Download Print this page

Using Unit As Hand Vacuum; Cleaning With Hose; Precautionary Measures - Shark V1510 Owner's Manual

Hand vacuum with motorized brush 120v., 60hz., 6.67 amps

Advertisement

PRECAUTIONARY MEASURES

IMPORTANT:
If the suction opening of the hose is BLOCKED, switch off the vacuum
cleaner and remove the blocking substance before you start the unit
again.
1.
Do not operate the vacuum
cleaner too close to heaters or
radiators.
2.
Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
3.
Before you start vacuuming, make
sure to remove large or sharp
objects that might damage the HEPA
Filter.
4.
When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
5.
Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
6.
Do not use without HEPA filter in
place.
7.
Do not bend, trample or pull the
hose by force. Do not operate
with a damaged hose.
8.
When vacuuming fine dust
particles such as gyproc dust,
flour or any other fine dust, empty
the dust cup and "TAPCLEAN"
the dust cup filter frequently to
avoid over heating the motor.
3
OPERATING INSTRUCTIONS
WARNING:
Always unplug from electrical
outlet before opening the dust cup
(container).
Note
: HEPA dust cup filter must be used
when operating the hand vacuum.
Using The Unit As A Hand
Vacuum
1. Insert the dusting brush/hose
connector into the brush chamber
exhaust port. Lock the flexible hose in
place by clipping the hose into the
hose holder. (Fig. 1)
Fig. 1
Cleaning With the Hose
To use the hand vacuum with only the
hose and the dusting brush or crevice
tool:
1. Rotate the brush cover by pushing on
the brush cover release button until it
clicks in place. (Fig. 2)
2. Remove the flexible hose from the
brush chamber exhaust port and take
the hose out from the hose holder.
(Fig. 3)
Fig. 2
Fig. 3
3. To use the flexible hose with the
dusting brush, hold the hose in one
hand and with the other, pull out the
dusting brush and turn clockwise to
lock in place. (Fig. 4)
Fig. 4
4. To use the flexible hose with the
crevice tool, make sure that the
brush is in the storage position
and insert the crevice tool into the
opening of the hose. (Fig. 5)
CAUTION:
The hand vacuum is a
very powerful unit. Make sure that you
hold it firmly, otherwise it can slip out
of your hand and cause injury.
4
Fig. 5

Hide quick links:

Advertisement

loading