Setting Up The Screen - Sharp Notevision PG-B10S Operation Manual

Sharp lcd projector pg-b10s operation manual
Hide thumbs Also See for Notevision PG-B10S:
Table of Contents

Advertisement

Setting up the Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.
Note
The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
I Place the projector at the required distance from
the screen according to the desired picture size.
(See page 57.)
Example of standard setup
Screen size : 100 inch (254 cm)
Side View
Screen
H2
-8
1
/
"(-20.5 cm)
16
Top View
Screen
Center of screen
-56
STRETCH Mode : 16:9
Lens center
Lower lens shift
position
(High mount setup)
Lens center
Upper lens shift
position
(Desktop setup)
Lens center
Leftmost lens shift
position
Lens center
Rightmost lens shift
position
The distance from the screen
to the projector may vary
depending on the size of the
screen.
The default setting can be used,
when placing the projector in front
of the screen. If the projected im-
age is reversed, readjust the set-
ting to "Front" in the "PRJ Mode"
menu.
Place the projector so that an
imaginary horizontal line that
passes through the center of the
lens is perpendicular to the
screen.
P.57
P.49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents