Simple Button Operations For Changing Channels - Sharp Aquos LC-42D62U Operation Manual

Watching TV
Method 1
Using CH A/Von the remote control unit or on the
1V.
You can change channels in several ways.
- VOL
+
V CH A
o
INPUT POWER
Method
2
1 Press FLASHBACK to switch to the previously tuned
channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9,
e
(DOT) to select
channels for VHF/UHF/CA1V/DIGITAL.
VOL
SURROUND
j+)
aU
INPUT FLASHBACK
o
CH
MUTE
o
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press
5~ENT
FREEZE MENU
o~o
888
EXIT ~ RETURN
o~o
- FAVORITE CH -
0®@@
AQuas
SHARP
(l>
When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press
1~1~5
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
~2~
• (DOT)
~
1
~ENT
• When you enter 0-9 only, channei selection will be made if
there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
@-17