Table of Contents
Advertisement
Quick Links
LC-32GP1U
LC-37GP1U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT : Please read this operation manual before
starting operating the equipment.
IMPORTANTE : Lea este manual de operación antes de
comenzar a operar el equipo.
ENGLISH
ENGLISH
FRANÇAIS
FRANÇAIS
ESPAÑOL
ESPAÑOL
Advertisement
Table of Contents
Related Manuals for Sharp Aquos LC-32GP1U
Summary of Contents for Sharp Aquos LC-32GP1U
- Page 1 LC-32GP1U LC-37GP1U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
-
Page 3: Important Information
LC-32GP1U LC-37GP1U LIQUID CRYSTAL TELEVISION OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. • The examples used throughout this manual are based on the LC-37GP1U model. -
Page 4: Trademarks
DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32GP1U/LC-37GP1U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Dear Sharp Customer
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. - Page 6 IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. •...
- Page 7 IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
-
Page 8: Supplied Accessories
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery (g1) (g2) Page 8 Page 8 NOTE • Always use the AC cord supplied with the TV. QUICK REFERENCE Attaching the stand •... - Page 9 QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water.
- Page 10 IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ Setup and basic channel setup functions and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc.) in your...
-
Page 11: Table Of Contents
Contents IMPORTANT INFORMATION ... 1 Trademarks ... 2 DEAR SHARP CUSTOMER ... 3 IMPORTANT SAFETY INSTRUCTIONS ... 3 Supplied accessories ... 6 QUICK REFERENCE ... 6 Attaching the stand ... 6 Contents ... 9 Part names ...10 TV (Front) ...10 TV (Rear/Side) ...10... -
Page 12: Part Names
Part names TV (Front) Remote control sensor OPC sensor* NOTE *OPC: Optical Picture Control (See page 27.) **See page 17 for TV status indicator. TV (Rear/Side) HDMI terminal (INPUT 5) HDMI terminal (INPUT 6) DVI-I terminal (INPUT 7) DIGITAL AUDIO OUTPUT terminal AUDIO terminal (INPUT 7) AUDIO terminals (INPUT 6) Antenna/Cable in... -
Page 13: Remote Control Unit
Part names Remote control unit NOTE • When using the remote control unit, point it at the TV. TV POWER: Switch the TV power on or enters standby. (See page 17.) DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off. -
Page 14: Preparation
Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding the remote control unit •... -
Page 15: Connecting A Game Console
Preparation You can connect many types of external equipment to your TV like a game console, Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 31 to 33.) CAUTION •... -
Page 16: Connecting A Blu-Ray Disc Player, Hd-Dvd Player, Dvd Player Or A Digital Tv Stb (Air Or Cable)
Preparation Connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital TV STB (Air or Cable) You can use the INPUT 1, INPUT 2, INPUT 3 or INPUT 7 terminals when connecting to a Blu-ray disc player, HD- DVD player, DVD player, a Digital TV STB (Air or Cable) and other audiovisual equipment. -
Page 17: Connecting A Vcr, Game Console Or Camcorder
Preparation Connecting a VCR, game console or camcorder A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the INPUT 1 or 2 terminals. When using S-VIDEO cable. (INPUT 2) S-VIDEO cable (commercially available) Audio cable (commercially available) VCR/Game console/Camcorder When using composite cable. -
Page 18: Connecting A Pc
Preparation Connecting a PC When connecting to a PC with a DVI terminal. (INPUT 7) RGB/DVI Conversion cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) NOTE • If you are connecting the TV to a PC with a DVI terminal, use a DVI cable (commercially available) instead of a RGB/DVI conversion cable. -
Page 19: Watching Tv
Watching TV Simple operations for watching a TV program POWER POWER OPC indicator indicator SLEEP indicator TV POWER (On/Standby) TV status indicator (POWER) Lighting (Green) Standby Lights off Turning on the power Press POWER on the TV, or TV POWER on the remote control unit. -
Page 20: Initial Setup
Watching TV Initial setup When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 8.) 2. -
Page 21: Simple Button Operations For Changing Channels
Watching TV Simple button operations for changing channels You can change channels in several ways. Method 1 Using CH on the remote control unit or on the Method 2 1 Press FLASHBACK to switch to the previously tuned channel. 2 Press FLASHBACK again to switch back to the currently tuned channel. -
Page 22: Simple Button Operations For Changing Volume/Sound
Watching TV Simple button operations for changing volume/sound ■ Changing the volume You can change the volume on the TV or on the remote control unit. ■ Using VOLk/l • To increase the volume, press VOLk. • To decrease the volume, press VOLl. Volume adjustment NOTE •... -
Page 23: Setting Mts/Sap Stereo Mode
Watching TV Setting MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). -
Page 24: Basic Adjustment Settings
Basic adjustment settings Menu operation buttons Use the following buttons on the remote control to operate the menu. MENU: Press to open or close the menu screen. a/b/c/d: Press to select a desired item on the screen or adjust a selected item. ENTER: Press to go to the next step or complete the setting. -
Page 25: Menu Items For Tv/Input 1/2/3
Basic adjustment settings Menu items for TV/INPUT 1/2/3 Picture OPC ... Page 27 Backlight ... Page 27 Contrast ... Page 27 Brightness ... Page 27 Color ... Page 27 Tint ... Page 27 Sharpness ... Page 27 Advanced Color Temp..Page 28 Black ... -
Page 26: Ez Setup
Basic adjustment settings EZ Setup You can run EZ Setup again, even after setting up the preset channels. Language setting Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “EZ Setup”, and then press ENTER. -
Page 27: Antenna Setup-Digital
Basic adjustment settings Channel memory setting Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “CH Setup”, and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here. -
Page 28: Favorite Channel Setting
Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Using FAVORITE CH on the remote control unit Select the channel you want to register as a favorite channel. -
Page 29: Picture Adjustments
Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings. Press MENU to display the MENU screen, and then press c/d to select “Picture”. Press a/b to select a specifi c adjustment item. Press c/d to adjust the item to the desired level. -
Page 30: Advanced Picture Adjustments
Basic adjustment settings Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. Press MENU to display the MENU screen, and then press c/d to select “Picture”. Press a/b to select “Advanced”, and then press ENTER. Press a/b to select a specifi... -
Page 31: Sound Adjustment
Basic adjustment settings Sound adjustment You can adjust the sound quality to your preference with the following settings. Press MENU to display the MENU screen, and then press to select “Audio”. Audio Power Control Treble [ 0] Bass [ 0] Balance [ 0] Surround... -
Page 32: Power Control
Basic adjustment settings Power Control Power control setting allows you to save energy. No signal off When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes. Press MENU to display the MENU screen, and then press c/d to select “Power Control”. -
Page 33: Using External Equipment
Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV. Press INPUT. • A list of selectable sources appears. INPUT SOURCE INPUT1 INPUT2 INPUT3 INPUT4... - Page 34 Using external equipment DVI input signal setting (INPUT 7) Press INPUT to select INPUT 7. INPUT SOURCE INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT5 INPUT6 INPUT7 Press MENU to display the MENU screen, and then press c/d to select “Option”. Press a/b to select “Input Select”, and then press ENTER.
-
Page 35: Displaying An Image From Hdmi Equipment
Using external equipment Displaying an image from HDMI equipment To watch an HDMI equipment image, select INPUT4, INPUT 5 or INPUT 6 from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV. INPUT SOURCE INPUT1 INPUT2 INPUT3 INPUT4... -
Page 36: Useful Adjustment Settings
Useful adjustment settings Auto Sync. adjustment (for Analog PC input mode only) For automatically adjusting the PC image. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Auto Sync.”, and then press ENTER. -
Page 37: Language Setting
Useful adjustment settings Language setting You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Language”, and then press ENTER. -
Page 38: Input Label
Useful adjustment settings Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press INPUT to select the desired input source. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Input Label”, and then press ENTER. -
Page 39: View Mode For 4:3 Programs
Useful adjustment settings View Mode for 4:3 Programs Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. View Mode Side Bar S. Stretch Zoom Stretch Press VIEW MODE or... -
Page 40: View Mode (For Pc Input Mode)
Useful adjustment settings View Mode (for PC input mode) You can select the screen size. NOTE • Connect the PC before making adjustments. (See page 16.) • Selectable screen size may vary with input signal type. Press VIEW MODE. • The View Mode menu displays. Example View Mode Normal... -
Page 41: Advanced Option Settings
Useful adjustment settings Advanced Option settings Perform the following steps to set the Option menu items on this page. Press MENU to display the MENU screen, and then press c/d to select “Option”. Press a/b to select a specifi c adjustment item, and then press ENTER. -
Page 42: Av Mode
Useful adjustment settings AV MODE AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. -
Page 43: Closed Captions And Digital Closed Captions
Useful adjustment settings Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. -
Page 44: Caption Setup
Useful adjustment settings Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. Press MENU to display the MENU screen, and then press c/d to select “Option”. Press a/b to select “Caption Setup”, and then press ENTER. -
Page 45: Secret Number Setting For Parental Control
Useful adjustment settings Secret number setting for parental control Allows you to use a secret number to protect certain settings from being accidentally changed. IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 43 to 48): 1 Secret No. is registered. 2 V-Chip/V-Chip (DTV Only) settings have been made. - Page 46 Useful adjustment settings Changing the secret number Allows you to change your current secret number. Repeat steps 1 and 2 in Setting a secret number. • The secret number setting menu displays. Input the 4-digit secret number by using 0–9. Press a/b to select “Secret No.”, and then press ENTER.
-
Page 47: Parental Control (Setting V-Chip Level)
Useful adjustment settings Parental control (setting V-CHIP level) V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. - Page 48 Useful adjustment settings Voluntary movie rating system (MPAA) Press MENU to display the MENU screen, and then press to select “Setup”. Press to select “Parental CTRL”, and then press ENTER. • The secret number setting menu displays only when “Secret No.” is set. (See page 43.) •...
- Page 49 Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
-
Page 50: How To Temporarily Release The V-Chip Block
Useful adjustment settings Canadian English ratings Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Parental CTRL”, and then press ENTER. • Secret number setting menu displays only when “Secret No.” is set. (See page 43.) •... -
Page 51: Other Viewing Options
Other viewing options Freezing images Allows you to capture and freeze a moving image that you are watching. Press FREEZE. • A moving image is captured. Press FREEZE again to cancel the function. NOTE • When this function is not available, “No displaying still image available.”... - Page 52 Other viewing options Manufacturer codes REMOTE CONTROL CODE VCR BRAND NUMBER REMOTE CONTROL CODE DVD/LD BRAND NUMBER REMOTE CONTROL CODE CATV/SAT BRAND NUMBER NOTE • Numbers marked with * are SAT codes, all others are CATV codes. REMOTE CONTROL CODE AUDIO BRAND NUMBER...
- Page 53 Other viewing options ■ Cable control buttons When the FUNCTION is set to CBL/SAT, the cable converter connected to the TV can be operated using 1 to 4. 1 SOURCE POWER 2 0–9 3 FLASHBACK * 4 CH * Some manufacturers do not preset FLASHBACK. •...
- Page 54 Other viewing options ■ VCR control buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 ■...
-
Page 55: Appendix
Setting the TV on the wall CAUTION • This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. -
Page 56: Troubleshooting
Appendix Troubleshooting Problem • No power • Check if you pressed TV POWER on the remote control unit. (See page 17.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) •... -
Page 57: Specifi Cations
The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. - Page 58 CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number input screen displays.
-
Page 59: Calling For Service
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. -
Page 61: Dimensional Drawings
Dimensional drawings LC-32GP1U (701.4) LC-37GP1U (822.6) 797) (200) (919) (200) Unit: Inch/(mm) (507) (88) (97) (273) (540) (116) (97) (292) - Page 62 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-C866WJZZ 07P01-MX-NM...