Entering System Programming; Default Reset; Programmable System Options - Scytek electronic G-20 User Manual

Vehicle security system
Hide thumbs Also See for G-20:
Table of Contents

Advertisement

Entering System Programming

To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.
· The siren will provide one long chirp, indicating that you have entered Programming.
3. Press the valet switch the number of times equal to the System Parameter you want to change.
· The siren will chirp each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for
that System Parameter.
· The siren will chirp to indicate the setting.
1 chirp
2 chirps
3 chirps
5. When you are finished, turn off the ignition to save the changes.

Default Reset

Following this procedure will set all System Programming Parameters to factory default settings.
1. Enter System Programming.
2. Press Transmitter Button 3.
· The siren will chirp 6 times indicating that the reset signal was received.
· All System Programming parameters are now set to factory default settings.
· The Valet Mode is off.
3. Turn off ignition.

Programmable System Options

Branch
Feature
1. Horn Chirps w/ Arm&Disarm
2. Arm Mode
3. Passive Door Locking
4. Ignition Controlled Locks
5. Door Input Monitoring
6. Auto Rearming
7. Door Unlock Pulse
8. Arming Chirps
9. Extended Parking Lights
10. Disarm with Aux 1
11. Door Lock Pulse Length
12. Anti-Carjack Mode
13. Anti-Carjack Type
14. Ignition Armed Mode
15. Interior Light Mode
16. Interior Light Output (G25)
Page 8 - G25/G20
System Programming
=
Button 1
=
Button 2
=
Button 3
Button 1 (default)
Horn Chirps Disabled
Manual Arming
Disabled
On
10 Seconds
Disabled
Single
Normal
On
Disabled
1 Second
Disabled
Manual
Disabled
Interior Light 30Sec
Interior Light
Button 2
Horn Chirps Enabled Horn Chirps w/Warn
Passive Arming
Enabled
Off
60 Seconds
Enabled
Double
Silent
Off
Enabled
3 Seconds
Enabled
Passive
Enabled
Windows 10Sec
Auxiliary 2
Button 3
Passive w/Countdown
Set Override Code
Lock Only
0.1 Seconds
Full-time
Windows 30Sec
G25/G20 - Page 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

G25

Table of Contents