Dell PowerConnect W-Series SFP Installation Guide Introduction SFP modules, small form-factor pluggable modules, also known as mini-GBICs, are hot-swappable Gigabit Ethernet optical transceivers. SFP Modules SFP-TX: conforms to 1000Base-T copper wiring Gigabit Ethernet standard SFP-SX: conforms to 1000Base-SX fiber optic Gigabit Ethernet standard SFP-LX: conforms to 1000Base-LX fiber optic Gigabit Ethernet standard Note: Approved optics are tested and supported within their controller/switch systems.
Page 2
2. Slide the SFP module into a 1000Base-X port of the controller/switch until a connection is made and an audible click is heard. 3. Lock the SFP in place by moving the latch on the module to an upright position, facing the top of the module. Dell PowerConnect W-Series SFP | Installation Guide...
Page 3
Proper Disposal of Dell Equipment For the most current information on Global Environmental Compliance and Dell products please refer to the Dell PowerConnect W-Series Safety, Environmental, and Regulatory Information document is included with this product or see our website at www.dell.com.