Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Rear Observation System Package
Features:
Rearview Mirror with 4" LCD
2 Built in Speakers
Rearview Camera Input
Auxiliary Video Input
Video System Auto Detection for PAL/NTSC
Audiovox Navigation Input
Cellular Phone Hands Free Input
Hands Free Microphone Built-In
NOTE:
Hands free feature may not operate with all cellular phones
and/or an adapter may be required. Rearview camera optional.
Model RVMPKG2
Installation Manual
1
Advertisement
Table of Contents
Related Manuals for Audiovox Rear Observation System Package RVMPKG2
Summary of Contents for Audiovox Rear Observation System Package RVMPKG2
- Page 1 Rear Observation System Package Features: Rearview Mirror with 4” LCD 2 Built in Speakers Rearview Camera Input Auxiliary Video Input Video System Auto Detection for PAL/NTSC Audiovox Navigation Input Cellular Phone Hands Free Input Hands Free Microphone Built-In NOTE: Hands free feature may not operate with all cellular phones and/or an adapter may be required.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Cautions! ... 3 Preface ... 4 WARNING:... 4 Packing list ... 4 1. Installation Instructions ... 5 2. Install the mobile phone hands free seat... 6 3. Signal Inputs... 8 4. Controls and Indicators ... 9 SW1, SW2 and SW 3: ... 10 Specifications... -
Page 3: Cautions
The product is intended to assist in safe driving and to allow the driver to have a broader rearview while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to the country and their local traffic regulations. -
Page 4: Preface
There is a blind spot that exists at the back of a vehicle while the vehicle is in reverse. Equipped with a camera, this rearview mirror/monitor ensures safety by providing the driver with a clear and wide image of the area behind the vehicle while it is in reverse. -
Page 5: Installation Instructions
1. Installation Instructions Mount the mirror/monitor onto the existing rearview mirror. a) Stick two adhesive foam backings on to the back of mirror in the two small rectangle indents. b) Take the two seven inch belts and slide them into the slots on the top rear of the mirror with grooved side of the belt facing down. -
Page 6: Install The Mobile Phone Hands Free Seat
e) Cut off the excess part of the 7-inch strap Plug the Mitsumi connector from the Audiovox navigation monitor cable (part #112C3080) into the receptacle at the top backside of the mirror/monitor screen. Route the rest of the monitor cable to the Navigation computer. - Page 7 Tear off the adhesive tape on the back of the hands free seat. Press tightly to seat on to the selected surface for 30 seconds till the two surfaces are tightly glued. NOTE: Make sure the two surfaces are glued tightly! Clean a place on the back of the cell phone, keeping it dry.
-
Page 8: Signal Inputs
3. Signal Inputs The signal input connections for the system include: (1) Rear Camera: By connecting rear camera with control box plug, users can see the rearview when the vehicle is in reverse. (2) Hands Free Jack: Put the hands free plug (3.5mm) into hands free jack and put the other side of plug into the headphone jack of the mobile phone. -
Page 9: Controls And Indicators
4. Controls and Indicators Figure 6 illustrates the controls and indicators of the RVMPKG2 rear view mirror: Rearview mirror C: Hands free Microphone Power indicator (Red when ignition is on) G: Switch 1 (see below) Switch 3 (see below) Figure 5 Figure 6 B: 4”... -
Page 10: Sw1, Sw2 And Sw 3
Infra- RED receiver for Navigation remote control N: 2-position switch for hands free microphone sensitivity High/Low select SW1, SW2 and SW 3: Vehicle Reversing SW 1: No function SW 2: No function SW 3: No function Vehicle driving: SW1: Turn on the Navigation display timer mode. When SW1 is pressed, the LED will turn yellow. - Page 11 Vehicle Parked: SW1: Used to turn the LCD on/off when using the AUX video and audio input. The parking brake must be engaged. SW2: Used to turn off and on the Navigation image. SW: 3 When pressed and held, the rear camera image appears on the mirror.
-
Page 12: Specifications
General Power Supply Power Consumption Current Draw Video Input Audio Input Audio Power Output Operating Temperature Overall Dimension Display System Screen Brightness Contrast ratio Viewing Angle Resolution Video Format Display Format Specifications 12VDC <12W <500 mA 1Vp -p@ 75 Impedance <=1V 0.5W ×... -
Page 13: Maintenance
Maintenance Your rearview mirror requires little care, however to maintain it in optimum condition follow the procedures below: Keep your system away from excessive moisture, extreme heat or cold and magnetic fields. Keep liquids away from the display. Do not place external devices or other objects on the top of the mirror. Occasionally clean the surface of the mirror with a soft cloth moistened with water, or a window cleaner. - Page 14 Symptoms When the Hands Free Phone Function is not working? Table 2 Hands Free Phone Solutions 1. Check the volume control knob whether the volume is set too low. 2. Check to see if the hands free cable plug to the phone hand set input jacket is properly connected.
- Page 15 © 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-6655...