Advertisement
CARE
AND CLEANING
OF YOUR
WATER
PURIFIER
continued from page 4
carbon bags when you begin to get unwanted odor.
The filters will last 2-3 months if the Purifier is used
every day. They will last longer if you don't make
purified water that often. Get new carbon bags from
Sears, Stock No. 42-34541.
TO REPLACE
...Remove the cover from the tank.
...Remove the carbon filter housing (push IN and pull
DOWN) from the cover spout.
...Remove the used carbon bags and throw away.
Rinse the inside of the housing with water.
...Push new carbon bags down intothe housing as far
as they will go (see step 7 on page 3).
...Replace the housing onto the cover spout, and
replace the cover on the tank.
The next time you make purified water, discard the
first 2 or 3 cupfuls which may have small, harmless,
carbon fines in it.
Cover...,.!
//
Carbon
Filter
Housing
Carbon Bag (2)
NOTE:
The
physiological
effects
of the
operation
of this appliance,
beneficial
or
otherwise,
have not been investigated
by Underwriters
Laboratories.
See Product Data
Sheet for test data obtained
from an independent
laboratory.
1.
NOT MAKING ANY
PURIFIED WATER
Purifier power cord
not plugged into
electrical outlet.
2. No power to electrical
outlet.
,
°
Cover cord not
plugged into Purifier
base receptacle.
Did not press reset
button to start cycle.
5. Did not fill the tank
with tap water.
PROBLEM
CHECK LIST
NOT MAKING ENOUGH
PURIFIED WATER
EACH BATCH
1. Cover cord not
plugged into Purifier
base receptacle.
2. Did not fill tank with
water to max. fill line.
3. Purifier cover gasket
not sealing tightly on
tank (be sure gasket
is down, all the way
around, against
bottom lip on cover -
see Key No.
4,
page 6).
4. Storage bottle not
placed directly under
spout.
STEAM COMING
FROM SPOUT
1. Cover cord not
plugged into Purifier
base receptacle.
WATER LEAKS
FROM SPOUT
1. Carbon bags not
pushed fully down into
spout.
2. Spout not properly
fastened to cover.
Advertisement
