Width: 88mm Length: 88mm Height: 54mm Compatible Equipment Tx1000 series base units/keyboards, RS232 serial extension of BBV compatible equipment. Most 3 wire RS232 links can be extended. Temperature range -10°C to +40°C TxLD Keyboard Line Driver Installation Handbook Rev-02 Page...
Page 3
Slave Keyboard. • Line Length The TxLD will perform optimally over any length of cable up to 1km using the recommended cable type “BELDEN 9502”. Cables are easily connected to the “WAGO” connectors on the PCB.
Page 4
TXLD(K) PCB. Connect the Slave Keyboard power supply to the power entry on the TXLD(K), plug in the Slave Keyboard. The keyboard will not need a separate power supply as it is now powered through the serial lead.