Download Print this page
Viking LRR-4 Product Manual
Viking LRR-4 Product Manual

Viking LRR-4 Product Manual

Long range 4 channel receivers / transmitters

Advertisement

Quick Links

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Long Range 433 MHz Four Channel Transmitters
and Receivers with up to 400 ft* Range
Viking's model LRR-4 Long Range 4 Channel Receivers with
integrated receive antenna and LRT-4 Long Range Wireless 4
Channel Radio Transmitters comprise Vikings high frequency, long-
range (RFID) identification solution. Intended for security access
control applications, the LRT-4's wireless communication is based
upon a secure, digital, anti-playback routine. The LRT-4
Transmitters have four buttons, each corresponding to its own
Wiegand output on the LRR-4 Receiver. Each Transmitter includes
an integrated red LED, used to indicate both positive button press
and battery strength. They are also equipped standard with a
125 KHz HID** compatible potted proximity module allowing the
Transmitter to also be used as a close range access credential.
The transmitters and receivers operate at 433 MHz allowing a
transmission range of up to 400 ft (line of sight). The LRR-4 receiver
has an adjustable read range, optional external antenna connector,
terminal block with 4 channel Wiegand data output and a transducer
and LED to confirm transmitter button press. The LRR-4 has a
conformal coated circuit board mounted in a NEMA 4, 4x rated box
for use in outdoor applications.
Features
LRT-4 Long Range Transmitter
• Read range of up to 400 ft (line of sight)
• Convenient key fob design
• 4 buttons to activate up to 4 different Wiegand devices
• Secure, Rolling Code + Encryption, digital, anti-playback wireless
transmission
• Integrated 125 KHz proximity module for close range access credential
(can be used with Viking Proximity card readers and certain 125 KHz HID** readers)
• Replaceable CR2032 battery lasts up to 500,000 button presses
• Robust buttons rated for up to 1 million activations
• LED to indicate button press and battery strength
• Internal diaphragm / gasket seals circuit board from moisture and debris
• CE mark
LRR-4 Long Range Receiver
• Read range of up to 400 ft (line of sight)
• Secure, digital, anti-playback wireless communications
• 4 channels of 26 bit Wiegand data output
• Optional external antenna connector
• LED and transducer transmitter feedback
• Adjustable read range
• Removable terminal block for easy wiring
• Cable grommet included for sealing cable exit
• CE mark
*Up to 400ft line of sight range
** HID and the HID logo are registered trademarks of HID Global Corporation, an ASSA
ABLOY company. All other trademarks are the property of their respective owners.
www.vikingelectronics.com
Information: (715) 386-8861
PRODUCT MANUAL
ATTENTION: When ordering LRT-4 Transmitters, quantity,
Facility Code, starting Transmitter, and Proximity Module
Number must be specified. Please use the attached order
form on page 4.
Use with the following Viking models to remotely activate
relays for door/gate control, etc:
Shipping Weight: LRR-4 = 0.81 lb
(see page 2 for complete specifications)
LRR-4
Applications
Model
Description
AES-2000
Accessible Entry System (with ES-3 controller)
AES-2005
Accessible Video Entry System (with ES-3 controller)
C-4000
Apartment / Office Entry Controller
ES-1
Stand Alone Keyless Entry System
ES-3
Entry System Controller (requires power adapter)
K-1200-IP
VoIP 12 Button Apartment Entry Phone
K-1205-IP
VoIP Apartment Entry Phone with Camera
K-1270-IP
VoIP Entry Phone with Card Reader
K-1275-IP
VoIP Entry Phone with Camera and Card Reader
K-1700-IP
VoIP Entry Phone with Keypad
K-1705-IP
VoIP Entry Phone with Keypad and Camera
K-1770-IP
VoIP Entry Phone with Keypad and Card Reader
K-1775-IP
VoIP Entry Phone with Keypad, Camera, and Card Reader
K-1770-3
Entry Phone with Keypad and Card Reader
K-1775-3
Entry Phone with Keypad, Camera, and Card Reader
K-1900-8-IP
VoIP Entry Phone with Handset and Keypad
Specifications
LRT-4 = 0.1 lb
LRR-4 / LRT-4
Long Range 4 Channel
Receivers / Transmitters
September 18, 2018
SOLD
SEPARATELY
LRT-4
DOD
202
204
164
193
195
271
272
273
274
253
254
257
258
275
280
361

Advertisement

loading

Summary of Contents for Viking LRR-4

  • Page 1 Transmitter to also be used as a close range access credential. The transmitters and receivers operate at 433 MHz allowing a transmission range of up to 400 ft (line of sight). The LRR-4 receiver has an adjustable read range, optional external antenna connector,...
  • Page 2 4. the access panel. A linear power supply is recommended for best operation. Power Supply is not included, but can be powered directly from Viking model ES-1, Enrollment K-1700-IP, C-4000, AES-2000, and AES-2005 entry systems. When used with an Transmitter must be clicked twice within a Receiver’s read range to be learned...
  • Page 3 Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor.
  • Page 4 715-386-4344 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

This manual is also suitable for:

Lrt-4