A: Misfeed In The Paper Feed Area - Sharp AL-1215 Operation Manual

Digital multifunctional system
Hide thumbs Also See for AL-1215:
Table of Contents

Advertisement

A: Misfeed in the paper feed area

1
Gently remove the misfed paper from the paper feed area as
shown in the illustration. When the misfeed (
blinks, and the misfed paper is not seen from the paper feed
area, pull out the paper tray and remove the misfed paper. If the
paper cannot be removed, proceed to "B: Misfeed in the fusing
area".
2
Close the side cover by pressing the round projections near
the side cover open button. The misfeed (
out and the start (
B: Misfeed in the fusing area
1
Lower the fusing unit release
lever.
64
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or other
injury.
• Do not touch the surface of the drum (green portion) of the
drum cartridge when removing the misfed paper. Doing so
may damage the drum and cause smudges on copies.
• If the paper has been fed through the multi-bypass tray, do
not remove the misfed paper through the multi-bypass tray.
Toner on the paper may stain the paper transport area,
resulting in smudges on copies.
) indicator will light up.
) indicator
) indicator will go
Fusing unit release lever

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Al-1540Al-1551Al-1530Al-1530csAl-1540csAl-1551cs

Table of Contents