Sennheiser EK 3253 Instructions For Use Manual page 24

Wireless in-ear monitoring system
Hide thumbs Also See for EK 3253:
Table of Contents

Advertisement

Note:
Before adjusting the squelch threshold to a different
setting, use the volume control
connected headphones to the minimum.
There are three possible squelch setting:
LO = low
MID = middle
HI
= high
CAUTION!
Selecting the setting "LO" reduces the squelch threshold,
selecting the setting "HI" increases the squelch threshold.
Adjust the squelch threshold – with the transmitter switched
off – to the lowest possible setting that suppresses hissing
noise.
Important note:
If the squelch threshold is adjusted too high, the trans-
mission range will be reduced. Therefore, always adjust
the squelch threshold to the lowest possible setting.
26
High volume levels can damage your hearing!
When in the setting mode of the "SQELCH"
menu, pressing the
three seconds will switch off the squelch.
"SQ.OFF" appears on the display. If no RF signal
is being received, hissing noise will occur.
This setting is for test purposes only and
must only be used by service technicians.
to set the volume for the
button for more than

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents