Advertisement
Quick Links
30
20
Assembly Instructions
1 Drill out holes on the Table Top, Seats, Stands and Braces with a 7/16" dia. drill.
2 Attach the Stands to the Table Top loosely using the 3/8" x 1-1/2" SS Bolts. (See photo above
right)
3 Attach the Seats to the Stands loosely using the 3/8" x 1-1/2" SS Bolts.
4 Attach Braces to the Stands and Table Top loosely using the 3/8" x 1-1/2" SS Bolts. (See photo
above right)
5 Tighten all bolts.
96
22
51 7 8
Part
No.
642-A15
8' Champion Accessible Top
622-013
634-010
Free Standing Table Stand
634-013A
Table Brace w/Umbrella Hole
3/8" X 1-1/2" SS Hex Bolt
516-058
516-028
516-023
In Accordance to California law: WARNING This product contains a chemical know to the
State of California to cause cancer and birth defects or other reproductive harm.
Periodic check of bolt tightness recommended.
950-501
950-501 8FT CHAMPION
FREESTANDING TABLE
ACCESSIBLE
1
42
2
68 3 16
Description
6' Champion Seat/Back
3/8" SS Nylock Nut
3/8" SS Flat Washer
•
Attach both legs to the inside of table
support bar
•
Attach the straight end of each brace to
the table.
•
Attach bent end of both braces to the
cross bar of each leg.
Qty.
1
2
2
2
16
16
32
Advertisement
Related Manuals for PREMIER POLYSTEEL 950-501
Summary of Contents for PREMIER POLYSTEEL 950-501
- Page 1 950-501 950-501 8FT CHAMPION FREESTANDING TABLE • Attach both legs to the inside of table ACCESSIBLE support bar • Attach the straight end of each brace to the table. • Attach bent end of both braces to the cross bar of each leg.
- Page 2 8' Champion Accessible Perforated Metal Table, Free Standing 950-5P1 72" 10" 30" 62 1/2" 96" 31" 20" 69" SIZE X.01 REV. SHEET 1 OF 2...
- Page 3 8' Champion Accessible Perforated Metal Table, Free Standing 950-5P1 Assembly Instructions 1. Drill out holes. 2. Attach both legs to the inside of table support bar. (See view above) 3. Attach the seats to the legs. 4. Attach the straight end of each brace to the table. (See view above) 5.
- Page 4 950-502 Part No. Description Qty. 642-A15 Champion Accessible Table Top 8’ 622-013 Champion Seat/Back 6’ 632-200 Table Pedestal Direct Bury 516-058 3/8” X 1-1/2” SS Hex Bolt 516-028 3/8” SS Nylock Nut 516-023 3/8” SS Flat Washer Drill 2 holes in ground per the above drawing. Place the pedestals in the holes.
- Page 5 8' Accessible Multi-Pedestal Surface Mount 950-505 10" 62 1/2" 30" 6 1/4" 72" 96" 31" 19 1/2" Drill plastic out of the mounting holes on the pedestals, top and seats using a 7/16” dia. drill bit. Fasten the table top and seats to the pedestals, installing the pedestal on the inside of the table and seat mounting bar.
- Page 6 8' Accessible Multi-Pedestal Surface Mount 950-505 ITEM NO. PART NUMBER DESCRIPTION QTY. 642-A15 8' Accessible Table Top Expanded 622-013 Champion Seat/Back 6' 633-131 Table Pedestal Stand (Surface Mount) 633-141 Seat Pedestal Stand (Surface Mount) 516-058 3/8"x1-1/2" SS Hex Bolt 516-028 3/8"...
- Page 7 927-101 16 1/8" 40" 73 1/2" 76" 30" 20" SIZE X.01 REV. SHEET 1 OF 2...
- Page 8 927-101 In Accordance to California law: WARNING This product contains a chemical know to the State of California to cause cancer and birth defects or other reproductive harm. 1. With table top upside down bolt 2 opposing legs on to top. Do not tighten the bolts now. 2.