Band Selection - Siemens S65 User Manual

Your service provider is displayed:
Display list of preferred
§List§
networks.
Create/change entry:
or select an existing entry,
<Empty>
then select a new service
provider in the list and
confirm.
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and
save it.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a differ-
ent network. This can change when the tel-
ephone is next switched on or if another
network is selected manually.

Band selection

Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group
Depending on the service provider,
you can create groups with this serv-
ice. These can have access to inter-
nal (company) information, for
example, or special rates apply.
Please check with your service pro-
vider for details.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
b
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configu-
ration).
Setup 97
b