Mp3 Indicator; Wma Indicator; 16. Disc Or Usb Play Indicator - Sharp XL-UH242 Operation Manual

Sharp operation manual micro component system xl-uh242
Hide thumbs Also See for XL-UH242:
Table of Contents

Advertisement

1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 3" (8 cm) disc in the middle of the disc trays.
5
Press the
OPEN/CLOSE button to close the disc tray 1.
TOTAL indicator
[CD]
Total number of
Total playing
tracks on the disc
time of the disc
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
You can place discs on the trays 2 - 5 by following steps
3 - 5.
7
Press the
/
button to start playback.
5" (12 cm)
3" (8 cm)

MP3 indicator

WMA indicator

[MP3/WMA]
Total number
of files
Disc play indicator
Playback will begin from track 1 on DISC 1. After that disc
finishes playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop
automatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
To exchange other discs while playing a disc:
Press one of the
1 -
5 buttons for the stopped disc and within 5
seconds, press the
OPEN/CLOSE button and exchange discs.
To remove the discs:
In the stop mode, press the
press the
OPEN/CLOSE button.
To skip to a desired disc:
Press one of the
1 -
5 buttons and within 5 seconds, press the
(CD ) button.
Caution:
Do not place two discs in a same tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the power is
restored.
If the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will be
skipped.
1 -
5 button and within 5 seconds,
XL-UH242
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents