Enhancing Your System; Video/Auxiliary (Audio Signal) Input Jacks - Sharp XL-UH242 Operation Manual

Sharp operation manual micro component system xl-uh242
Hide thumbs Also See for XL-UH242:
Table of Contents

Advertisement

Enhancing your system

The connection cord is not included. Purchase a commercially
available cord as shown below.
VIDEO/AUX IN
RIGHT
LEFT
ANTENNA
FM
75 OHMS
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT
LEFT
TUNER
CD
(BAND)
Auto power on function:
When you press any of the following buttons, the unit turns on.
VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the "USB" or "AUX" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
GND
AM
VIDEO/AUX IN
RIGHT
LEFT
Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection cord to connect the VCR, DVD, etc. to the
VIDEO/AUX IN jacks.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX/USB button.
4
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the
television.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging
in
the
headphones
automatically. Adjust the volume using the VOLUME control.
disconnects
the
speakers
XL-UH242
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents