Cylinder Cams - Schlage L-SERIES Brochure & Specs

L
S E R I E S
IC Installation Tool
This tool is used to install and remove mortise cylinder housings
and test mortise cylinder cam action for both small format and
full size interchangeable core cylinders. Its other ends are
designed to install the driver and retainer for full size IC in
AL-Series, D-Series and other Schlage cylindrical locksets.
M504-413 (Order as needed)
Mortise Cylinder Cams
L400 and L9000 Series
Except L9060 Outside
L9060 Outside Only
Cam Screws
B502-942 Everest and Primus (non-IC)
B502-468 Classic conventional (non-IC)
L583-333 All full size interchangeable core
B520-484 All small format interchangeable core
18
L583-254
L583-153 L583-255
Everest & Classic All IC
Primus Conventional
B502-191
B502-948 K510-680
Classic
Everest & All IC
Conventional
Primus