Supplied Accessories; Quick Reference; Attaching The Stand - Sharp Aquos LC-32D62U Operation Manual

Supplied accessories

Make sure the following accessories are provided with the product.
Remote control unit "AAA" size battery
(g1)
Page 8
NOTE
• Always use the AC cord supplied with the TV.

QUICK REFERENCE

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm that there are 9 screws (all the same
1
size) supplied with the TV.
1 Set the post for the stand unit onto the
2
box.
2 Attach the base to the post.
3 Insert and tighten the 5 screws into the 5
holes on the bottom of the base.
Hex key
Screw
2
1
6
AC cord
(g2) (g1)
Page 8 Page 7
3
Cable Clamp (g1) Stand unit
Cable tie (g1)
Page 7
1 Insert the stand into the openings on the
3
bottom of the TV.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
2
NOTE
• To detach the stand, perform the steps in reverse order.
Operation manual
(g1) (g1)
Page 6
Hex key
Screw
Soft cushion
1