Glossary; Lens Shift; Aspect Ratio; Keystone Correction - Sharp Notevision PG-B10S Operation Manual

Glossary

Anti-Theft
If the "Keycode" set in the projector is not correctly
entered, the projector will not operate even if sig-
nals are entered.

Aspect Ratio

Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background
Initial setting image projected when no signal is
being output.
Border
Projects a 4:3 image fully within a 16:9 screen by
keeping the aspect ratio at 4:3.
Clock
Clock adjustment is used to adjust vertical noise
when clock level is incorrect.
CLR Temp (Color temperature)
Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
jector. Decrease the color temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.
Dot by dot
Mode that projects images in their native resolution.
Gamma
Image quality enhancement function that offers a
richer image by brightening the darker portions of
the image without altering the brightness of the
brighter portions. You can select four different
modes: STANDARD, PRESENTATION, CINEMA
and GAME.
Intelligent compression
High quality resizing of lower and higher resolu-
tion images to fit the projector's native resolution.
Keylock
Mode that can lock the operation of projector but-
tons to prevent unauthorized adjustment.

Keystone Correction

Function to digitally correct a distorted image
when the projector is set up at an angle, smooth-
ens out jaggies on keystone images and com-
presses the image not only horizontally but verti-
cally keeping the 4:3 aspect ratio.
-76

Lens shift

Function to adjust the position of the projection
image by using the lens shift lever to move the
lens from side to side and up and down (360°).
Password
A password is set so that changes cannot be made
in the "Anti-Theft" setting.
Phase
Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.
Resize
Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select four different modes: NORMAL, DOT BY
DOT, BORDER and STRETCH.
sRGB
An international standard of color reproduction
regulated by the
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the color
changes according to LCD features, so that the
images are displayed in a natural tint based on
an original image, when "sRGB" is set to "ON".
Stretch
Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen.
IEC (International