Hex Dump Mode - SATO CL608e Operator's Manual

HEX DUMP MODE

In addition to the Test Print Labels, the printer can print the contents of the receive
buffer in a hexadecimal format to allow the data stream to be examined for errors
and troubleshooting.
ONLINE
SATO CL Series "e" Printers
The Hex Dump Mode is entered by placing DSW2-4 in the on
position and powering the printer on.
QTY:000000
1. The printer is now ready to receive data.
2. Send the data stream to the printer.
3. The received data will be printed in a hexadecimal format
4. To return the printer to normal operation, place DSW2-4 in
the off position and power the printer off and then back on.
PN 9001074 Rev. B
Section 3. Configuration
Page 3-25