Sennheiser EK 3253 Instructions For Use Manual page 10

Wireless in-ear monitoring system
Hide thumbs Also See for EK 3253:
Table of Contents

Advertisement

"PILOT" display
The "PILOT" display
pilot tone evaluation is activated (see "Activating/deactivating
the pilot tone evaluation – PILOT" on page 29).
RF signal indication
The level display for RF signal "RF" shows the strength of the
received RF signal. In addition, the green LED (RF)
front of the receiver lights up when an RF signal is being
received.
However, the green LED (RF) does not light up when the audio
output is muted because
the RF signal of the received transmitter is too weak,
the transmitter is set to mono operation and the receiver's
pilot tone evaluation is deactivated.
Display backlighting
After pressing a button, the display remains backlit for approx.
10 seconds.
12
appears on the display panel when the
at the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents