Specifications - Schlage B-Series Manual

Specifications

Handing:
B250-Series deadlatches are reversible. All other B-Series
locksets are non-handed.
Door Thickness:
BC100-Series, 5-pin: 1 ˝ to 1 ˝ thick (35mm to 44mm)
standard. Available to 2 ˝ (57mm), assembled to order.
B250-Series, 5-pin: 1 ˝ to 1 ˝ (35mm to 44mm) standard.
Available to 2 ˝ (57mm), assembled to order.
B600/700/800-Series: 1 ˝ to 2" (44mm to 51mm) standard.
Available for 1 ˝ (35mm) and doors up to 2 ˝ (63mm),
assembled to order. Door ranges may vary by function.
Backset:
BC100-Series: Adjustable for 2 ˝ (60mm) or 2 ˝ (70mm)
standard.
B250-Series: 2 ˝ (60mm) standard. 2 ˝ (70mm) optional.
B600/700/800-Series: 2 ˝ (70mm) standard, 2 ˝ (60mm),
3 ˝ (95mm), 5" (127mm) optional.
Front:
Brass, bronze or stainless steel. 1 ˝ x 2 ˝ (29 mm x
57mm) square corner, beveled. See page 12 for options.
Dead Bolt:
1" (25 mm) throw with saw-resistant hardened steel insert.
Latch Bolt:
Brass, ˝ (14mm) throw, deadlocking on keyed and exte-
rior functions.
Exposed Trim:
Wrought brass, bronze or stainless steel.
Thumbturn: Pressure cast zinc, plated to match finish
symbols.
Strike:
1 ˝ x 2 ˝ (32mm x 70mm) with steel reinforcer and two
3" screws to resist kick-in attacks standard.
Optional strikes, lip lengths and ANSI strike box avail-
able. See page 13.
Cylinder & Keys:
Commercial: 6-pin patented Everest C123 keyway stan-
dard with two nickel silver keys per lock.
Residential: 6-pin C keyway, keyed 5-pin.
Keying Options:
Interchangeable core and Primus
Master keying, grand master keying and construction key-
ing.
Warranty:
Commercial: Three-year limited.
Residential: Full mechanical lifetime.
® high security cylinders.
Certifications
ANSI:
BC100 and B250-Series meet or exceed A156.5 Grade 2
strength and operational requirements.
B600/700/800-Series meets or exceeds A156.5 Grade 1
strength and operational requirements.
UL / cUL:
B600/700/800-Series locks are UL10B listed auxiliary
locks for A label single doors, 4´ x 8´.
UL10B Listing optional for BC100-Series as auxiliary
locks. Letter F and UL symbol on latch front indicate
listing.
UL437 Listed locking cylinder optional: Specify Primus
20-500 Series cylinder for BC100 and B250-Series Grade
2 products, or specify B800-Series Grade 1 products.
BC160 Deadlock 605
B250 IC Deadlatch 626
B660 Deadlock 625
B
S E R I E S
3