Connecting Equipment To Your
Acoustic Research Power Conditioner
with Surge Suppression
Power Connections
1. Plug the power conditioner into a grounded outlet.
2. Plug all connected equipment directly into the power conditioner.
Note: Power plugs can be heavy and may cause the conditioner
to tip backwards slightly. If this happens, pull out the extending
arm on the left size of the conditioner's back panel. This arm
stabilizes the unit.
3. Turn on the power conditioner. The LED will illuminate when the unit is
powered on. Your power conditioner provides maximum surge
protection even if the power switch is in the off position.
1
GROUNDED
OUTLET
CAUTION!
DO NOT connect to an ungrounded outlet. DO NOT use with
2-wire extension cords or adapters. This power conditioner is designed
for indoor use only. Install the power conditioner away from heat
emitting appliances such as radiators or heat registers. Do not install
where excessive moisture is present. Do not plug extension cords into
the power conditioner. Never install electrical or telephone wiring during
a lightning storm. DO NOT USE FOR MEDICAL OR OTHER
LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK
ACTIVITIES. DO NOT USE IN DAMP AREAS OR NEAR
WATER RELATED APPLICATIONS SUCH AS
AQUARIUMS, HOT TUBS, ETC.
Power Conditioner
with Surge Suppression
USER GUIDE for PW100/101
2
2
2
2
2
TV
VCR
DVD
RECEIVER
AUDIO EQUIPMENT