Page 1
Oahu Showerspa Model #1035 Owner's Manual...
Page 2
Oahu ShowerSpa Model #1035 Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instruc- tions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Page 4
Parts Legend 1. ShowerSpa 7. Hand Shower Outlet 13. Bolt ........4 2. Showerhead 8. Cover 14. Mount Bracket ....2 3. Hand Shower 9. Allen Wrench 15. Mounting Screw ...12 4. Shower Hose 10. Nut ........4 16. Nylon Anchor ....12 5. Hand Shower Holder 11.
Page 5
Assembly After Unpacking Your ShowerSpa, Some Assembly Is Required Prior To Installation Hand Shower Holder Assembly Figure A 1. Place the threaded end (on main axis) of the hand shower holder (5) into the hand shower outlet (7). Make certain the threads for the hand shower hose are pointing down.
Retrofit – Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE Show- erSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
Body Jets The Oahu ShowerSpa is equipped with two small body jets and two large body jets. Each pair has a separate diverter knob controlling the body jets. The first knob operates the two large jets, while the other knob controls the two small jets.
In no event This warranty does not cover, and PULSE ShowerSpas will not pay for shall the liability of PULSE ShowerSpas, Inc. exceed the purchase price any conditions, malfunctions or damages resulting from (1) normal of the ShowerSpa.