Sign in today to find solutions:

Don't have an account? Sign up

Sharp LC-42D62U Operation Manual

Sharp liquid crystal television manual lc-26ga4u.

 
LC-42D62U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN

Summary of Contents

  • Page 1

    LC-42D62U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN...

  • Page 2: Important Information

    DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. LC-42D62U ENGLISH OPERATION MANUAL Model No.: Serial No.: The lightning flash with arrow-head...

  • Page 3: Trademarks

    DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-42D62U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 4: Dear Sharp Customer, Important Safety Instructions

    DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.

  • Page 5

    IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. •...

  • Page 6

    IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

  • Page 7: Supplied Accessories, Quick Reference, Attaching The Stand

    Supplied accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery ( g 1) ( g 2) Page 8 Page 8 NOTE • Always use the AC cord supplied with the TV. QUICK REFERENCE Attaching the stand •...

  • Page 8

    QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water.

  • Page 9

    IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ Setup and basic channel setup functions and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your AQUOS operation manual.

  • Page 10: Table Of Contents

    Contents IMPORTANT INFORMATION ... 1 Trademarks ... 2 DEAR SHARP CUSTOMER ... 3 IMPORTANT SAFETY INSTRUCTIONS ... 3 Supplied accessories ... 6 QUICK REFERENCE ... 6 Attaching the stand ... 6 Contents ... 9 Part names ... 10 TV (Front) ... 10 TV (Rear) ...

  • Page 11: Part Names, Tv (front), Tv (rear)

    Part names TV (Front) Remote control sensor OPC sensor* NOTE *OPC: Optical Picture Control (See page 25.) **See page 15 for TV status indicator. TV (Rear) HDMI terminal (INPUT 5) HDMI terminal (INPUT 4) DIGITAL AUDIO OUTPUT terminal Antenna/Cable in AUDIO terminal (INPUT 4) INPUT 3 terminals INPUT 1 terminals...

  • Page 12: Remote Control Unit

    Part names Remote control unit NOTE • When using the remote control unit, point it at the TV. TV POWER: Switch the TV power on or enters standby mode. (See page 15.) DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off.

  • Page 13: Preparation, Using The Remote Control Unit, Cautions Regarding The Remote Control Unit, Antennas

    Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding the remote control unit •...

  • Page 14: Connecting A Blu-ray Disc Player, Hd-dvd Player Dvd Player Or A Digital Tv Stb (air Or Cable)

    Preparation You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV.

  • Page 15: Connecting Hdmi Equipment, Connecting A Pc Format, Pc Format Compatibility Chart

    Preparation Connecting HDMI equipment You can use the INPUT 4 or INPUT 5 terminal when connecting HDMI equipment. HDMI cable (commercially available) HDMI equipment NOTE • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 4. •...

  • Page 16: Watching Tv, Turning On The Power, Turning Off The Power

    Watching TV Simple operations for watching a TV program POWER POWER indicator OPC indicator SLEEP indicator TV POWER (On/Standby) TV status indicator (POWER) Lighting (Green) OFF/Standby Lights off Turning on the power Press POWER on the TV, or TV POWER on the remote control unit.

  • Page 17: Initial Setup

    Watching TV Initial setup When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. Insert the batteries into the remote control unit. (See page 8.) Connect the antenna cable to the TV.

  • Page 18: Simple Button Operations For Changing Channels

    Watching TV Simple button operations for changing channels You can change channels in several ways. Method 1 Using CH r / s on the remote control unit or on the Method 2 1 Press FLASHBACK to switch to the previously tuned channel.

  • Page 19: Simple Button Operations For Changing Volume/sound

    Watching TV Simple button operations for changing volume/sound ■ Changing the volume You can change the volume on the TV or on the remote control unit. ■ Using VOLk/l • To increase the volume, press VOL k . • To decrease the volume, press VOL l . Volume adjustment NOTE •...

  • Page 20: Setting Mts/sap Stereo Mode, Setting Digital Broadcasting Audio Mode

    Watching TV Setting MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP).

  • Page 21: Basic Adjustment Settings, Menu Operation Buttons, On-screen Display

    Basic adjustment settings Menu operation buttons Use the following buttons on the remote control to operate the menu. MENU: Press to open or close the menu screen. a / b / c / d : Press to select a desired item on the screen or adjust a selected item.

  • Page 22: Menu Items For Tv/input 1/2/3, Menu Items For Hdmi (input 4/5)

    Basic adjustment settings Menu items for TV/INPUT 1/2/3 Picture OPC ... Page 25 Backlight ... Page 25 Contrast ... Page 25 Brightness ... Page 25 Color ... Page 25 Tint ... Page 25 Sharpness ... Page 25 Advanced Color Temp..Page 26 Black ...

  • Page 23: Ez Setup, Channel Setup

    Basic adjustment settings EZ Setup You can run EZ Setup again, even after setting up the preset channels. Language setting Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “EZ Setup”, and then press ENTER.

  • Page 24: Antenna Setup-digital

    Basic adjustment settings Channel memory setting Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “CH Setup”, and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here.

  • Page 25: Favorite Channel Setting

    Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Using FAVORITE CH on the remote control unit Select the channel you want to register as a favorite channel.

  • Page 26: Picture Adjustments, Opc Setting

    Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings. Press MENU to display the MENU screen, and then press c / d to select “Picture”. Press a / b to select a specifi c adjustment item.

  • Page 27: Advanced Picture Adjustments, Color Temperature, Black, D-y/c, Monochrome, Film Mode (3:2 Pull-down), Range Of Opc

    Basic adjustment settings Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. Press MENU to display the MENU screen, and then press c / d to select “Picture”. Press a / b to select “Advanced”, and then press ENTER.

  • Page 28: Sound Adjustment, Surround

    Basic adjustment settings Sound adjustment You can adjust the sound quality to your preference with the following settings. Press MENU to display the MENU screen, and then press c / d to select “Audio”. MENU [ Audio ] Audio Power Control Treble [ 0] Bass...

  • Page 29: Power Control, Digital Setup, Audio Setup

    Basic adjustment settings Power Control Power control setting allows you to save energy. No signal off When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes. Press MENU to display the MENU screen, and then press c / d to select “Power Control”.

  • Page 30: Using External Equipment, Displaying An External Equipment Image, Input Select

    Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV. Press INPUT. • A list of selectable sources appears. INPUT SOURCE INPUT1 INPUT2 INPUT3 INPUT4...

  • Page 31: Displaying An Image From Hdmi Equipment, Input Skip

    Using external equipment Displaying an image from HDMI equipment To watch an HDMI equipment image, select “INPUT4” or “INPUT5” from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV. INPUT SOURCE INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Press MENU to display the MENU screen, and then press c / d to select “Option”.

  • Page 32: Useful Adjustment Settings, Language Setting, Image Position, Reset

    Useful adjustment settings Language setting You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “Language”, and then press ENTER.

  • Page 33: Input Label, Sleep Timer

    Useful adjustment settings Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press INPUT to select the desired input source. Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “Input Label”, and then press ENTER.

  • Page 34: View Mode For 4:3 Programs, View Mode For Hd Programs

    Useful adjustment settings View Mode for 4:3 Programs Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. View Mode Side Bar S. Stretch Zoom Stretch Press VIEW MODE or a / b while the View...

  • Page 35: View Mode (for Pc Format)

    Useful adjustment settings View Mode (for PC format) You can select the screen size. NOTE • Connect the PC before making adjustments. (See page 14.) • Selectable screen size may vary with input signal type. Press VIEW MODE. • The View Mode menu displays. Example View Mode Normal...

  • Page 36: Advanced Option Settings, Audio Only, Digital Noise Reduction, Output Select, Color System, Program Title Display

    Useful adjustment settings Advanced Option settings Perform the following steps to set the Option menu items on this page. Press MENU to display the MENU screen, and then press c / d to select “Option”. Press a / b to select a specifi c adjustment item, and then press ENTER.

  • Page 37: Input Signal (for Pc Format)

    Useful adjustment settings AV MODE AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.

  • Page 38: Closed Captions And Digital Closed Captions

    Useful adjustment settings Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.

  • Page 39: Caption Setup

    Useful adjustment settings Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. Press MENU to display the MENU screen, and then press c / d to select “Option”. Press a / b to select “Caption Setup”, and then press ENTER.

  • Page 40: Secret Number Setting For Parental Control

    Useful adjustment settings Secret number setting for parental control Allows you to use a secret number to protect certain settings from being accidentally changed. IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 39 to 44): 1 Secret No. is registered. 2 V-Chip/V-Chip (DTV Only) settings have been made.

  • Page 41

    Useful adjustment settings Changing the secret number Allows you to change your current secret number. Repeat steps 1 to 2 in Setting a secret number. • The secret number setting menu displays. Input the 4-digit secret number by using 0–9. Press a / b to select “Secret No.”, and then press ENTER.

  • Page 42: Parental Control (setting V-chip Level)

    Useful adjustment settings Parental control (setting V-CHIP level) V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.

  • Page 43

    Useful adjustment settings Voluntary movie rating system (MPAA) Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “Parental CTRL”, and then press ENTER. • The secret number setting menu displays only when “Secret No.”...

  • Page 44

    Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.

  • Page 45: How To Temporarily Release The V-chip Block, Reactivating The Temporarily Released V-chip Block

    Useful adjustment settings Canadian English ratings Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “Parental CTRL”, and then press ENTER. • Secret number setting menu displays only when “Secret No.”...

  • Page 46: Other Viewing Options, Freezing Images, Presetting Remote Control Function

    Other viewing options Freezing images Allows you to capture and freeze a moving image that you are watching. Press FREEZE. • A moving image is captured. Press FREEZE again to cancel the function. NOTE • When this function is not available, “No displaying still image available.”...

  • Page 47

    Other viewing options Manufacturer codes REMOTE CONTROL CODE VCR BRAND DVD/LD BRAND NUMBER CATV/SAT BRAND NOTE • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER...

  • Page 48

    Other viewing options ■ Cable control buttons When the FUNCTION is set to CBL/SAT, the cable converter connected to the TV can be operated using 1 to 4. SOURCE POWER Turns the cable converter power on and off. 0–9 Press a button (or buttons) that corresponds to the channel that you wish to watch.

  • Page 49

    Other viewing options ■ VCR control buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 can be used to control the VCR.

  • Page 50: Appendix, Removing The Stand, Setting The Tv On The Wall

    Setting the TV on the wall CAUTION • This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

  • Page 51: Troubleshooting, Troubleshooting-digital Broadcasting

    Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color, light color, or color misalignment • Power is suddenly turned off. • No picture •...

  • Page 52: Specifi Cations, Optional Accessory

    The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.

  • Page 53

    CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number input screen displays.

  • Page 54: Calling For Service, Limited Warranty

    Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.

  • Page 56

    Dimensional drawings Unit: inch/(mm) (540) (1031) (96) (134) (933.0) (292) (200)

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: