public telephone network are re- ferred to as external calls. Using the handset Immediate dialling Lift the handset. Enter the call number.
  • Page 16: Ending A Call

    The display is highlighted when the function is active. To switch the setting: Activate/deactivate function. Handset: Call the menu and select “Service” , then > proceed as with the base station telephone. Handset: Press © ber in the usual way. 17 .5.00...
  • Page 17: Making Internal Calls

    There are two setting options. Immediate pickup With immediate pickup (factory setting), you interrupt the answering machine recording by lifting the handset. A message appears on the base station telephone display. Example: Pick up the call. The answering machine stops recording.
  • Page 18: Options Available During A Call

    Adding the number of the called party to the telephone directory During a call you can add the call number of the person to whom you are talking to the base station telephone direc- tory. The call number is displayed.
  • Page 19: Comfort Telephone Features

    Call number Select the required call number and open the supplemen- tary menu. The call number is added to the telephone directory. The input field for call numbers opens up. Numbers cannot be added if the memory is full. You can also enter a name (see page 171).
  • Page 20: Caller List

    Select a number/name from the caller list and lift the hand- set to dial. The call number is dialled immediately. ® The supplementary menu the call number in full, to transfer it to the telephone directory, or to change/delete it. Handset: Call the menu and select “Service” . >...
  • Page 21: Callback From Caller List With Call Number Of A Provider

    * and # in front of the relevant directory entries. Making a selection from the telephone directory Open the telephone directory. The first entry is displayed. e.g. Press key twice, for example to jump to the first entry un- der “E” .
  • Page 22: Changing/Displaying/Deleting Entries

    Open the telephone directory. Open the supplementary menu. Select. The base station telephone display shows all recipients (INTERN 1 to 6) to whom the telephone directory can be transferred. Intern 1...6 Select the required recipient. The list is sent. Sending individual entries –...
  • Page 23: External Callback When Busy

    Handset: Press © Accepting or rejecting callback The base station telephone rings and the display indicates the callback number. Lift the handset. You will be connected to the required sub- scriber; you will hear the ringing tone. Delete callback.
  • Page 24: Rejecting A Call

    Because the caller has no influence over the final des- tination of his call, the relevant charges are borne by you. The caller is only charged for the normal telephone costs to reach your connection. Setting up a destination call number An established destination call number makes call deflec- tion easier when a call is received.
  • Page 25: Deflecting A Call

    (T-Net box) should be used. External call forwarding (in device via 2nd B- channel) In factory setting, the base station telephone forwards the call via the second phone line of your ISDN connection. This means that both phone lines are busy for the dura- tion of a call.
  • Page 26: Setting Up The Call Forwarding Destination Via Exchange (External)

    17 .5.00 Komfort.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Comfort telephone features Press the keys in the specified order Setting up the call forwarding destination via exchange (external) ® Prerequisite: Call forwarding switched from inter- nal to external, see page 102. Call menu.
  • Page 27: Using The Base Station Telephone As An Intercom System

    Intercom – This feature is activated from a handset. When in the vicin- ity of the base station telephone, you can use the station as an intercom system, enabling you to answer calls with- out lifting the handset. The function must have been en- abled on the base station telephone, see page 68.
  • Page 28: Cost-Effective Telephoning

    To control this better, we recom- mend setting the counter on your base station tele- phone to “0” on this date. The data on the telephone bill may differ from the base station telephone displays for technical rea- sons. The provider‘s counter and cost calculations are always binding.
  • Page 29: Cost Conversions In The Exchange

    Your provider converts from “transmission of units” to “transmission of individual call charges” . The following message then appears on your base station telephone dis- play: “Please change charge units: CostsCentr.Off.“ and a beep is emitted to signal an error.
  • Page 30: Displaying/Deleting Call Costs

    PIN is required before calls can be made. If no limit is entered for telephone accounts, then the un- limited total is calculated. This makes it possible to check the costs accrued by each PIN user.
  • Page 31: Activating/Deactivating Telephone Accounts

    Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Cost-effective telephoning Making calls using the account PIN If you have set up telephone accounts, the PIN for the ac- count to be debited must be entered before you make a call. ® Emergency numbers can be dialled without requir- ing a PIN.
  • Page 32: Clearing/Deleting/Displaying Telephone Accounts

    Deleting an amount Call menu. Select and confirm. Enter the base PIN (factory setting 0000) and confirm. The display shows all telephone accounts with their unit or cost counts. Account Select the required telephone account. The base station telephone resets the amount used to ze- ro.
  • Page 33: Network Access Calls/Providers

    Open the supplementary menu. Enter the name and prefix (max. 16 digits) of the provider, see page 171. ® If you are operating your phone at a telephone sys- tem: don‘t forget to add the prefix number(s) (see also page 136). Displaying/deleting entries The display shows a list of available providers.
  • Page 34: Telephoning With Multiple Subscribers

    The first call is placed on hold. Enter the call number of the second external subscriber. You can also select a number from the telephone directory. The connection is set up and the subscriber answers. To switch between the subscribers (toggle).
  • Page 35: Enquiry Call To An Internal Subscriber

    – Enquiry call from an internal call to an external – subscriber You are talking to an internal subscriber. Enter the call number of the external subscriber. You can also select this from the telephone directory. The connection is set up and the subscriber answers. Handset: Press ©...
  • Page 36: Parking

    Enter any one- or two-digit parking number. If no parking number is entered, press OK to activate parking. Confirm the number. Replace the handset; the base station telephone is in standby. The maximum parking time in the exchange is three min- utes.
  • Page 37: Speaking To The Subscribers Individually

    17 .5.00 Mehrere.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Telephoning with multiple subscribers Press the keys in the specified order Handset: Press © select the call number of the external subscriber. The subscriber answers. To set up a three-party conference: press Speaking to the subscribers individually You have set up a three-party conference and now wish to speak to the subscribers individually: This switches to the subscriber with whom you were orig-...
  • Page 38: Individual Telephone Settings

    17 .5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Individual telephone settings Press the keys in the specified order Individual telephone settings Date and time The date and time are updated automatically each time an outgoing connection is established. You can, however, de- fine the display format.
  • Page 39: Setting The Date Format

    The phone is in standby. ® The language of the user guidance system on the base station telephone does not have to be the same as the language set on the registered hand- sets. Einstellungen ->Telefon-Einstell -> Sprache -> Deutsch Settings Tel.
  • Page 40: Enabling Room Monitoring/Intercom

    (MSN) when external calls are received, see page 90. Setting the ringer volume The base station telephone has 5 volumes and a “Cre- scendo” ring. The “Crescendo” ring means that the ringer on the base station telephone starts quietly and gets pro- gressively louder.
  • Page 41: Setting The Handset Volume

    17 .5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Individual telephone settings Press the keys in the specified order Setting the handset volume Call the menu. Select and confirm. Select and confirm. Volume Select and confirm the required handset volume The phone is in standby.
  • Page 42: Using Function Keys

    Press the keys in the specified order Using function keys The base station telephone has 4 function keys that can be set with functions or call numbers. The functions are exe- cuted or the stored call numbers are dialled when the func- tion keys are pressed.
  • Page 43: Setting With Call Forwarding

    17 .5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Individual telephone settings Press the keys in the specified order – Setting with call forwarding You can set immediate call forwarding on a function key; the forwarding route set on page 101 then applies (internal/ external).
  • Page 44: Setting Up Short Cuts

    The list of short cuts scrolls to the first entry under this letter. After a connection has been established, you can also use the short cuts of your base station telephone from the Comfort handset. Handset: Call the menu and select and >...
  • Page 45: Receiving A List Of Short Cuts

    Setting up and using a new menu You can set up an “extra menu” of your own on the base station telephone with up to 7 sub-items. It is a good idea to use the features provided by your provider, e.g. to con- trol an external answering machine in the network.
  • Page 46: Starting A Menu Item

    17 .5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Individual telephone settings Press the keys in the specified order Starting a menu item Call the menu. “My Menu“ Select your newly created menu. Menu item Select the required menu line. Lift the handset or press the speaker key.
  • Page 47: Security

    Security Activating the base lock You can lock your base station telephone and all registered handsets to prevent outgoinsg calls. Your phone is there- ofre protected against unauthorised users. You can listen to your answering machine by means of the answering machine keys.
  • Page 48: Changing The Base Pin

    128. Hot key selection You can disable your telephone for outgoing calls and still permit a saved hot key number to be dialled. All your child has to do, for example, is to press this key in order to con- tact you.
  • Page 49: Deactivating Hot Key Selection

    Using emergency numbers The emergency number 112 is pre-programmed at the base station telephone. You can set up 4 more call num- bers (e.g. your doctor‘s number). These emergency num- bers apply to the base station telephone and all registered handsets.
  • Page 50: Restricting Dialling

    Enter a restricted number of up to 16 digits. Open the supplementary menu. Select and confirm. The phone is in standby. ® If your phone is operated at a telephone system: don‘t forget the prefix code number(s) (see also page 136)! 17 .5.00 Sperre.fm...
  • Page 51: Setting Up The Connection

    Advantages: Internal subscribers can be dialled directly. The telephone costs can be split up as the costs for each call number are recorded separately (e.g. home/of- fice). 17 .5.00...
  • Page 52: Displaying The Settings For Your Own Call Numbers (Msn)

    Registering handsets Handsets must be registered before they can be used with the base station telephone. Each handset is allocated its own internal call number. The new handset is first automatically assigned all saved ISDN call numbers, i.e. it can be reached using all call num- bers.
  • Page 53: Registering The Comfort 3000 Handset

    Press the soft key under “ YES ” . Enter PIN: Enter the base PIN of the base station telephone (factory setting 0000) and confirm with “OK” . The hands-free talking button flashes to confirm the regis- tration procedure. Int. 1 Int.
  • Page 54: Preparing The Base Station Telephone

    Press the keys in the specified order Preparing the base station telephone The telephone is ready for registration. For your own secu- rity, the time available for registration is limited to one minute. Otherwise, the following error message appears on the display “Reg. Procedure cancelled“ . If the time has elapsed, you can repeat the procedure at any time.
  • Page 55: Allocating A Name To An Internal Subscriber

    – Allocating the send MSN If several call numbers are entered for one internal sub- scriber, e.g. INT 0 for the base station telephone, then the first MSN entered in the list is the send MSN for the time being.
  • Page 56: Allocating Receive Msns

    Call the menu. Select and confirm. Int 0...6 and 9 Select the required internal subscriber. (0 = base station telephone phone, 1...6 = Handsets, 9 = Answering machine) The allocated MSNs are highlighted. MSN 1 ... 7 Select and allocate the required MSN or withdraw alloca- tion.
  • Page 57: Setting Up A Ring Delay

    MSN call number. For example, calls on your private number should only ring at your handset after 3 rings on the base station telephone (the base station telephone rings from the first ringing sig- nal), while calls on the business number should ring imme- diately.
  • Page 58: External Call Forwarding Via Exchange

    External call forwarding via exchange You can set the base station telephone in such a way that a call from an external subscriber is forwarded via the ex- change. This means that both lines of your ISDN connec- tion remain free.
  • Page 59: Answering Machine

    You can also operate the answering machine remotely from the handset and from any telephone equipped with an AF transmitter. This means that you can play back and delete your messages or call back the caller from a pay- phone/cellphone, for example.
  • Page 60: Activating/Deactivating The Answering Machine

    > © machine – Your answering machine is ready for operation as soon as the base station telephone is put into service. To deactivate: Press the AM key. The light goes off. To activate: Press the AM key. The key lights up.
  • Page 61: Recording Memos

    Stop recording. Handset: menu, menu item “Service Set up” > and menu item “Answering mach.“ . Then proceed in the same way as for the base station telephone. Handset: . Wait for the confirmation tone © then press the digit keys .
  • Page 62: Playing Back Messages/Memos

    , press to call the menu > and confirm menu item “Answering mach.“ . Then continue as for the base station telephone. Handset: Wait for the confirmation tone © and press . For a complete list of remote replay...
  • Page 63: Returning A Call

    Handset: menu, menu item “Service Set up” > and menu item “Answering mach.“ . Then continue as for the base station telephone. – with network provider prefix Prerequisite: the caller’s phone number is transferred. Call up the AM menu. Select and confirm.
  • Page 64: Options During Playback

    Handset: menu, menu item “Service Set up” > and menu item “Answering mach.“ . Then continue as for the base station telephone. Handset: Wait for the confirmation tone, © then press . For a complete list of remote re-...
  • Page 65: Fast Deletion

    17 .5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Answering machine Press the keys in the specified order Fast deletion – For the fast deletion of messages on the base station tele- phone/3000 Comfort handset. to delete the played back message immediately. Using automatic time control With the automatic time control function you can activate/ deactivate the answering machine or change from one an-...
  • Page 66: Changing From One Announcement To Another (Daily)

    17 .5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Answering machine Press the keys in the specified order Go back up one menu level. The marking next to the menu item “Time Control” indi- cates that this function is active. The phone is in standby. Changing from one announcement to another (daily) You want to have the answering machine switched on with...
  • Page 67: Changing The Recording Length

    Setting the language You can change the language for prompts. The factory set- ting for your telephone is remote operation with voice an- nouncements. If this is not the language that you require (German or English), switch to operation using tones.
  • Page 68: Setting Tones Only

    17 .5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Answering machine Press the keys in the specified order Setting tones only Call up the AM menu. Select and confirm. Enter and confirm the system PIN (factory setting is 0000). Function marked = on/not marked = off. To change the setting: Activate/deactivate function.
  • Page 69: Changing The Am Pin

    ® If you are using the remote replay function from an older telephone, you will need to use a tone gener- ator or switch this telephone to DTMF . Prerequisites for using remote replay You must have changed the AM PIN at least once.
  • Page 70: Remote Operation

    Activating the AM remotely If you have forgotten to activate your answering machine you can do so remotely. Let your telephone ring for at least 1 minute. You hear the prompt: “Enter PIN” .
  • Page 71 17 .5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Answering machine Press the keys in the specified order Recording announcements  Announcement 1  Announcement 2  Advisory announcement  Concluding announcement Playing back announcements Announcement 1 Announcement 2 Advisory announcement Concluding announcement Setting the mode Announcement 1 Announcement 2...
  • Page 72: About Your System

    Gigaset repeater (available from specialist stores). Radio transmission Radio transmission between the base station telephone and the handset is based on the international DECT standard. The base station telephone com- plies with current European regulations. In the event of image or sound distor- tion with satellite reception devices, please contact a specialist store to have your satellite reception unit checked for shielding defects.
  • Page 73: Warranty

    In the event of a malfunction, please contact the dealer. Gigaset 3035isdn is designed for operation in your country as indicated on the underside of the unit. Special country-specific features have been implement- ed.
  • Page 74 When call forwarding Internal forwarding is is active, the forward- active. ing conditions are not displayed. The telephone rings The call number is in when there are fax PC the call number list of calls. the base station tele- phone.
  • Page 75: Technical Data

    Do not place the base station telephone in direct sunlight. Caring for your equipment Wipe the base station telephone and handset clean with a damp cloth or anti- static cloth. Never use a dry cloth, as this may result in the build up of a static charge.
  • Page 76: Appendix

    Appendix Using CENTREX features CENTREX (CTX) is the name of a virtual ISDN telephone system. In order to take advantage of all the features it of- fers, you can activate the keypad protocol in addition to the usual dialling procedure in call switching.
  • Page 77: Dialling Properties

    Set up” . Then proceed as with the base station telephone. Dialling * and # This dialling procedure can be used to control individual telephone functions when operated on telephone sys- tems. Automatic tone dialling is always activated as soon as the called party‘s phone rings. Call the menu.
  • Page 78: Operating At Telephone Systems

    Classic handset on page 59. Setting the prefix code If you are using your base station telephone on a tele- phone system, then you have to dial a prefix code (ex- change code) to access the public telephone network. The operating instructions for the telephone system will ex- plain the prefix code.
  • Page 79: Changing Long Distance Dialling Codes

    Changing device data The factory settings reflect the optimum settings for the base station telephone. It is only necessary to alter data on an individual basis in exceptional circumstances. Activating hands-free dialling When this function is activated, the pressing of a digit key immediately causes a line to be seized and this number to be dialled without lifting the handset.
  • Page 80: Restoring Factory Settings

    The following settings must be made when you register a repeater at the base station telephone. They guarantee that the base station telephone and repeater work togeth- er for optimum performance. Call the menu.
  • Page 81: Gigaset 3000 Classic Handset Operating Procedures

    If an answering machine is connected to the cordless TAE, you should set the device type as “answering machine” . This will enable you to pick up calls immediately from the base station telephone or from a handset during recording. Setting/ Forwarding effect...
  • Page 82: Using The Base Station Telephone With Gigaset 1000 And 2000 Series Handsets

    2000 series handsets You can use handsets from the previous series with your base station tele- phone. Prepare your base station telephone for registration as described be- fore. The procedure on the handset is described in the operating instructions for the relevant handset.
  • Page 83: Isdn Glossary

    Because the caller has no influence over this final destination (e.g. to a mobile phone), you pay the charges incurred. The caller is simply billed for the normal telephone charges to reach the con- nection he dialled.
  • Page 84 D-channel. Charge display See “AOC-D“ and “AOC-E“ . CLIP (Calling Line Identification Presentation) Subscriber A calls B. B can see A‘s call number on his telephone display. CLIR (Calling Line Identification Restriction) Deactivate transfer of own call number. Korrektur: 0 17 .5.00...
  • Page 85 No other analog terminals should be connected to the telephone socket. ISDN terminals and other ISDN sockets are connected to the NT. Open listening A touch of a button enables all those present in the room to hear a telephone conversation via the integral loudspeaker. See also hands-free talking. Gigaset3035isdn...
  • Page 86 A31008-G3035-B101-6-7619 ISDN glossary Park You park a call when you move a telephone during a call or if you want to continue your call at another phone on the same line. The connection is maintained for this period. Abbreviation for Personal Identification Number. Protects against unautho- rised use, for example base PIN, answering machine PIN, handset PIN.
  • Page 87 17 .5.00 Glossar.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 ISDN glossary Press the keys in the specified order...
  • Page 88: Index

    AM PIN 122 set type 71 deactivating time stamp 120 Call number improving quality 117 adding a call number to the telephone number of rings 121 directory 28 open listening 118 allocation to a function key 72 picking up calls 26...
  • Page 89 17 .5.00 Gig3030iSIX.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Index saving in the telephone directory 35 Connecting the phone 14 setting MSN ringer melody 90 Contents of the package 13 Call pickup from AM 70 Controlling costs 48 Call restriction Cordless telephone terminal box (TAE) 141...
  • Page 90 79 starting 77 Unit display 48 transmitting list of short cuts 77 User-defined menu 79 Siemens Telephone Service 128 Using handsets 22 Storing call restriction numbers 86 Suffix dialling 35 Volume setting handset 28...
  • Page 91 *LJDVHW 3035 L V G Q >> *LJDVHW 3035 L V G Q Answering machine...
  • Page 92: Accessories

    You can use all the usual handset functions available from the base station in this extended radio range. All units, accessories and batteries are available from your dealer or from the Siemens Service Shop on the Internet at: https://communication-market.siemens.de/serviceshop/default.asp * not available in all countries Accessories...
  • Page 93 17 .5.00 Umschlag_h.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Entering letters, numbers and symbols Prerequisite: The telephone is in input mode, i.e. you are currently making an entry, e.g. a name. Operating principle The letters allocated to the keys appear on the keys. Press the key repeatedly until the letter you want appears on the display.
  • Page 94 17 .5.00 Umschlag_h.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0 Gigaset 3035 ´ Mark message as new Remote re- play from handset during playback Remote replay last record.heard in pause status when in transit Delete message during playback individual messages Playback after playback all messages Set mode Recording after announ.

Table of Contents