Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99 Operating Instructions Please read the safety precautions outlined in these operating instructions before putting the telephone into service (page VII). ACHTUNG! Schnittkante ggf. auf Titelseite nach außen versetzen wg. Falz-Ausklappseite...
Page 2
The first telephone call Customising the telephone Using the answering machine Correcting functional defects The fastest way to get up and running Profiset 70isdn, GB: A30853-X300-B501-3-7619 Putting the telephone into service page 6). Conducting a call ( page 46). Defining telephone settings ( 16).
20.5.99 Profiset 70isdn Overview: Keys Profiset 70isdn, GB: A30853-X300-B501-3-7619 > Next key Activates a menu and scrolls forward through the menus. < Previous key Activates a menu and scrolls backward through the men- When entering numbers or letters, this key deletes the previous character.
Profiset 70isdn, GB: A30853-X300-B501-3-7619 These keys are available after you activate the answering machine menu by pressing Back key When playing back messages, this key rewinds to the to the start of the message or to the previous message.
There is always the danger of small objects being swal- lowed by young children. In the case of the Profiset 70isdn, this applies in particular to the connecting cord clip. Please make sure that such items are not accessible to children.
Safety precautions and approval Approval and conformity & Profiset 70isdn, GB: A30853-X300-B501-3-7619 Your Siemens Profiset® 70isdn has been certified by the "Bundesamt für Zulassungen in der Telekommunikation" (Federal German Bureau of Certification for Telecommu- nications). It may thus be connected to and operated in any ISDN multi-device connections and ISDN PBXs.
Maintenance Removing and inserting the labelling cards Filling out and affixing the fire/emergency label Profiset 70isdn, GB: A30853-X300-B501-3-7619 To clean the telephone, use a damp or anti-static cloth. Never use any abrasive cleaning agents. Do not use a dry cloth as the electronics may be damaged by static electricity! Your telephone is supplied with two labelling cards.
Length of message: Answering machine memory: Profiset 70isdn, GB: A30853-X300-B501-3-7619 Your Profiset 70isdn supports all ISDN features, e.g. tog- gle, park or conference. The selection of features available depends on your network provider and the selected tariff group (e.g. basic connection or enhanced connection).
1 s tone with 400 Hz and a 1 s-pause Your Profiset 70isdn telephone should only be passed onto third parties if the instructions for use are included. When the system has reached the end of its service life, it should be disposed of in an environmentally friendly manner in accordance with the relevant legislation.
Always retain receipts as proof of date of purchase. Over this warranty period, Siemens AG will rectify all ma- terial or manufacturing defects by repairing or exchanging the defective terminal. Siemens AG reserves the right to fulfil the warranty conditions by repairing or replacing the defective terminal.
27512152 Thailand 29383610 United Kingd. 990334411 Siemens Service should only be contacted if problems develop with the device. Your specialist dealer will be happy to answer any questions concerning unit operation. Contact your network operator for questions concerning telephone connection.
Press the appropriate key. In some cases, display messages are provided, e.g.: MSN missing Configuration? > Many of the Profiset 70isdn functions can be selected via menus. Menu selection is illustrated as follows: ? > ? > 5=audio? For information on display-prompted operation of Profiset 70isdn, see page 12.
Page 19
Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99 Putting the system into service Profiset 70isdn ISDN connecting cord Handset Handset cord (coiled)
Feed the ca- ble into the cable run. In both cases, the connectors must engage audibly. Note that the NTBA plug must be connected to the power grid. Profiset 70isdn takes the necessary power from this NTBA.
ISDN socket. Feed the cable into the cable run. In both cases, the connectors must engage audibly. If you have connected the Profiset 70isdn correctly, the following message now appears on the telephone dis- play:...
20.5.99 Putting the system into service Step 4: Setting the user language and the national version Profiset 70isdn,GB: A30853-X300-B501-3-7619 You can return to the telephone default settings after completing the procedure for entering MSN numbers by pressing If you wish to use a different language, the procedure is...
Step 6: Try out the telephone Profiset 70isdn, GB: A30853-X300-B501-3-7619 Putting the system into service If you are operating your Profiset 70isdn at a telecommu- nications system (private branch exchange), you must program a trunk code in accordance with the configura- tion of the system.
During a call, the current switching status is dis- played. The settings and enhanced functions of the Profiset 70isdn are accessed via menus. The lower line of the dis- play shows a line from a menu (menu item). Use the keys to "scroll"...
Representation of menu selection in these operating instructions Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 Display-driven telephone operation The following sample sequence shows you how to set the volume of the ringing tone. In this case, the telephone must be idle. (Idle state) 14.11.97 18.52 >...
20.5.99 Display-driven telephone operation Structure of Profiset 70isdn menus When the telephone is idle: Main menu > Call list ([n] new)?* Scroll: Display call(s)?* Resume? Forwarding? Service? * At least one entry required for display. Profiset 70isdn, GB: A30853-X300-B501-3-7619...
Page 27
Private? Scroll for- All? ward with: > Only if the menu item "Telephone directory division" is activated in the Service -> local functions menu. Profiset 70isdn, GB: A30853-X300-B501-3-7619 Display-driven telephone operation Consultation? Disconnect + return? Toggle? Conference?* Disconnect + return?
> Changing/deleting your password Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can define a password to protect against unauthor- ised settings on your telephone. The password is a 4-digit secret number. The following telephone functions can then only be activated after the password has been en-...
20.5.99 Call processing type Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings Enter the old password. For security reasons, when you are entering the password, the digits you input are repre- sented on the display as symbols only. Backspace to delete with To change the old password: enter the new password.
Select the call processing type. Save the setting. A trunk code must be defined if your Profiset 70isdn is op- erated in a private branch exchange (PBX). In this case, enter the digit(s) used by the telephone to access the public telephone network (see the operating instructions for your PBX).
> User language > Service? <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings You cannot change an MSN if forwarding is acti- vated for it (see If you do not enter any MSNs, all directory num- bers assigned to the NT are accepted.
Loudspeaker volume Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 The date and time are preset with zeros by default. The correct date and time are set automatically by the switch- ing centre the first time an outgoing call is set up. If your network provider does not support this service, you can program the date and time yourself.
Service? Ringer tone > Service? Handset volume Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings You can set the volume of the call signal to eight levels. The volume is preset to level 5. ? > ? > 5=audio? Enter a value between 1 and 8 or select: <>...
Service? <> <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can optimise the acoustic properties of Profiset 70isdn as appropriate. You can choose between normal, echoing and attenuated rooms. This setting applies to the handsfree function ( page 55). ? > ? >...
Service? Activating/deactivating the summation meter for charges Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings If the individual meter is activated, the accrued charges are indicated for approx. 3.5 seconds in the telephone dis- play following each call you make which is liable for charg- ? >...
Clearing the summation meter > Service? Activating/deactivating your own directory number display Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 The summation meter for charges can be cleared at any time. The summation meter then restarts at 0. ? > ? > 3=local functions? With password protection ( word.
20.5.99 Activating/deactivating display of caller’s number > Service? Permitting/barring info texts > Service? Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings The directory numbers of callers with ISDN connections can be displayed if desired. ? > 2=configuration? With password protection ( word.
If it was enabled, it is now disabled. You can set whether or not the "forwarding" option ap- pears in the main menu of your Profiset 70isdn. You must apply to your local network provider for the call forwarding feature.
Save the setting. If room monitoring was previously deac- tivated, it is now switched on. If it was activated, it is now switched off. You can lock your Profiset 70isdn against unauthorised use: Direct station selection (babyphone) only allows you to dial a preset DSS number (procedure 59).
Page 40
Emergency numbers can also be dialed when the total lock feature is activated. You can program 2 emergency numbers. Your Profiset 70isdn comes with two prepro- grammed emergency numbers, namely, 110 for emergen- cy number 1 and 112 for emergency number 2.
Page 41
If it was previously activated, it is now deactivated. You can program specific ranges of numbers that cannot be dialed from your Profiset 70isdn. These ranges can in- clude, for example, international numbers or service num- bers. You can program up to nine lockout numbers.
Page 42
> <> Activating/deactivating collective lockout Service? > Profiset 70isdn, GB: A30853-X300-B501-3-7619 Select "Change". Enter the required range of numbers (e.g. "00"). You can enter up to five digits. Backspace to delete with delete the entire lockout number, press digits are displayed.
Service? > Clearing memory > Service? <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings <> Select "switch over?". Save the setting. If the collective lock was previously de- activated, it is now activated. If it was previously activat- ed, it is now deactivated.
Service? Profiset 70isdn, GB: A30853-X300-B501-3-7619 It may take several seconds to clear the memo- ry. The display remains frozen during this time. The Profiset 70isdn can be reset to the factory default set- tings. ? > 3=local functions? Press "4".
> Service? Area code > Service? Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming telephone settings The international access code (code for connections abroad) is required for the comparison of the recorded di- rectory numbers received via CLIP/COLP . For an explana- tion of the abbreviations CLIP and COLP , see the ISDN glossary ( page 94).
( page 47). You can divide your Profiset 70isdn telephone directory of your Profiset 70isdn into a general and a private section. If you have defined a password ( section of the telephone directory can only be accessed by entering this password.
Page 47
20.5.99 Profiset 70isdn, GB: A30853-X300-B501-3-7619 Managing the telephone directory The following overview shows all the characters you can enter: A = 1 time 2 1 = 5 times 1 B = 2 times 2 2 = 4 times 2...
Managing the telephone directory Selecting entries from the telephone directory Profiset 70isdn, GB: A30853-X300-B501-3-7619 If you want to dial a number from the telephone directory page 47) or else change ( page 37) or delete page 40) a stored user, you must first select the re- quired entry from the telephone directory.
<> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Managing the telephone directory You can store up to 127 users in the telephone directory. Press the "Telephone directory" key to activate the tele- phone directory menu; the LED lights up. If you have divided your telephone directory into a general and private section, select "General?"...
You can scroll to similar names with Directory numbers from other memory areas of the Profi- set 70isdn can be transferred to the telephone directory. When the telephone is idle, you can transfer directory numbers from:...
Page 51
Transferring directory numbers during a call Telephone directory <> <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Managing the telephone directory Activate the telephone directory menu. If you have divided your telephone directory into a general and private section, select "General?" or "Private?" or "All?".
<> Clearing the telephone directory Service? > <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Existing entries can be deleted from the telephone direc- tory. Activate the telephone directory menu. If you have divided your telephone directory into a general and private section, select "General?" or "Private?" or "All?.
Service? <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming keys on the telephone The programmable keys on your Profiset 70isdn can be assigned frequently dialed directory numbers or frequent- ly used features. You can also overwrite the default key assignment. The features assigned by default to specific keys can be reas- signed at any time to a key of your choice.
Profiset 70isdn, GB: A30853-X300-B501-3-7619 The programmable keys on your Profiset 70isdn can be assigned frequently used telephone functions. ? > 4=feature keys? With password protection ( word. Press the key you want to program with the function.
Service? Configuring the joker key > Service? <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming keys on the telephone You can clear the key programming which is assigned a di- rectory number or a function. The key is then no longer programmed.
?o ? Option 2 > Service? Profiset 70isdn, GB: A30853-X300-B501-3-7619 Press the programmed joker key. Select a function that you want to perform once and con- firm. Or enter the number of the function directly (see ta- ble below). The function is then immediately executed.
Page 57
20.5.99 Shift ?o ? Activating keys on the second level Shift Profiset 70isdn, GB: A30853-X300-B501-3-7619 Programming keys on the telephone With password protection ( word. Press the Shift key. Press the key you want to program on the second level.
Dialing directory numbers using destination dialing keys (automatic dialing) Destination dialing or c and g Profiset 70isdn, GB: A30853-X300-B501-3-7619 Lift the handset. Enter the directory number. The directory number is dialed. When the user answers, the display shows "Consultation?" and possibly the number of the user.
<> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Outgoing and incoming calls If you stored a user in the your Profiset 70isdn’s electronic telephone directory, you can dial this user by entering his/ her name. Press the "Telephone directory" key; LED lights up.
21). If the caller is an ISDN user, his/her directory number is shown in the display. The name of the caller is displayed if it is stored in the Profiset 70isdn telephone di- rectory. You can conduct the call via the handset or you can acti- vate the handsfree function ( Alternatively, you can reject the call.
The directory number, if known, is transferred to the call list. You can temporarily reject calls to your Profiset 70isdn while you nonetheless continue to make calls. In this case, you must have programmed a key with the "Do not disturb"...
Page 62
Select "Reject call?" and confirm. The second caller hears the busy tone. You must apply to your local network provider for the cor- responding feature (ECT). Your Profiset 70isdn must be configured accordingly ( You are conducting a call and want to forward the incom- ing second call to another user.
LED goes out. All calls are then signalled by tone ringing again. You can set your Profiset 70isdn to accept calls automat- ically. In this case, you must have programmed a key with the "Automatic call acceptance" function ( When this function is activated, the "Automatic call ac-...
Page 64
Dialing a number from the call list <> Clearing a number from the call list <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Prerequisite: The call list contains three new entries, for example. Confirm "Call list (3 new)?" or press the "Call list" key; LED flashes.
If you are conducting a call when the callback call is re- ceived, you will be called back after you have finished this call. Your Profiset 70isdn can activate up to five callbacks which are stored in the callback list. You network provider may not authorise all five activatable callbacks, however.
<> <> Ending a call – disconnecting a or Loudspeaker Profiset 70isdn, GB: A30853-X300-B501-3-7619 Prerequisite: you activated a callback. Select "Display call(s)" and confirm. The first callback entry is displayed. Select "Clear callback?" and confirm. The selected callback entry is deleted and the next call- back is offered for deletion.
To switch off the loudspeaker press the "Loudspeaker" key again; LED goes out. Even when the telephone is on-hook you can converse using the handsfree feature on Profiset 70isdn (see also "On-hook dialing" page 46). In this case, the micro- phone and loudspeaker are switched on.
Loudspeaker Switching to mute (consultation in the room) Mute Mute Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can adjust the loudspeaker volume with the keys during a call with the handset on-hook. Prerequisite: you are conducting a call, the handset is on- hook, and the loudspeaker and microphone are switched Lift the handset.
Confirm and replace the handset. You can program a "Park/resume" function key page 42). You can resume a parked call from your own telephone or from another telephone. Prerequisite: a call is parked and you are not conducting a call.
Convenient and secure telephone communication Charge display Charge display Tracing a call (MCID) Profiset 70isdn, GB: A30853-X300-B501-3-7619 You must apply to your local network provider for this fea- ture (premium rate access). There are two methods of transferring call charge information: Call charge information is only transferred at the end of the call.
The calling party’s number, the time and the date are recorded. A printout of the list is issued later. You can lock your Profiset 70isdn against unauthorised use: Direct station selection (babyphone) allows you to dial a preset direct station selection number (pro-...
Convenient and secure telephone communication Only emergency numbers can be dialed (total lock) c or Loudspeaker Info texts Profiset 70isdn, GB: A30853-X300-B501-3-7619 If you enter a lockout number, an acoustic alarm sounds and the display shows "Number barred". Prerequisite: the emergency numbers are programmed and a total lock is activated.
<> Reading info texts read info text DTMF signalling Keypad signalling DTMF signals: off Profiset 70isdn, GB: A30853-X300-B501-3-7619 Convenient and secure telephone communication Prerequisite: "info text" is permitted ( ? > ? > 4=feature keys Select and confirm info text.
DTMF signalling with point-to-point configuration Keypad-signalling with point-to-point configuration * "S extension" refers to Siemens 8818/A6 systems and the Octopus systems available from Deutsche Telekom AG. Profiset 70isdn, GB: A30853-X300-B501-3-7619 Reactivate DTMF signalling Press the illuminated feature key "DTMF signals: off".
Press the "MWI" key. The directory number of the mailbox is dialed. The voicemails are then played back. For incoming calls from other CENTREX users, Profiset 70isdn displays both the name and directory number of the caller. The directory number is displayed first, fol- lowed by the name.
Page 76
TREX features, CENTREX call processing must be set page 17). Because DTMF signalling is the default setting for Profiset 70isdn, this must first be deactivated. To do this, a key must be programmed with the function "24=DTMF sig- nals off?" ( page 42) .
(MSN) (e.g. the "if busy" forwarding number may be different to the "deferred" number). MSN 1 to MSN 3 are intended for Profiset 70isdn; in this case only the telephone service is rerouted. Connection requests with different service identifiers, e.g. data or fax, are not forwarded.
Call forwarding is active for all calls under MSN 4. The call number "4=other?" must differ from the call numbers used for MSN1 to MSN3 that you set in Profiset 70isdn ( Prerequisite: call forwarding is active. Prerequisite: The "Forwarding" menu item is activated page 26).
< Deactivating an active call forwarding <> <> <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Select a new forwarding mode "immediately", "deferred" or "if busy" and confirm. The active call forwarding number is prompted. The number can be deleted by backspacing with edited with Confirm.
Rapid activation/deactivation of call forwarding <> Deactivating all call forwardings <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 There is a special speed switching function for the rapid activation and deactivation of call forwarding, enabling forwarding to be initiated or cancelled using prepro- grammed parameters.
<> <> Ending a consultation <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Calls involving two or more parties You can consult with another party in the course of a call. The first call is put on hold during the consultation call. Prerequisite: you are conducting a call.
<> Toggle Toggle Three-party conference Profiset 70isdn, GB: A30853-X300-B501-3-7619 In the course of a consultation call you can alternate (tog- gle) between the other two parties. The party who is wait- ing cannot listen in. You can program a "Toggle" key if you toggle frequently page 42).
Conference Ending a conference Ending a conference by disconnecting a party <> Profiset 70isdn, GB: A30853-X300-B501-3-7619 Calls involving two or more parties Prerequisite: you are conducting a consultation. Select "Conference?" and confirm or press the Confer- ence key; LED lights up.
Page 84
<> Transfer call a or Loudspeaker Profiset 70isdn, GB: A30853-X300-B501-3-7619 Prerequisite: you are conducting a conference. Select "Toggle?" and confirm or press the Toggle key. The Toggle key must be programmed ( Select the caller you want to switch to and confirm.
Transferring a call during a conference (exiting a conference) <> Transfer call a or Loudspeaker Profiset 70isdn, GB: A30853-X300-B501-3-7619 Calls involving two or more parties You must apply to your local network provider for this fea- ture. Inquire about the respective charges. Your telephone must be configured accordingly.
20.5.99 Answering machine Answering machine Profiset 70isdn, GB: A30853-X300-B501-3-7619 The Profiset 70isdn answering machine offers the follow- ing possibilities: Callers can leave messages on your answering ma- chine during your absence. Announcements request- ing that the caller leave a message can be recorded for this purpose.
A typical info announcement text is, e.g.: "You have dialed 1 2 3 4 5 6 7 . Please call back tomorrow." The Profiset 70isdn answering machine menu can be ac- AM menu tivated by pressing the The memory available is displayed when you press this key.
Page 88
5=settings? 6=switch AM? * only available if an- swering machine set- tings were pro- grammed. ** only available while processing recordings. Profiset 70isdn, GB: A30853-X300-B501-3-7619 The following functions are available in the menu: recordings? 1=back? 2=playback/pause? 3=forward? 4=clear? 5=stop? **...
Answ. machine on Recording an announcement AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 An announcement, an info announcement or a time con- trol must be activated before you can activate the answer- ing machine. If this is not the case, the dialog "Edit 1=text1?"...
20.5.99 Answering machine Recording an info announcement AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 Using the handsfree function: record your announcement after the tone. To end recording, press You can overwrite an announcement with a new recording at any time.
20.5.99 Recording a final announcement AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can also program an "AM active announ." key for recording info announcements ( 42). To record a final announcement, select one of the four memory slots (text 1 to text 4). A final announcement is not necessary for the answering machine to operate prop- erly.
Listening to announcements and info announcements AM menu Activating an announcement AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can listen to recorded announcements and info an- nouncements at any time. The announcement is played back via the loudspeaker. Activate the answering machine menu.
20.5.99 Checking recordings AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 > ? > 1=active announcement? 1=text1? 2=text2? 3=text3? 4=text4? When selecting MSN numbers, only the MSN numbers entered are offered ( The "AM menu" key LED flashes when new messages are received.
Page 94
Answering machine Fast playback Interrupting/resuming playback Stopping playback Deleting a recording Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can also program an "AM playback" key for playing back messages ( Prerequisite: you are in menu "2=recordings?" and listen- ing to a recording.
20.5.99 Checking the next/previous message Selecting a call Deleting all messages AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 Prerequisite: you are in menu "2=recordings?" and listen- ing to a recording. 1=back? If you press or confirm "1=back?" within 5 seconds when playing back a recording, the previous recording is played back.
Answering machine Monitoring during a recording AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 If the monitoring function is active, you can monitor the recording of a message via the loudspeaker. You have the option of taking the call by lifting the hand- set.
Recording calls AM menu Personal infos AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can record a call while telephoning. Inform the other party of your intention to record the call. You are conducting a call. Press "AM menu". The answering machine menu is acti- vated.
Answering machine Checking the status AM menu Details list AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 The following information can be checked in the "status" menu: Number of messages (old and new) Number of recordings (old and new) Number of infos (old and new)
AM menu VIP function AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can set sort criteria for playing back messages. You can switch between two types of sort criteria as follows: all new recordings are played back first followed by all old recordings, or all recordings are played back in the timed sequence.
20.5.99 Answering machine AM menu Time control AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 > ? > 7=VIP function? Enter and confirm the VIP password. The password is programmed. Activating/deactivating the VIP function Activate the answering machine menu. <> 5=settings? With password protection ( word.
Page 101
20.5.99 <> <> <> <> AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 With password protection ( word. > 1=active announcement? Select an MSN number for which you want to program a time control: 1 = MSN1, 2 = MSN2, 3 = MSN3.
AM menu <> Setting the voice quality AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 Select MSN number. Select the required time controls: 5 = time control 1, 6 = time control 2. You can see whether the time control is active or not on the upper display line.
20.5.99 Setting the message length AM menu Profiset 70isdn, GB: A30853-X300-B501-3-7619 <> 5=settings? With password protection ( word. > ? > 5=voice quality? The voice quality is switched. You can restrict the time allowed for recording messages. Activate the answering machine menu.
Initiating remote operation Checking messages and infos Deleting recordings Profiset 70isdn, GB: A30853-X300-B501-3-7619 You can operate your answering machine remotely from a normal telephone. To do this, the normal telephone must be set to DTMF signalling or you must have a hand-held transmitter.
Page 105
The answering machine can be activated from a normal telephone. Your call is answered after 90 s by Profiset 70isdn which issues the request "Please enter PIN". Call your number from a normal telephone. Wait for 90 s until the "Please enter PIN" request is is- sued.
CLIP COLP D channel Dial pulsing (DP) Profiset 70isdn, GB: A30853-X300-B501-3-7619 The ISDN glossary should help you understand the many new terms and abbreviations relating to ISDN. Port between the TAE socket and analog terminals. These devices are used to connect analog terminals, such as tele- phone, telefax, answering machine or modem, to the digital ISDN tel- ecommunications network.
Page 107
Premium rate access Primary rate access Profiset 70isdn, GB: A30853-X300-B501-3-7619 A signalling method whereby the information is transmitted to the switching centre in the form of tones with various frequencies. Uniform European ISDN standard introduced at the end of 1993, which will completely replace the national ISDN protocols in the year 2000.
Page 108
Three-party conference Terminal adapter Toggle Western plug Profiset 70isdn, GB: A30853-X300-B501-3-7619 A line used from the network termination in the multi-device connec- tion. Up to 12 connecting boxes and up to 8 ISDN terminals can be connected to an S bus;...
2 collective lockout for specific settings only specific functions are only displayed on your Profiset 70isdn if this is activated in the Configuration menu. can only be activated by entering digits The service menu allows you to access Profiset 70isdn settings.
Programming destination dialing Dialing with destination dialing Dialing from telephone directory: Programming call forwarding: Checking the answering machine: Profiset 70isdn, GB: A30853-X300-B501-3-7619 You hear the call signal: Lift the handset or press Loudspeaker Loudspeaker Lift the handset or press then dial the number (alternative: use the telephone directory or destination dialing key).
Page 112
Displaying the caller’s number ... 25 Disposal ... 3 Distinctive ringing ... 63 Do not disturb ... 49 Profiset 70isdn, GB: A30853-X300-B501-3-7619 Do not disturb (as function key) ...42 DSS number ...27 DTMF signalling ...62 DTMF signals off (as feature key) ... 42 DTMF/keypad number (as function key) ...42...
Page 113
... 56 Operating modes (answering machine) ... 75 Operating the answering machine remotely . 92 Operation of the telephone ... 12 Profiset 70isdn, GB: A30853-X300-B501-3-7619 Index Profiset 70isdn Park/resume (as function key) ... 42 Parking a call ...57 Password ...16...
Profiset 70isdn, GB: A30853-X300-B501-3-7619 Quick reference guide to remote AM operation The card on this page contains the basic instructions for operating the Profiset 70isdn answering machine from a different telephone. You can cut out the card. Profiset 70isdn First step Dial number.
Page 116
20.5.99 Quick reference guide to remote AM operation First step Messages/info Activate/deactivate AM Room monitoring Service number: 0180-5333222 Profiset 70isdn, GB: A30853-X300-B501-3-7619 Profiset 70isdn Dial number. Wait for announcement. Enter PIN. Playback Fast playback Back Forward End message Clear all Wait 90 sec.
Page 117
GB: A30853-X300-B501-3-7619 20.5.99 Loudspeaker Number redial Telephone directory Answering machine AM menu Shift...