Related Manuals for Sennheiser Set 810
Summary of Contents for Sennheiser Set 810
- Page 1 Set 810 Bedienungsanleitung Instruction Manual Notice d´emploi Istruzioni per l´uso Instrucciones para el uso Gebruiksaanwijzing Bruksanvisning...
- Page 2 Sennheiser a world leader in the field of audiology. The SET 810 is an assistive listening system for your radio, TV, hi-fi system or similar sound sources at the volume you choose. The system allows you to move around freely without the constrictions of cables within the room where the transmitter is placed.
- Page 3 Delivery includes The Set 810 consists of the following components and accessories: - Stethoset receiver - Transmitter (charging unit) - Rechargeable battery - Power supply - Connecting cable for headphone output - Adapter for SCART socket (except USA/Canada) - Adapter for RCA sockets...
- Page 4 Connecting the transmitter (charging unit) The rear of the transmitter is fitted with two audio inputs: A socket (LINE) for connection to the audio output or the headphone socket on your TV, and a microphone socket (MIC). Plug in one end of the connecting cable to the audio output or the headphone socket on your TV, and the other end to the LINE socket on the transmitter.
- Page 5 Where to place the transmitter Place the transmitter so that the infrared light beam is pointed directly at the receiver, i.e. there should be no obstacles in the light path between transmitter and receiver. Guide the cables backwards. Avoid exposure to direct sunlight. Direct sunlight may interfere with the reception and may damage the transmitter.
- Page 6 Using the stethoset receiver When putting the stethoset receiver on, make sure the operating control is pointing downwards and the letters are at the front. The stethoset receiver automatically turns on if you pull the earbows apart.
- Page 7 Adjusting the volume Adjust the receiver's volume with the operating control. Make sure your hand doesn't cover the operating control completely. This may prevent interference-free reception. If you are not using the stethoset receiver, store it on the transmitter so that the battery can be recharged.
- Page 8 Turning the automatic compression system on Use the COM switch (compression) at the rear of the transmitter to turn the automatic compression system on. This system reproduces soft passages louder and de- creases loud sounds. Choose the setting that suits your listening preferences.
- Page 9 Charging the battery Place the receiver into the transmitter's charging compartment, with the operating control at the front. The left LED on the transmitter must light up. Charge the battery for 24 hours before you use it for the first time. The normal charging time is 4-5 hours.
- Page 10 This system uses infrared light which is emitted by the transmitter and received by the stethoset receiver. Please note that infrared light emitted by other light sources may interfere with the useful signal of the SET 810. If the light path between transmitter and receiver is obstructed by clothing such as scarves etc., the reception may also be disturbed.
- Page 11 WARNING: When people use headphones, they tend to choose a higher volume than with loudspeakers. However, if your hearing has deteriorated and you need to rely on an assitive listening system, please avoid listening at high volume levels for a long time.
- Page 12 Accessories Only use original Sennheiser spare parts and accessories. ATTENTION: Components from other manufacturers (e.g. for power supply or battery) may cause damage to the unit and will invalidate the waranty. The following accessories are available from your authorized dealer:...
- Page 13 A battery has a service life of 1-2 years and should be replaced if the operating time decreases. Sennheiser batteries can be recycled. Please dispose of the battery as special waste or return them to your specialist dealer. To protect the environment, only dispose of totally exhausted accupacks which cannot be recharged.
- Page 14 RI 810 additional stethoset receiver One transmitter can transmit to several receivers. Additional RI 810 receivers are available from your authorized dealer. RI 810 S clip-on receiver Instead of earbows, this receiver features a socket for connecting a headphone or a connecting cable which allows its use with a hearing aid.
- Page 15 If problems occur... - Are all jack plugs connected correctly? - Are the receiver and sound source turned on and is the volume of the receiver and sound source sufficient? - Have you pulled the earbows apart? - Is the battery inserted properly into the receiver? - Have you charged the battery for at least 20 minutes? - Are the transmitter's LEDs pointed at the receiver? - Is the receiver's operating control pointed at the transmitter?
- Page 16 Additional information for hearing aid acousticians Adjusting the earbow pressure Loosen the screw at the rear of the stethoset receiver. Move the screw in the long hole to the desired position (continuously adjustable). 1 = Low earbow pressure 2 = High earbow pressure Tighten the screw.
- Page 17 Adjusting the max. volume: Potentiometer turned fully counterclockwise Potentiometer turned fully clockwise Adjusting the bass response: Potentiometer turned fully counterclockwise Potentiometer turned fully clockwise The adjustments can also be made when the receiver is being used. When replacing the operating control, make sure the "projections"...
- Page 18 3.5 mm jack, stereo/mono 2.5 mm jack, mono approx. 4 h approx. 10-12 h 24 V DC via NT 810 mains unit approx. 94 g (without battery) diameter: 3.8 inch, heigth: 1.1 inch > 125 dB 2.4 V via BA 151 battery more than 4 hours per battery approx.
-
Page 19: Manufacturer Declarations
Before putting the device into operation, please observe the respective country-specific regulations! WEEE Declaration Your Sennheiser product was developed and manufactured with highquality materials and compon- ents which can be recycled and/or reused. This symbol indicates that electrical and electronic equip- ment must be disposed of separately from normal waste at the end of its operational lifetime. - Page 20 Sennheiser electronic GmbH & Co.KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ. 04/07 093286 / A04...