Siemens ISI EN 50295 Brochure

Siemens as-interface brochure

Advertisement

AS-Interface
according to EN 50295
6/2
Introduction
6/2
Transmission technology
6/3
Configuration example
6/4
System components
6/5
Technical specifications
6/6
A/B technique
6/8
AS-Interface Safety at work
6/8
Introduction
6/9
AS-Interface safety monitors
6/11
AS-Interface safe compact modules
6/15
AS-Interface position switches
6/18
AS-Interface cable-operated switches
6/19
AS-Interface light curtains and
light arrays for Category 4
6/24
AS-Interface laser scanner LS4
6/30
AS-Interface EMERGENCY STOP
pushbuttons
6/30
Accessories
AS-Interface Master
6/31
Masters for SIMATIC S5
6/31
CP 2430
6/33
Masters for SIMATIC S7
6/33
CP 142-2
6/35
CP 243-2
6/37
CP 343-2
6/39
CP 343-2 P
)
1
Masters for SIMATIC C7
ST 70
)
2
AS-Interface network transitions
Sec. 8
DP/AS Interface Link 20E
DP/AS Interface Link 65
AS-Interface Slaves
6/41
I/O modules for operation in the field
6/41
Introduction
6/43
Digital I/O modules IP67 – K60
6/51
Digital I/O modules IP68 / IP69K – K60R
6/56
Digital I/O modules IP67 – K45
6/64
Digital I/O modules IP67 –
application modules
6/71
Analog I/O modules IP67 – K60
6/74
Pneumatic I/O modules
6/75
I/O modules for operation
in IP20 control cabinet
6/75
Introduction
6/77
SlimLine
6/88
F90 module
6/93
Flat module
6/94
Special integrated solutions
6/94
AS-Interface Communication modules
AS-Interface Slaves (continued)
6/98
Modules with special functions
6/98
Counter modules
6/100
Earth fault detection modules
6/103
Overvoltage protection module
6/105 AS-Interface motor starters and
IP65/67 load feeders
6/105
AS-Interface compact starters IP65
(400 V AC)
6/113
AS-Interface motor starters IP67 (24 V DC)
6/116
ECOFAST motor and soft starter
6/117 AS-Interface motor starters and
IP20 load feeders
6/117
Load feeder modules IP20
)
3
AS-Interface Direct/Reverse Starter
LV 10
6/121
SIRIUS soft starters
)
3
Communications capable contactors
LV 10
55 to 250 kW
)
3
Double relays and transformers
LV 10
6/122 SIGNUM pushbuttons and
indicator lights
6/122
AS-Interface F-Adapter for
EMERGENCY STOP command devices
6/123
AS-Interface enclosure
6/124
AS-Interface customized enclosures
and front panel modules
6/133
AS-Interface LED displays
6/134 AS-Interface for LOGO!
)
3
AS-Interface signal columns
LV 10
6/135 AS-Interface power supply units
6/135
Introduction
6/136
Power supply units IP20
6/141
Power supply units IP65
6/143 Transmission media
6/143
AS-Interface shaped cable
6/145 System components and accessories
6/145
Repeater/Extender
6/147
Addressing units
6/149
Diagnostic units
6/151
Miscellaneous accessories
6/152 Documentation
)
1
see Catalog ST 70
"Products for Totally Integrated
Automation and Micro Automation"
)
2
see Section 8
)
3
see Catalog LV 10
"Controlgear for Industry"
Siemens IK PI . 2004

Advertisement

Table of Contents
loading

Summary of Contents for Siemens ISI EN 50295

  • Page 1 6/145 Repeater/Extender 6/147 Addressing units 6/149 Diagnostic units 6/151 Miscellaneous accessories 6/152 Documentation see Catalog ST 70 ”Products for Totally Integrated Automation and Micro Automation“ see Section 8 see Catalog LV 10 ”Controlgear for Industry“ Siemens IK PI . 2004...
  • Page 2: Transmission Technology

    This concept gives you tremendous flexibility and considerably cuts costs. Siemens IK PI · 2004 An AS-Interface power supply unit, which meets the require- ments of the AS-Interface transmission technology, is used for this system. The AS-Interface shaped cable provides mechani- cal coding and thus prevents polarity reversal;...
  • Page 3 In addition, the simple installation and clear struc- turing of the wiring and special cable design not only consider- ably reduce the risk of faults but also reduce service and main- tenance costs. Siemens IK PI · 2004 Introduction...
  • Page 4: System Components

    SIMATIC S7, distributed I/Os ET 200 • AS-Interface shaped cables AS-Interface master for SIMATIC Siemens IK PI · 2004 • Network components such as repeaters/extenders • The power supply unit for supplying power to the slaves, modules for connecting standard sensors/actuators •...
  • Page 5 SIMATIC NET products (Order No. 6GK..., 6XV1...), which you will find on the Internet page listed below. Additional information is available in the Internet under: ) for data and http://www.siemens.de/simatic-net/ik-info AS-Interface Introduction Technical specifications Siemens IK PI · 2004...
  • Page 6 2.1 must also be used. The A/B technique is supported by the SIMATIC S7 masters and the DP/AS-Interface links from Siemens. To masters that do not support specification 2.1, only standard and A slaves can be connected.
  • Page 7 Order No. 6GK7 243-2AX01-0XA0 6GK7 343-2AH00-0XA0 6GK7 343-2AH10-0XA0 6GK1 415-2AA01 3RK2 200-0CQ20-0AA3 3RK2 200-0CT20-0AA3 3RK2 200-0CU20-0AA3 3RK2 200-0CQ22-0AA3 3RK2 100-1EQ20-0AA3 3RK2 400-1BQ20-0AA3 3RK2 400-1HQ00-0AA3 3RK2 200-0DQ00-0AA3 3RK2 400-1FQ03-0AA3 3RK2 200-0CE02-0AA2 3RK2 200-0CG02-0AA2 3RK2 400-1FE00-0AA2 3RK2 400-1FG00-0AA2 Siemens IK PI · 2004...
  • Page 8 • Safe and non-safe data on the same bus. • Existing systems can be expanded quickly and easily. • Safe signals can be combined in groups. Siemens IK PI · 2004 • Integration of the safety signals in the plant diagnostics con- cept.
  • Page 9 250 V, 2 A 115 V, 2A 230 V, 2A up to 24 V, 3 A 24 V, 1 A 115 V, 0.1 A 230 V, 0.05 A < 40 ms 0 to +60 -40 to +85 Siemens IK PI · 2004...
  • Page 10 • Two enabling circuits Configuration software Safety monitor Cable set ■ Dimensional drawings Safety monitor with one release circuit 6/10 Siemens IK PI · 2004 Order No. 3RK1 105-1AE04-0CA0 3RK1 105-1BE04-0CA0 3RK1105-1AE04-2CA0 3RK1105-1BE04-2CA0 3RK1 802-2FB06-0GA0 3RK1 901-5AA00 Safety monitor with two release circuits...
  • Page 11 2 standard outputs with U 3RK1 405-0BQ00-0AA3 SAP 4 26.5 to 31.5 Mechanical switching contact Contact open/closed ³ - / / peak Pin1 and 2 = Terminal/switching contact Pin3 and 4 Terminal/switching contact Pin5 = Not assigned Siemens IK PI · 2004 6/11...
  • Page 12 Number of I/O sockets Status indication • I/O display • U • AS-Interface/diagnostics display Connection Addressing 6/12 Siemens IK PI · 2004 Electronics Max. 0.18 3 = "–" 4 = Output 5 = Earth connection Built-in None Built-in Not assigned (closed)
  • Page 13 Dimensional drawings K60F safe module K45F safe module AS-Interface AS-Interface Safety at work AS-Interface safe compact modules Order No. 3RK1 205-0BQ00-0AA3 3RK1 901-2EA00 3RK1 405-0BQ00-0AA3 3RK1 405-1BQ00-0AA3 3RK1 901-0CA00 3RK1 901-1AA00 3RK1 901-1AA01 3RK1 901-1KA01 Siemens IK PI · 2004 6/13...
  • Page 14 Pin 3 of Socket 1 is connected to Pin 1 of Socket 2 and Pin 4 of Socket 1 is connected to Pin 2 of Socket 2. If both socket pairs are assigned, the inputs are linked. 6/14 Siemens IK PI · 2004 K60F Safe Compact Module ² Socket...
  • Page 15 EN 50 047, 31 mm wide, snap action contact, one NC AS-Interface AS-Interface Safety at work AS-Interface position switches Order No. 3SF3 200-6CV00-0BA1 3SF3 200-6DV00-0BA1 3SF3 200-6EV00-0BA1 3SF3 200-6FV00-0BA1 3SF3 200-6GV00-0BA1 3SF3 200-1CV00-0BA1 3SF3 200-1DV00-0BA1 3SF3 200-1EV00-0BA1 3SF3 200-1FV00-0BA1 3SF3 200-1GV00-0BA1 Siemens IK PI · 2004 6/15...
  • Page 16 - Angular roller lever - Swivel lever 6/16 Siemens IK PI · 2004 enclosure, EN 50 041, 40 mm wide, slow-action contact, two NC enclosure, EN 50 041, 40 mm wide, snap action contact, one NC EN 50 047, 50 mm wide, slow-action contact, 1 NC...
  • Page 17 3SF3 257-6XX40-0BA2 3SF3 257-6XX30-0BA2 3SX3 218 3SX3 228 3SF3 760-6XX00-0BA1 3SF3 750-6XX00-0BA1 3SX3 252 3SX3 253 3SX3 254 3SF3 860-6XX00-0BA1 3SF3 850-6XX00-0BA1 3SF3 840-6XX00-0BA1 3SF3 830-6XX00-0BA1 3SX3 197 3SX3 207 3SX3 206 3SX3 203 Siemens IK PI · 2004 6/17...
  • Page 18: As-Interface Cable-Operated Switches

    1) Accessories, technical specifications, contact travel, circuit diagrams and dimensional drawings are given for the specified basic switch in Catalog LV 10 Section AS-Interface Safety Systems 6/18 Siemens IK PI · 2004 ■ Application SIGUARD cable-operated switches are used for monitoring or for EMERGENCY-STOP facilities on particulary endangered sys- tem sections.
  • Page 19 • EN 61 496-1, -2, IEC 61 496-1, -2 (requirements for non-contact protection systems) • EN 999 (incl. calculation of safety clearances) • EN 954-1 (safety of machines, safety-related parts of controls). Siemens IK PI · 2004 for Category 4 6/19...
  • Page 20 1) From interruption of the protective zone to the cut-out command on AS-Interface 6/20 Siemens IK PI · 2004 Type 4 according to IEC 61496-1, -2 or EN 61496-1 (self-monitoring) 150 to 1800 (for series with 14 and 30 mm resolution)
  • Page 21 3SF7 842-6DJ01 Transmitter 3SF7 842-6DK00 Receiver 3SF7 842-6DK01 Transmitter 3SF7 842-6DL00 Receiver 3SF7 842-6DL01 Transmitter 3SF7 842-6DM00 Receiver 3SF7 842-6DM01 Transmitter 3SF7 842-6DN00 Receiver 3SF7 842-6DN01 Transmitter 3SF7 842-6DP00 Receiver 3SF7 842-6DP01 Siemens IK PI · 2004 for Category 4 6/21...
  • Page 22 1200 1350 1350 1500 1500 1650 1650 1800 1800 2100 2100 2400 2400 2700 2700 3000 3000 6/22 Siemens IK PI · 2004 Function Transmitter Receiver Transmitter Receiver Transmitter Receiver Transmitter Receiver Transmitter Receiver Transmitter Receiver Transmitter Receiver Transmitter Receiver...
  • Page 23 3SF7 842-6SE01 Transmitter 3SF7 842-6PG00 Receiver 3SF7 842-6PG01 Transmitter 3SF7 842-6MH00 Receiver 3SF7 842-6MH01 Transmitter 3SF7 842-6SE50 Receiver 3SF7 842-6SE51 Transmitter 3SF7 842-6PG50 Receiver 3SF7 842-6PG51 Transmitter 3SF7 842-6MH50 Receiver 3SF7 842-6MH51 Siemens IK PI · 2004 for Category 4 6/23...
  • Page 24 AS-Interface laser scanner LS4 ■ Overview 6/24 Siemens IK PI · 2004 The LS4 Laser Scanner is an optical distance sensor. The device periodically transmits light pulses within an operating range of 190°. If the pulses hit an obstruction or a person, the light is reflected and then received and evaluated by the LS4 laser scanner.
  • Page 25 • All types of hazardous area protection, • Room protection and access protection, • Projecting object monitoring (protection of machines and persons) • Non-safety-related measurement or recognition tasks (e. g. distance, position or contour recognition) Siemens IK PI · 2004 6/25...
  • Page 26 The operating range of the scanner (190°) is subdivided into angle segments of 0.36°. 6/26 Siemens IK PI · 2004 Protection and warning field pairs The device has 4 switchable protection and warning field pairs. LS4Soft operating software The SIGUARD LS4 laser scanner must be parameterised using the associated LS4Soft software.
  • Page 27 Infrared laser diode ( = 905 nm) 48,75 Cast aluminum, plastic Plastic, steel connection plate 10 to 150 Hz, max. 5 g 10 g, 16 ms Brushless DC motor Maintenance-free ball bearings Siemens IK PI · 2004 6/27...
  • Page 28 Assignment of the diagnostic parameter bits Assignment of SF coding ■ Selection and Ordering data Accessories 6/28 Siemens IK PI · 2004 3SF7 834-6DD00 LS4-4 AS-Interface laser scanner Assignment • X1 (M12 plug for device connection) 0 (four data bits as outputs) •...
  • Page 29 ■ Dimensional drawings LS4 laser scanner Assembly system AS-Interface AS-Interface Safety at work AS-Interface laser scanner LS4 ■ Schematics Siemens IK PI · 2004 6/29...
  • Page 30 • English 1) See Catalog LV 10, Section Pushbuttons and Indicator Lamps 6/30 Siemens IK PI · 2004 It is also possible now to connect EMERGENCY STOP devices via the standard AS-Interface with safety-oriented communica- tion. This only applies to EMERGENCY STOP devices of the SIGNUM 3SB3 command devices for front panel installation and for installation in an enclosure.
  • Page 31 • I/O and page mode: Access to slave data in the I/O address space and master calls through page access • Page mode: Access to slave data and master calls through page access Siemens IK PI · 2004 CP 2430 6/31...
  • Page 32 • Relative humidity max. Design • Module format • Dimensions (W x H x D) in mm • Weight • Space required 6/32 Siemens IK PI · 2004 ■ Ordering data 5 ms with 31 slaves CP 2430 communications processor V 2.0...
  • Page 33 Calls are described in the manual. The manual also contains program examples. System configuration Parameter assignment The CP 142-2 is parameterized with STEP of V2.1. Separate configuration for AS-Interface is not necessary. Siemens IK PI · 2004 CP 142-2 ® 7 basic package as 6/33...
  • Page 34 • Module format • Dimensions (W x H x D) in mm • Weight • Space required Degree of protection 6/34 Siemens IK PI · 2004 ■ Ordering data 5 ms with 31 slaves CP 142-2 communications processor For connecting SIMATIC ET 200X...
  • Page 35 S7-200 or enables master calls (e.g. readdressing of slaves). All connected AS-Interface slaves are configured at the press of a button. No further configuration of the CP is necessary. Siemens IK PI · 2004 CP 243-2 6/35...
  • Page 36 • Relative humidity Design • Module format • Dimensions (W x H x D) in mm • Weight • Space required 6/36 Siemens IK PI · 2004 ■ Ordering data V 2.1 CP 243-2 communications processor For connection of SIMATIC S7-200...
  • Page 37 A and B slaves are slaves in accordance with the extended AS-Interface specification V2.1. For the AS-Interface master calls (e.g. Write parameter, read diagnostic values), a Function Call (FC) is provided on the diskette that accompanies the manual. Siemens IK PI · 2004 CP 343-2 6/37...
  • Page 38 • Relative humidity, max. Design • Module format • Dimensions (W x H x D) in mm • Weight • Space required 6/38 Siemens IK PI · 2004 ■ Ordering data V 2.1 CP 343-2 communications processor 5 ms for 31 slaves...
  • Page 39 31 analog slaves at the AS-Interface. Access to analog values is easy thanks to the integrated analog value processing. The CP 343-2 P enables the AS-Interface configuration to be read out with STEP 7 V5.2 and higher. Siemens IK PI · 2004 CP 343-2 P 6/39...
  • Page 40 • Module format • Dimensions (W x H x D) in mm • Weight • Space required Configuration software 6/40 Siemens IK PI · 2004 ■ Ordering data V 2.1 CP 343-2 P communications processor 5 ms for 31 slaves...
  • Page 41 3RK1 400-1MQ00-0AA3 3RK1 200-0CQ00-0AA3 3RK1 400-1DQ02-0AA3 3RK1100-1CQ00-0AA3 3RK1 200-0CQ20-0AA3 M8-Screw 3RK1 200-0CT20-0AA3 M8-Snap 3RK1 200-0CU20-0AA3 3RK2 200-0CQ20-0AA3 M8-Screw 3RK2 200-0CT20-0AA3 M8-Snap 3RK2 200-0CU20-0AA3 3RK2 200-0CQ22-0AA3 3RK1 400-1BQ20-0AA3 3RK1 400-0GQ20-0AA3 3RK1 100-1CQ20-0AA3 3RK2 100-1EQ20-0AA3 3RK2 400-1BQ20-0AA3 Siemens IK PI · 2004 6/41...
  • Page 42 LED diagnostic indication of the K60 compact module LED diagnostic indication of the K45 compact module 6/42 Siemens IK PI · 2004 Compact modules of Series K60 have three LEDs for diagnostic indication. Compact modules of Series K45 have one single and one dual...
  • Page 43 In this case, additional seals (straight and shaped) must be inserted in the mounting plate. The seals are not included in the scope of supply and must be ordered separately (3RK1 902-0AR00, see Selection and Ordering data). Siemens IK PI · 2004 6/43...
  • Page 44 • Socket 5 • Socket 6 • Socket 7 • Socket 8 Number of I/O sockets Note 6/44 Siemens IK PI · 2004 26.5 to 31.6 Degree of protection Ground connection Short-circuit and overload Ambient temperature in °C withstand capability Storage temperature in °C...
  • Page 45 PIN 4 = Data input I PIN 5 = Earth connection PIN 5 = Earth connection 3 = "-" 3 = "-" 2/4 = Output 2/4 = Output 5 = Ground connection 5 = Ground connection Siemens IK PI · 2004 6/45...
  • Page 46 • Socket 4 • Socket 5 • Socket 6 • Socket 7 • Socket 8 Number of I/O sockets 6/46 Siemens IK PI · 2004 4 inputs/4 outputs 4 inputs/ 3 outputs Standard slaves A/B slaves Standard assignment Y-II assignment 3RK1 400–1DQ03–0AA3...
  • Page 47 These seals are not included in the scope of supply and must be ordered separately (3RK1 902-0AR00). If both cables are routed into and out of the module, additional seals are not required. Siemens IK PI · 2004 6/47...
  • Page 48 Sealing kit For K60 mounting plate and distributor Cannot be used for K45 mounting plate (one set contains five straight and five shaped seals) 3RK1 902-0AR00 6/48 Siemens IK PI · 2004 Current loading Slave type capacity of outputs assignments special –...
  • Page 49 Mounting plate for rail mounting 3RK1 901-0CB00 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules IP67 - K60 ■ Schematics Terminal assignment, input, pnp (M12 socket) Standard assignment Y assignment Y-II assignment Siemens IK PI · 2004 6/49...
  • Page 50 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules IP67 - K60 ■ Schematics (continued) Terminal assignment, output, pnp (M12 socket) Standard assignment Y-II assignment Y assignment 6/50 Siemens IK PI · 2004...
  • Page 51 3RK1 904-2AB00. Following mounting, the module is connected to the addressing unit using the addressing line, and then addressed. The addressing line is subsequently removed, and the module connected to the bus cable. Siemens IK PI · 2004 6/51...
  • Page 52 T-distributor (3RK1901-1TR00) in degree of protection IP68. 6/52 Siemens IK PI · 2004 The following conditions must be observed: lines for the AS-Interface are applicable. The maximum permis- sible current is limited to 4 A for all M12 connection cables.
  • Page 53 To supply the output circuit, an external supplementary supply (AUX POWER) of 20 to 30 V DC is necessary. The supplementary supply must comply with VDE 0106 (PELV), safety class III. Siemens IK PI · 2004 6/53...
  • Page 54 3RK1 904-2AB01, the addressing is carried out with a standard M12 cable 3RX1 642) 3RK1 901-3RA00 6/54 Siemens IK PI · 2004 IP67 round cable distributor AS-i / U Ribbon cable for...
  • Page 55 I/O modules for operation in the field Digital I/O modules IP68 / IP69K - K60R Mounting plate for mounting onto standard rail Fem. Male cable cable plug plug Cover ring M12x1 Wiring diagram 4-pole 1 2 3 4 M12-T hub Siemens IK PI · 2004 6/55...
  • Page 56 They can be inserted in any direction. 6/56 Siemens IK PI · 2004 • The first mounting plate has the same hole pattern as the K60 compact module. This means that K60 compact modules can be mounted flush in combination with K45 modules.
  • Page 57 Addressing The addresses are assigned using an integrated addressing socket. M12 sockets that are not required must be sealed with 3RK1 901-1KA00 blank plugs in order to guarantee the speci- fied degree of protection. Siemens IK PI · 2004 6/57...
  • Page 58 Assignment of data bits • Socket 1 • Socket 2 • Socket 3 • Socket 4 Number of I/O sockets 6/58 Siemens IK PI · 2004 26.5 to 31.6 Approvals Built-in Degree of protection Ground connection Short-circuit and overload with-...
  • Page 59 PIN3 = Sensor supply L PIN4 = Data input PIN5 = Earth connection PIN4 = OUT1(D0) PIN4/2 = IN3(D2) PIN4 = OUT2(D1) PIN4/2 = IN4(D3) PIN4 = OUT3(D2) PIN4 = OUT1(D0) Not available PIN4 = OUT2(D1) Siemens IK PI · 2004 6/59...
  • Page 60 ■ Technical specifications (continued) Ambient temperature in °C Degree of protection Connection technique Mounting Note 6/60 Siemens IK PI · 2004 K45 mounting plate For wall mounting For standard rail mounting 3RK1 901-2EA00 3RK1 901-2DA00 -40 to +85 -40 to +85...
  • Page 61 3RK1 200-0CU20-0AA3 3RK2 200-0CQ20-0AA3 3RK2 200-0CT20-0AA3 3RK2 200-0CU20-0AA3 3RK2 200-0CQ22-0AA3 3RK1 400-1BQ20-0AA3 3RK1 400-0GQ20-0AA3 3RK1 100-1CQ20-0AA3 3RK2 100-1EQ20-0AA3 3RK2 400-1BQ20-0AA3 3RK1 901-2EA00 3RK1 901-2DA00 3RK1 901-1NN00 3RK1 901-1KA00 3RK1 901-1PN00 3RK1 901-1MN00 3RK1 902-0AR00 Siemens IK PI · 2004 6/61...
  • Page 62 3RK1 901-2EA00 Drilled holes and mounting possibilities as for the K60 compact module Distributor 3RK1 901-1NN00 6/62 Siemens IK PI · 2004 Mounting plate for standard rail mounting 3RK1 901-2DA00 Drilled holes and mounting possibilities as for the application module...
  • Page 63 Terminal assignment input, pnp (M12 socket) Y assignment AS-Interface Slaves I/O modules for operation in the field Digital I/O modules IP67 - K45 Terminal assignment output, pnp (M12 socket) 24 V DC Standard assignment Siemens IK PI · 2004 6/63...
  • Page 64 When using the K45 module instead of coupling modules 3RG9 010-0AA00 and 3RG9 030-0AA00, the K45 mounting plates 3RK1 901-2EA00 (wall mounting) or 3RK1 901-2DA00 (mounting onto standard rails) are required. 6/64 Siemens IK PI · 2004 Advantages of the K45 compact modules The K45 compact modules offer further advantages over the functionality of the application modules: •...
  • Page 65 PIN2 = IN4 (D3) PIN4 = IN4(D3) Input (D2 and D3) Red/yellow/green LED Green LED "AS-i" LED: Not available green = OK red = no data communication flashing red/yellow = null address flashing red = overload sensor Siemens IK PI · 2004 6/65...
  • Page 66 Number of I/O sockets I/O display AS-Interface display AS-Interface/diagnostics display Connection Note 1 Note 2 6/66 Siemens IK PI · 2004 2 inputs/2 outputs Relay PNP transistor 3RG9 001–0AC00 3RG9 001–0CC00 Standard slaves 26.5 to 31.6 Short-circuit and overload proof...
  • Page 67 20 to 30 DC 1 = AS-i ”+“3 = AS-i ”–“ 4 x M12 socket for connecting AS- Interface (Sensors/actuators) IP67 –25 to +85 –40 to +85 Via contact pin on the FK or Pg coupling module Siemens IK PI · 2004 6/67...
  • Page 68 Storage temperature in °C Number of I/O sockets Display of outputs AS-Interface display Diagnostics Connection Note 1 Note 2 6/68 Siemens IK PI · 2004 4 outputs Relay PNP transistor 3RG9 001–0AB00 39 001–0AL00 Standard slaves 26.5 to 31.6 Relay Electronics 1 (DC 12) 0.5 (DC 13 24...
  • Page 69 Via screw terminals to AS-Interface cable and U male contact connection to top section of module Version with high-grade steel components and Viton seals 3RK1 901–1JA00 ´ coupling module ´ shaped seal (Viton) ´ terminating seal (Viton) High-grade steel threaded bushings Siemens IK PI · 2004 6/69...
  • Page 70 3RK1 400-1BQ01-0AA3 3RK1 100-1CQ01-0AA3 3RG9 001-0AB00 3RG9 001-0AC00 3RG9 001-0AL00 3RG9 001-0AM00 3RG9 001-0AH00 3RG9 001-0AJ00 6/70 Siemens IK PI · 2004 Coupling modules FK coupling module 3RG9 010-0AA00 PG coupling module 3RG9 220-0AA00 FK-E coupling module 3RG9 030-0AA00 3RG9 901-1NA00...
  • Page 71 Ambient temperature in °C -20 to +60 Storage temperature in °C -40 to +85 AUX PWR display (U Green LED AS-i display Green LED FAULT display Red LED Connection Mounting plate for K60 compact module Siemens IK PI · 2004 6/71...
  • Page 72 3RK1 902-0AR00 Additional information is available in the Internet under: http://mall.ad.siemens.com The analog modules to the profile 7.1/7.2 can be ordered at this address. 6/72 Siemens IK PI · 2004 Type Measurement /output range 2 inputs 4 to 20 mA or ±...
  • Page 73 All Pin assignments without external supply of the sensors. Pin assignment output module 3RK1 107-1BQ40-0AA3 Current output 3RK1 107-2BQ40-0AA3 Voltage output All Pin assignments without external supply of the sensors. AS-Interface Slaves Analog I/O modules IP67 - K60 Siemens IK PI · 2004 6/73...
  • Page 74: Pneumatic I/O Modules

    I/O modules for operation in the field Pneumatic I/O modules ■ Overview All pneumatic I/O modules must now be ordered directly from the manufacturer (Fa. Kuhnke). An order via Siemens is no longer possible. Order informationen of Kuhnke GmbH Module groupe Pneumatic compact module K60...
  • Page 75 DIN EN 50 022 • • • – AS-Interface Slaves Introduction Wall mounting using Other push-in lugs possibilities (Order No.: 3RP1 903) • – • – – – – Integrated tags for screw fixing Siemens IK PI · 2004 6/75...
  • Page 76 LED to indicate the status of the AS-In- terface voltage. Flat module and F90 module (4I/4O) The flat module and F90 module with four inputs and four out- puts have a dual LED for diagnostics functions. 6/76 Siemens IK PI · 2004...
  • Page 77 Removable terminals The removable terminal is the innovative connection technique from Siemens for AS-Interface SlimLine modules of the S22.5 and S45 Series. The complete terminal block can be quickly and easily dismantled and reassembled. It is not necessary to dis- connect the terminals during this process.
  • Page 78 Degree of protection Ambient temperature in °C Storage temperature in °C 6/78 Siemens IK PI · 2004 Locking removable terminals Push terminal backwards until latch snaps into place Customer benefits • Quick replacement of the basic unit minimizes service costs and reduces downtimes •...
  • Page 79 Finely stranded with end sleeve: ´ (0.25–1) Finely stranded without end sleeve: ´ (0.25–1.5) AWG conductor connections solid ´ ´ (24–16) or stranded: AWG 2 (24–16) Disassembly tool for spring- loaded terminal connection: See "Accessories" Siemens IK PI · 2004 6/79...
  • Page 80 • Data bit D0 • Data bit D1 • Data bit D2 • Data bit D3 Connection Conductor cross-sections in mm Note 6/80 Siemens IK PI · 2004 2 inputs/2 outputs 2 inputs/2 outputs Screw-type connection Screw-type connection Standard slave Standard slave 2-wire...
  • Page 81 (0.25–1.5) Finely stranded with end sleeve: ´ (0.25–1) Finely stranded without end sleeve: ´ (0.25–1.5) AWG conductor connections solid ´ or stranded: AWG 2 (24–16) Disassembly tool for spring- loaded terminal connection: See "Accessories" Siemens IK PI · 2004 6/81...
  • Page 82 • Data bit D0 • Data bit D1 • Data bit D2 • Data bit D3 Connection Note 6/82 Siemens IK PI · 2004 4 inputs/4 outputs 4 inputs/4 outputs Screw-type connection Screw-type connection Standard slave Standard slave 2- and 3-wire...
  • Page 83 Finely stranded with end sleeve: ´ (0.25–1) Finely stranded without end sleeve: ´ (0.25–1.5) AWG conductor connections solid ´ ´ (24–16) or stranded: AWG 2 (24–16) Disassembly tool for spring- loaded terminal connection: See "Accessories" Siemens IK PI · 2004 6/83...
  • Page 84 • Data bit D2 • Data bit D3 Connection Conductor cross-sections in mm Note 1 Note 2 6/84 Siemens IK PI · 2004 4 inputs/4 outputs Spring-loaded connection Standard slave 2- and 3-wire PNP transistor (1 A) 3RK1 402-3CG01-0AA2 Short-circuit and overload withstand capability...
  • Page 85 ´ Finely stranded with end sleeve: 2 (0.25–1) ´ Finely stranded without end sleeve: 2 (0.25–1.5) AWG conductor connections solid or stranded: ´ AWG 2 (24–16) Disassembly tool for spring-loaded terminal connection: See "Accessories" Siemens IK PI · 2004 6/85...
  • Page 86 For protection against unauthorized addressing Plug-in lugs For screw mounting SlimLine opening tool For all units with Cage Clamp terminals up to max. 1.5 mm partly insulated 6/86 Siemens IK PI · 2004 Connection Slave Inputs Outputs terminals type Screw-type...
  • Page 87 107.6 Screw-type terminal SlimLine S45 I/O modules for operation in IP20 control cabinet ■ Schematics Typical circuit diagram for SlimLine S22.5 3RK1 200-0CE00-0AA2 3RK1 200-0CE02-0AA2 Typical circuit diagram for SlimLine S45 AS-Interface Slaves SlimLine Siemens IK PI · 2004 6/87...
  • Page 88 Formula for the cycle time: 4 · ((6 · 5 ms) + 5 ms + 10 ms) =180 ms 6/88 Siemens IK PI · 2004 Note 1: The following function blocks (FBs) are available for sequence control: • FB 21 (E16-2433) for the AS-Interface master CP2433 (S5-95 U) •...
  • Page 89 The supplementary supply must comply with VDE 0106 (PELV), safety class III. I/O modules for operation in IP20 control cabinet 3RG9 002-0DA00 ³ AS-Interface Slaves Module F90 Combicon connection 3RG9 004-0DB00 3RG9 004-0DA00 Built-in via Combicon male connector Via Combicon pin connector Siemens IK PI · 2004 6/89...
  • Page 90 Displays • Inputs/outputs • AS-i voltage Connection Addressing Note 1 Note 2 6/90 Siemens IK PI · 2004 4 inputs/4 outputs 2 A, floating screw-type terminals 3RG9 002-0DC00 Standard slaves 26.5 to 31.6 Short-circuit and overload proof 20 to 30 2- and 3-wire system ³...
  • Page 91 The supplementary supply must comply with VDE 0106 (PELV), safety class III. I/O modules for operation in IP20 control cabinet Combicon connection 3RG9 004-0DE00 ³ 3 mA Via Combicon pin connector AS-Interface Slaves Module F90 Siemens IK PI · 2004 6/91...
  • Page 92 • 4 x 5-pin connector for connecting • Standard sensors/actuators • 2 x 4-pin connector for AS-Interface and external auxiliary voltage ■ Dimensional drawings 6/92 Siemens IK PI · 2004 Connection Inputs Outputs Screw-type terminals 2- and 3-wire PNP transistor...
  • Page 93: Flat Module

    200 mA for all I/Os screw-type terminals 3RK1 400-0CE00-0AA3 Built-in IN1/OUT1 IN2/OUT2 IN3/OUT3 IN4/OUT4 IP20 -25 to +70 -40 to +85 Green LED / red LED Via screw terminal Via an integrated addressing socket Order No. 3RK1 400-0CE00-0AA3 Siemens IK PI · 2004 6/93...
  • Page 94 200 mA). If the switching outputs are overloaded, the module will not respond to master calls. 6/94 Siemens IK PI · 2004 AS-Interface communication module for circuit-board mounting 3RG9 005-0SA00 The 4I/4O module for PCB mounting can be used to scan up to...
  • Page 95 If the inputs are loaded with more than 200 mA, the module will not respond to master calls. Connection pad 27, 29 28, 30 17, 18, 23, 24 13, 14, 19, 20 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 25, 26 Siemens IK PI · 2004 6/95...
  • Page 96 Degree of protection Ambient temperature in °C Storage temperature in °C Display LED status displays 6/96 Siemens IK PI · 2004 4 inputs / 4 outputs I/O supply via AS- I/O supply via external auxiliary voltage Interface cable (24 V PELV) (max.
  • Page 97 AMP 1-0100317-5 (30-pole) 3RK1 400-1CD00-0AA2 3RK1 200-0CD00-0AA2 Pad numbering rear side: 29, 27, 25, to , 5, 3, 1 Pad numbering rear side: 30, 28, 26, to , 6, 4, 2 Siemens IK PI · 2004 6/97...
  • Page 98 The counter is only active for the reset parameter P2 (default). By setting P2, the counter is erased, but incoming pulses are only registered when P2 has been reset. Note: A customer-specific function block is required or must be programmed. 6/98 Siemens IK PI · 2004 Typical connections ³...
  • Page 99 AS-Interface Slaves Modules with special functions Counter modules With Cage Clamp terminal connection 3RK1 200-0CG03-0AA2 Cage Clamp terminals ´ (0.25–1.5) ´ (0.25–1) ´ (0.25–1.5) ´ AWG 2 (24–16) Order No. 3RK1 200-0CE03-0AA2 3RK1 200-0CG03-0AA2 Siemens IK PI · 2004 6/99...
  • Page 100 In each case, only one module is necessary for each AS-Inter- face network. Typical connections 6/100 Siemens IK PI · 2004 ■ Function The earth fault is detected by the module, indicated via a LED and signaled via two signaling outputs (1 = no earth fault /OK;...
  • Page 101 AS-i AS-i ´ 22.5 AS-Interface Slaves Modules with special functions Earth fault detection modules With Cage Clamp terminal connection 3RK1 408-8KG00-0AA2 Spring-loaded terminal connection ´ (0.25–1.5) ´ (0.25–1) ´ (0.25–1.5) ´ AWG 2 (24–16) Siemens IK PI · 2004 6/101...
  • Page 102 Earth fault detection module • with screw terminals • with Cage Clamp terminals 3RK1 408-8KE00-0AA2 ■ Dimensional drawings NSB0_01412 Standard terminal Removeable terminal Spring-type terminal 84.3 107.6 Screw-type terminal 6/102 Siemens IK PI · 2004 Order No. 3RK1 408-8KE00-0AA2 3RK1 408-8KG00-0AA2...
  • Page 103 Device without earth connection Application ® Earthing of the mounting plate Mounting plate Device with earth connection OVP = Overvoltage protection protected, their mounting brackets must also be connected into the grounding points. Overvoltage protection module NSA0_00093 Siemens IK PI · 2004 6/103...
  • Page 104 • Ambient temperature in °C • Storage temperature in °C ■ Selection and Ordering data 3RK1 901-1GA00 ■ Dimensional drawings 6/104 Siemens IK PI · 2004 Overvoltage protection module 3RK1 901-1GA00 for AS-i IP67 ´ ´ -25 to +85 -40 to +85...
  • Page 105 The compact starter and the mounting plate must be or- dered separately. The power for the main circuit is fed in via a power connector to be ordered separately (see Accessories un- der Selection and Ordering data). Siemens IK PI · 2004 6/105...
  • Page 106 Under normal operation, the LEDs on the compact starters indi- cate the following device states: 6/106 Siemens IK PI · 2004 Addressing The addressing of the AS-Interface compact starter can still be used even if it is fully wired, because the module is disconnected from the AS-Interface network as soon as the addressing con- nector is inserted.
  • Page 107 • Output driver defective (contactor must be tested). • Simultaneous activation of clockwise and counterclockwise rotation (user programme must be checked). – – – – – – – Meaning – – – – – – – – Siemens IK PI · 2004 6/107...
  • Page 108 “Run reserve” “Special command 1” “Special command 2” 6/108 Siemens IK PI · 2004 Note: The brake contact is controlled via the bus separately from the main circuit. This makes it possible to switch the motor and brake independently. In the user programme, it must be ensured that dangerous plant states cannot occur, e.g.
  • Page 109 ), AWG (15); 15 A (1.5 mm 50 (to type of co-ordination "1") See service-life characteristics for 3RT10 contac- tors AS-Interface Slaves EDS/ERS 2.2 kW 600 1/h ), AWG (13) ), AWG (13) ³ 10 million operating cycles Siemens IK PI · 2004 6/109...
  • Page 110 Version with brake contact for 400 V AC/0.5 A infeed for brake rectifier Version with brake contact for DC-side switching of the bakes with 500 V DC/0.2 A 6/110 Siemens IK PI · 2004 Order No. 3RK1 322- @@ S12-0AA @ 3RK1 322- @@ S12-1AA @...
  • Page 111 3RK1 902-0CB00 3RK1 902-0CC00 3RK1 902-0CD00 3RK1 902-0CE00 3RK1 902-0CK00 3RK1 902-0CJ00 3RK1 902-0CH00 3RK1 902-0CG00 3RK1 902-0CM00 3RK1 902-0CP00 3RK1 902-0CQ00 3RK1 902-0CN00 3RK1 902-0CR00 3RK1 902-0CS00 3RK1 902-0AH00 3RK1 902-0CT00 3RK1 902-0AJ00 Siemens IK PI · 2004 6/111...
  • Page 112 0.5 m connecting cable and plug 3RK1 902-0AM00 ■ Dimensional drawings 3RK1 322-..S.-.AA. Æ Æ 3RK1 902-0AP00 6/112 Siemens IK PI · 2004 Order No. 3RK1 702-2GB10-2AA0 3RK1 702-2HB10-2AA0 3RK1 902-0AP00 3RK1 902-0AR00 3RK1 902-0AM00 ■ Schematics Connector pin assignment digital inputs (Y assignment)
  • Page 113 (Key 1) for local operation is only permitted to be used during "CPU Stop" in the higher-level PLC. starters: If an input with ® output 1) is switched off starters: If an input with the Quick output 1) is switched off within the de- Siemens IK PI · 2004 6/113...
  • Page 114 Degree of protection Earth connection Ambient temperature in °C Storage temperature in °C Number of I/O sockets Note 6/114 Siemens IK PI · 2004 Single direct on-line starter Double direct on-line starter 4 inputs 4 inputs 1 output 2 outputs...
  • Page 115 1) Modules supplied without mounting plate. ■ Dimensional drawings 3RK1 400-1NQ01-0AA4 3RK1 400-1MQ01-0AA4 AS-Interface Slaves AS-Interface motor starters and IP65/67 load feeders AS-Interface motor starters IP67 (24 V DC) 3RK1 400-1MQ03-0AA4 Order No. 3RK1 400-1NQ01-0AA4 3RK1 400-1MQ01-0AA4 3RK1 400-1MQ03-0AA4 Siemens IK PI · 2004 6/115...
  • Page 116: Ecofast Motor And Soft Starter

    PROFIBUS AS-Interface Mechanical 6/116 Siemens IK PI · 2004 conditions of the machine or installation are taken into account. Distributed motor starters are available for PROFIBUS DP and AS-Interface. The starters can be installed in the vicinity of the motor or mounted onto the motor.
  • Page 117 The following states are displayed: • 24 V DC auxiliary voltage present or output/outputs set (230 V AC version) • AS-Interface communication o.k. • AS-Interface communication fault • Station address = 0 (module not addressed) Siemens IK PI · 2004 6/117...
  • Page 118 Addressing The technical specifications for the load feeders is the same as that specified for the individual devices. The high short-circuit strength of I 6/118 Siemens IK PI · 2004 Load feeders modules IP20 2I/1O 4I/2O 3RK1 400-1KG01-0AA1 3RK1 400-1MG01-0AA1 26.5 to 31.6 (in accordance with AS-Interface specification)
  • Page 119 Order No. 3RK1 400-1KG01-0AA1 3RK1 400-1MG01-0AA1 3RK1 402-3KG02-0AA1 3RK1 402-3LG02-0AA1 3RK1 701-2GB00-0AA0 3RK1 701-2HB00-0AA0 3RK1 901-3AA00 3RK1 901-3BA00 3RK1 901-3CA00 3RK1 901-3DA00 3RK1 901-3EA00 3RK1 901-3FA00 3RK1 901-3GA00 3RK1 901-0EA00 3RK1 901-0NA00 3RK1 901-0PA00 Siemens IK PI · 2004 6/119...
  • Page 120 AS-Interface load feeder module with 4 inputs and 2 outputs as dual direct on-line starter 6/120 Siemens IK PI · 2004 AS-Interface load feeder module with 4 inputs and 2 outputs or 3 inputs and 2 outputs as reversing starter...
  • Page 121: Sirius Soft Starters

    • Reduction of mechanical loading throughout the drive • Reduction of the loading on the power supply system at 400 V SIRIUS soft starters Order No. 3RW3 014-1CB@4 3RW3 016-1CB@4 3RK1 400-1KG01-0AA1 3RK1 402-3KG02-0AA1 Siemens IK PI · 2004 6/121...
  • Page 122 For further details on the EMERGENCY-STOP actuator, see the Section Pushbutton Units and Indicator Lights in Catalog NS K, 10/2001 Edition or Catalog LV 10, 2004 Edition. 6/122 Siemens IK PI · 2004 ■ Design The F adapter has a safe AS-Interface slave and is snapped onto the back of the EMERGENCY STOP device that is not in- cluded in the scope of supply.
  • Page 123: As-Interface Enclosure

    Addressing is via the AS-Interface connections or via the built-in addressing socket. An external supply voltage does not have to be connected. Order No. Number of com- mand points 3SF5 801-3AA08 3SF5 801-3AB08 3SF5 802-4DA00 3SF5 802-4DB00 3SF5 803-4DA00 3SF5 803-4DC00 3SF5 803-4DB00 Siemens IK PI · 2004 6/123...
  • Page 124 SIGNUM 3SB3 Command Devices mounted in front panels. AS-Interface front panel module AS-Interface enclosure 6/124 Siemens IK PI · 2004 ■ Design AS-Interface enclosure The enclosures with two, three, four and six command points are equipped with a 4I/4O slave.
  • Page 125 (refer to price list). The additional prices include all components which depend on the selected configuration options, i.e. type of actuating ele- ments, contacts, lampholders and accessories, such as labels, lamps, connections sockets, a second slave etc. Siemens IK PI · 2004 6/125...
  • Page 126 LED (LED color is same as the color of the actuating element/signalling device) 6/126 Siemens IK PI · 2004 Siemens AG, A&D CD GKA LZA Amberg, fax: +49 96 21 80-31 02 Order ID of purchaser/order ID I...
  • Page 127 LED (LED color is same as the color of the actuating element/signalling device) SIGNUM pushbuttons and indicator lights AS-Interface customized enclosures Siemens AG, A&D CD GKA LZA Amberg, fax: +49 96 21 80-31 02 Order ID of purchaser/order ID I ´...
  • Page 128 1) For more detailed information about individual actuating elements, see Section Pushbuttons and Light Indicators / SIGNUM 3SB3 / Pushbuttons and Pressure Switches onward. 2) Cannot be used with front panel module. 6/128 Siemens IK PI · 2004 Code for design/color of controls black yellow BV BK –...
  • Page 129 K2 WH – BK2 BU – BK2 CL – K4 WH – BK4 BU – BK4 CL – K5 WH – BK5 BU – BK5 CL – K6 WH – – K7 WH – Siemens IK PI · 2004 6/129...
  • Page 130 - Lock no. 73034 1) Required when more than four inputs or more than four outputs are required for supplying the control devices. 6/130 Siemens IK PI · 2004 Code for design/key removal position of locks RSB 1A RSB 1E –...
  • Page 131 – – CES 6AD – – Z-J 6AD – – BKS 6AD – – OMR BK 6AD – – – – – – – – – – – – – – – – – Siemens IK PI · 2004 6/131...
  • Page 132 AS-Interface Slaves SIGNUM pushbuttons and indicator lights AS-Interface customized enclosures and front panel modules ■ Dimensional drawings AS-Interface front panel module 6/132 Siemens IK PI · 2004...
  • Page 133: As-Interface Led Displays

    Limit value curve identical to EN 55 022 Basic technical standard EN 50 082-2, March 1995 Edition Color Green Green AS-Interface Slaves AS-Interface LED displays Order No. 3SF4 102-1B 3SF4 102-2B 3SF4 102-1D 3SF4 102-2D Siemens IK PI · 2004 6/133...
  • Page 134: As-Interface For Logo

    AS-Interface connection for LOGO! 3RK1 400-0CE10-0AA2 6/134 Siemens IK PI · 2004 With the AS-Interface for LOGO! an intelligent slave can be inte- grated into the AS-Interface system. Modular integration permits different basic units to be integrated into the system whenever the functionality is required.
  • Page 135 The following earth faults are recognized: • AS-i ”+” earth fault • AS-i ”-” earth fault • Earth faults of sensors and actuators which are supplied by the AS-Interface voltage. One module for each AS-Interface system is sufficient. Siemens IK PI · 2004 Introduction 6/135...
  • Page 136 • Output connection shield S • Output connection Ground • Dimensions (W x H x D) in mm • Mounting 6/136 Siemens IK PI · 2004 AS-Interface power supply unit Single output IP20 Output current 2.4 A Output current 4 A...
  • Page 137 30 V DC 3RX9 306-1AA00 30 DC/24 DC ± 29.5 to 31.6 DC/24 DC > 4/> 5 (power boost 4.5 / 5.5) SELV to EN 60 950 (in preparation) CE, UL, CSA (in preparation) Siemens IK PI · 2004 6/137...
  • Page 138 • Output connection shield S • Dimensions (W x H x D) in mm • Mounting Special function 6/138 Siemens IK PI · 2004 AS-Interface power supply unit Single Output IP20 6EP1 354-1AL01 120 to 230 AC With variable range input...
  • Page 139 115/230 V AC (selectable) 4 A /4 A 5 A (24 V) 4 A (AS-i) Power supply units IP20 Order No. 3RX9 307–0AA00 3RX9 307–1AA00 4FD5 213-0AA10-1A 6EP1 354-1AL01 3RX9 310–0AA00 3RX9 305–1AA00 3RX9 306–1AA00 Siemens IK PI · 2004 6/139...
  • Page 140 AS-Interface Power Supply Units Power supply units IP20 ■ Dimensional drawings 3RX9 307-0AA00 3RX9 307-1AA00 3RX9 305-1AA00, 3RX9 306-1AA00 6/140 Siemens IK PI · 2004 3RX9 310-0AA00 6EP1 354-1AL01...
  • Page 141 500 mm 3-wire conductor AWG 14 500 mm 3-wire conductor AWG 14 ´ ´ Wall mounting 6-pole connector for input voltage (6ES5 760-2CA11) and AS-Interface coupling module PG (3RG9 220-0AA00) must be ordered separately Siemens IK PI · 2004 6/141...
  • Page 142 AS-Interface power supply unit IP65 Single output Single output 3RX9 311–0AA00 6EP1 632–1AL01 ■ Dimensional drawings 3RX9 311-0AA00 6EP1 632-1AL01 6/142 Siemens IK PI · 2004 Output current in A Order No. Rated input voltage in V 230 AC 3RX9 311-0AA00 24 DC...
  • Page 143 UL 1685 CSA FT4 Resisting Resisting Resisting Resisting AS-Interface Transmission media AS-Interface shaped cable (Polyurethane) -50 to +90 -50 to +90 Brown, blue Good flame-retardant acc. to IEC 60332-1 VDE 0482 T. 265-2-1 Resisting Resisting Siemens IK PI · 2004 6/143...
  • Page 144 The trailing chain was fitted with 3 AS-i cables and various different round cables for this purpose. After 3 million bending operations (vertical), there was no damage to the cores or litz wires or to the outer casing (trailing chain equipped to 50% capacity). 6/144 Siemens IK PI · 2004 EPDM (rubber) (special PVC compound)
  • Page 145 AS-Interface segment with the AS-Interface slaves to a max. 100 m. A considerably greater cable length than 300 m can be achieved when the repeaters are connected in parallel. The maximum extension range is 500 m. Siemens IK PI · 2004 Repeater/Extender 6/145...
  • Page 146 • Indication of correct AS-Interface voltage. • Installed in user module housing with FK-E coupling module as bottom part. Extender connection 6/146 Siemens IK PI · 2004 ■ Ordering data Order No. Repeater for AS-Interface 6GK1 210-0SA00 For extending the cable run incor-...
  • Page 147 1 min. after the last button operation. 0 to +55 -20 to +55 (without batteries) Max. 75, condensation must be prevented Up to 2,000 Indoors only IP50 IP20 84 x 195 x 35 via M12 socket Siemens IK PI · 2004 Addressing units 6/147...
  • Page 148 1) Not included in scope of supply of addressing unit 3RK1 904 0AB01. 2) Ordering is only possible via the following address: Gossen-Metrawatt GmbH, Thomas-Mann-Str. 16-20, 90471 Nuremberg, Germany Tel.: +49 911/8602-111, Fax: +49 911/8602-777, e-mail: info@gmc-instruments.com 6/148 Siemens IK PI · 2004 Order No. 3RK1 904-2AB01 3RK1 901-1MA00 3RX1 642 Z231A...
  • Page 149 The error rates per slave are displayed in a traffic signal function (green, yellow, red). The slave configuration and the currently transmitted data are displayed in a clear manner. The expanded statistics provides information on the numerical data of the transmitted telegrams. Siemens IK PI · 2004 Diagnostic units 6/149...
  • Page 150 Cable: PUR Length: 5 m Color: black 6/150 Siemens IK PI · 2004 Test report The recorded data of the online statistics can be simply output and documented in a test report. This provides proof of the state of the installation for approvals or for servicing.
  • Page 151 3RX9 801-0AA00 3RK1 901-1KA00 3RK1 901-1KA01 3RK1 901-1PN00 3RX9 805-0AA00 3RX9 808-0AA00 3RX9 806-0AA00 3RX9 807-0AA00 3RX9 818-0AA00 3RX9 816-0AA00 3RX9 817-0AA00 3RK1 901-3QM00 3RK1 901-3QM10 3RK1 901-3QM01 3RK1 901-3QM11 3RK1 901-3QA00 3RK1 901-1MN00 Siemens IK PI · 2004 6/151...
  • Page 152 • by faxing to Fax. No. +49 911 978-33 21 supplying the refe- rence code CD/Z 735 and your address or on the Internet under the heading Documentation: Additional information is available in the Internet under: http://www.siemens.de/as-interface 6/152 Siemens IK PI · 2004 Order No. 3RX9 800-0AA00 3RG9 001-0AD00...

This manual is also suitable for:

50295

Table of Contents