Sign in today to find solutions:

Don't have an account? Sign up

Schumacher PRO-SERIES PS-1562A User Manual

Schumacher automobile battery charger user manual.

 
1.5 Amp Charger and Maintainer
Fully Automatic – once battery is charged, unit
switches from Full Charge to Float-Mode
Monitoring
Microprocessor Controlled & Auto Voltage
Detection
Automatic Temperature Compensation
Thermal Runaway Protection
Quick-Disconnect Harness
Utilize ring connector and only hook harness
up once
No need to remove battery again to charge
Both the 50-Amp clamp & ring connectors
snap into place in seconds
Reverse-Hookup Protection
LEDs - indicate Charging, Charged and Power
Portable – easy to store
DSR Pro-Series™ Maintainer
Model PS-1562A
Next page ->

Summary of Contents

  • Page 1

    DSR Pro-Series™ Maintainer  1.5 Amp Charger and Maintainer  Fully Automatic – once battery is charged, unit switches from Full Charge to Float-Mode Monitoring  Microprocessor Controlled & Auto Voltage Detection  Automatic Temperature Compensation  Thermal Runaway Protection ...

  • Page 2

    DSR Pro-Series™ Mountable Maintainer  1.5-AMP Trickle Charge Rate - charges in 2 to 12 hours Fully Automatic – once battery is charged, unit  switches from Full Charge to Float-Mode Monitoring  LED Lights - indicate Power On and Charged ...

  • Page 3

    DSR Pro-Series™ Metal Hand-Held Battery Charger Model PS-620 6-Amp Medium Charge – ideal for most  everyday needs, charges most batteries in 6 to 8 hours  2-Amp Trickle Charge – charges a small 12 volt battery in 2 to 12 hours ...

  • Page 4

    DSR Pro-Series™ Metal Battery Charger/Starter Model PS-1025  50-Amp Engine Start – for emergency starting  10-Amp Fast Charge – good for everyday charging needs. Charges in 3 to 5 hours  2-Amp Trickle Charge – charges a small 12 volt battery in 2 to 12 hours ...

  • Page 5

    DSR Pro-Series™ Specialty Hand-Held Battery Charger       Model PSC-2030T    200-Amp 12V Engine Start – for emergency starting 30-Amp 6V & 12V Charge – for very fast charging - charges in 1 to 3 hours 10-Amp 12V Fast Charge –...

  • Page 6

    DSR Pro-Series™ Hybrid Hand-Held Battery Charger/Starter  125-Amp Engine Start – for quick starting  15<>40-Amp Fast Charge  2-Amp Slow Charge – for charging small batteries, warming large ones  Fully Automatic Float-Mode Monitoring – keeps battery at optimum ...

  • Page 7

    DSR Pro-Series Wheel-Style Battery Charger/Starter  200-Amp Engine Start – for emergency starting  35-Amp Rapid Charge – charges in 1 to 3 hours  2-Amp Trickle Charge – charges a small 12V battery in 2 to 12 hours  Manual Operation ...

  • Page 8

    DSR Pro-Series™ Heavy-Duty Wheel-Style Battery Charger/Starter  Manual Operation  135 Minute Timer with “Hold” Position – for precise control of the charge duration, charger shuts off after timer expires  Extra Long 9-Foot Power Cord– 120V line cord for extended reach 6 ft, 4 ga, TPE Welding Grade Battery Cables –...

  • Page 9

    DSR Pro-Series™ Heavy-Duty Wheel-Style Battery Charger/Starter Model PSW-22  225-Amp 12V/125-Amp 6V Engine Start – for emergency starting  40-Amp 12V/6V Fast Charge – charges a battery in 1 to 3 hours  20-Amp 12V Medium Charge – charges a battery in 1 to 3 hours ...

  • Page 10

    DSR Pro-Series™ Battery/Charging System Analyzer • 100 Amp Digital Battery Tester • Microprocessor Controlled • CCA Range 200-1200 • Operating voltage range 8 to 16V • An easy-to-read digital display & user prompts to ensure simple & accurate operation • Field proven, high quality design for long life •...

  • Page 11

    DSR Pro-Series™ Battery/Charging System Analyzer  200 Amp Digital Battery Load Tester  Microprocessor Control – makes for an easy and accurate load test with no need to time yourself  Bright, LED Digital Display – indicates both voltage and test results ...

  • Page 12

    DSR Pro-Series™ Carbon Pile Battery/Charging System/Starter Analyzer  500-Amp Variable Load Carbon Pile Tester – for 12V batteries, alternators, regulators and starters  Separate Voltmeter and Ammeter – provides easy-to-monitor battery load tests  Color-Coded, Temperature Compensation Pass/Fail Bands on Voltmeter – insures precise battery load test results ...

  • Page 13

    Pro-Series™ Electronic Battery Bus Bar for Parallel Charging  Charges multiple battery systems at the same time when hooked up to a battery charger  Enables simultaneous recharging of up to 6 batteries  Built-in test circuit and LED verify proper connection and polarity ...

  • Page 14

    DSR Pro-Series™ Jump Starter  1800 Peak Amps  280 Cranking Amps  225 Cold Cranking Amps  18 Ah Professional-Grade, High-Output AGM Battery  Built-in, Automatic Charger  Two-Function Digital Display  12-Volt DC Power Outlet  4-Gauge, 28-Inch Cables ...

  • Page 15

    DSR Pro-Series™ Heavy Duty Jump Starters Model PSJ-2212  2200 Peak Amps  330 Cranking Amps  275 Cold Cranking Amps  4-Gauge, 50-Inch Cables  22 Ah Professional-Grade, High-Output AGM Battery  3-Amp Built-in, Automatic Charger  ON/OFF Switch ...

  • Page 16

    DSR Pro-Series        Model PSI-1500   3000-Watt Peak Power DC to AC Power Inverters & Accessories Two 120V GFCI Outlets – with built-in circuit breaker and reset switch Two Built-In, High-Speed Cooling Fans – helps keep the unit cool for consistent operation Low Battery Alarm –...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: