Download Print this page

SECO-LARM Enforcer EVT-PB1-V1TSQ Specification Sheet

Passive video baluns

Advertisement

Quick Links

Passive Video Baluns
EVT-PB1Q
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
The fast, easy, and low-cost way to connect a CCTV camera
to a monitor, multiplexer, or video recorder.
All SECO-LARM passive video baluns transmit the video
signal of a single CCTV camera long distances over low-cost
CAT 5 unshielded twisted pair (UTP) cable.
The EVT-PB1-V1TSQ features a built-in transient surge
protection circuit to help protect sensitive video security
equipment from power spikes.
The EVT-PBP-V1TQ features a 6-inch BNC pigtail connector
for easy connections in tight spaces.
Transmits a monochrome video signal up to 2,000 feet
(610m) or color up to 1,300 feet (400m).
Passive operation - No external power required.
Uses low-cost CAT 5 cable instead of costly coaxial cables.
High immunity from interference - Built-in impedance
coupled device and noise filter.
Gold-plated BNC connector for reliability and longer life.
Small size for easy installation.
Typical Installation:
Color - 1,300' (400m)
B/W - 2,000' (610m)
Camera
Bullet Cam
Dome Cam
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
Quick-connect screwless terminal Block
6-Inch BNC pigtail connector
Surge protection
CAT 5
CAT 5
CAT 5
CAT 5
CAT 5
CAT 5
Mount multiple baluns behind
multiplexor without pigtails.
1.949.261.2999 (CA & Int'l)
Email: info@seco-larm.com
Crimping
Power
RJ-45
Tools
EVT-PB1Q
2-7/16" x 3/4" x 5/8"
(61 x 19 x 15.5 mm)
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
2-1/4" x 19/32" x 19/32"
(57 x 15.4 x 15.4 mm)
1.800.662.0800
Fax: 1.949.261.7326
Website: www.seco-larm.com
Long
Compact
Range
Size
Quick-connect screwless
terminal block - No need to
waste time crimping RJ-45
connectors.
6-Inch BNC pigtail connector.
Screw terminals for reliable
installation.
2" x 19/32" x 19/32"
(50 x 15.4 x 15.4 mm)
Screw terminals for reliable
installation.
Surge protection.
®
PassiveVideoBalunsd.cdr

Advertisement

loading

Summary of Contents for SECO-LARM Enforcer EVT-PB1-V1TSQ

  • Page 1 All SECO-LARM passive video baluns transmit the video signal of a single CCTV camera long distances over low-cost CAT 5 unshielded twisted pair (UTP) cable. The EVT-PB1-V1TSQ features a built-in transient surge protection circuit to help protect sensitive video security equipment from power spikes.
  • Page 2: Technical Specifications

    Common Mode Rejection Impedance: Coax, Male BNC Terminal Block Power Temperature Range Humidity Range Wire Type Wire Category Case Surge Suppression (EVT-PB1-V1TSQ): Built-in Transient Voltage Surge Suppressors Reverse Stand-Off Breakdown Breakdown Voltage Vrwm(V) Voltage Vbr (V) Voltage Vbr (V) MIN.@1T 8.55...

This manual is also suitable for:

Enforcer evt-pbp-v1tqEnforcer evt-pb1q