Siemens Simatic PC Panel PC 870 Start-Up Instructions page 31

Release 11/02
Screen resolution and panel type selection
After the system settings have been updated, the following dialog appears in
which to select the screen resolution:
Figure 2–6
Select the screen resolution corresponding to your device and confirm the
selection with OK.
Then select the panel type for the device:
Figure 2–7
Select the panel type corresponding to your device.
The system settings of the operating system are then updated according to the
selections made. This finalizes the initial startup.
SIMATIC Panel PC 670/870 Start-Up Instructions
Connecting and Switching On the Panel PC 670/870
Selecting the screen resolution
Selecting the panel type
Step 15
2–9