Sharp XL-UH242 Operation Manual page 31

11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
12
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is canceled. Cancel the
daily timer when it is not in use.
Note:
When performing timer playback using another unit connected to the
USB terminal or AUX IN jacks, select "USB" or "AUX" in step 8.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit to AUX IN jacks will not turn on or off.
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"ONCE CALL" or "DAILY CALL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Canceling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"ONCE OFF" or "DAILY OFF", and press the MEMORY button.
Timer will be canceled (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"ONCE ON" or "DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
XL-UH242
or button to select
or button to select
or button to select
or button to select
or button to select
or button to select
31