Advertisement
Quick Links
!
I
e
STAR'I"
CONTROL
OPERATINGSTATUS
SYMBOLS
_Jl
LINT SCREEN
B
SAFETY DOOR
SWITCH
1_
ERFORMANCE
GUIDE LABEL
_DEL
NO. PLATE
m
m
m
If you need SERVICE or PARTS for your Kenmore dryer:
Be ready to give your Sears Service Department the model number, serial number and date of
purchase. Write in below. The plate i¢1 with model and serial numbers is located behind the
dryerdoor.
iii
,.1tO.
[ M
MODEL NO.
SERIAL NO.
I
DATE OF PURCHASE
ELECTRIC
MODEL
64291
GAS
MODEL 74291
Advertisement
Related Manuals for Sears Kenmore Advantage 64291
Summary of Contents for Sears Kenmore Advantage 64291
- Page 1 If you need SERVICE or PARTS for your Kenmore dryer: Be ready to give your Sears Service Department the model number, serial number and date of purchase. Write in below. The plate i¢1 with model and serial numbers is located behind the dryerdoor.
- Page 2 How to dry a load of laundry b/_ Clean lint screen before each load. Put laundry into dryer and shut the door. Ill Cycle Selector Control Use this control to select the proper drying method for the type of items in the load. The control can be set for Timed Drying or Air. You can turn the control at any time to make drying time longer or shorter or you can turn the control to an OFF position to shut the dryer off.
- Page 3 Ill CYCLi_ SELECTOR CONTROL NORMAL Cycle Use this cycle to get up to 120 minutes of drying time at high heat followed by a 5 minute (approx.) cooldown. • Set the Cycle Selector Control to the amount of time you want in the Normal Cycle.
- Page 4 E1 Lint Screen Keep the lint screen clean. A lint-clogged screen will slow down the flow of air. This makes drying time longer and wastes energy. Clean the lint screen before each load as follows: !. With dryer off, remove the screen by pulling straight up. 2.