SECO-LARM Enforcer EV-1006-N4SQ Manual

ENFORCER CCD IR Day/Night Camera Manual
TROUBLE SHOOTING
The screen is blank
Check that the camera is powered up.
Check that the power supply's polarity is correct.
Check that the monitor is powered up.
Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim Clean the lens (using a soft, clean cloth).
Check that the light source is adequate.
The screen image has poor contrast
Adjust the monitor's contrast knob.
Change the position of the camera.
The screen image flickers Change the position of the camera.
The screen image is distorted Change the position of the camera.
The camera case is hot Check that the correct power supply is in use.
IR LEDs do not turn on Check that the correct power supply is in use.
IMPORTANT
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local
laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held
responsible for the use of this product in violation of any current laws or statutes.
WARNING
Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or electric shock. Do not
open the case of this device, as there are no field-serviceable components inside.
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WARRANTY
ENFORCER IR Cameras are warranted against defects in material and workmanship while used in normal service
for a period of one (1) year from the date of sale to the original customer. Our obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation pre-paid, to SECO-LARM.
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM
policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change
specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2008 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole
or in part, without the written permission of SECO-LARM.
®
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Website: www.seco-larm.com
®
E-mail: sales@seco-larm.com
IMU_EV-1006-N4xQ.PMD
1/3" Sony CCD Color IR Day/Night Cameras
4.3mm Lens, 78
EV-1006-N4WQ - - White Case
Weatherproof
PITMW2
MANUAL
o
Viewing Angle, up to 60' IR Range
EV-1006-N4BQ - - Black Case
EV-1006-N4SQ - - Silver Case
®