I Preparation For Use; Turn On The Unit For The First Time; To Add/Delete Channels; Clock Setup - Sanyo DVW-7200 Instruction Manual

Preparation for Use
Turn On the Unit for the
First Time
VCR
Press first.
VCR VCR
1
1
Turn on the TV and
set it to channel 3.
• If channel 3 is already occupied for broadcasting,
see "RF Output Channel" section.
2
2
Remote Control
POWER
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
or
3
3
AUTO SET UP
Do you connect the cable from the cable box or
the satellite box to the unit's ANT-IN jack?
YES
Y es
Y es
Press [MENU]
to exit.
• Refer to "Hints for Cable Box or
Satellite Box" section on page 6.
No
No
Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized
in this unit by using [SKIP/CH. G
(or [CHANNEL K K /L L ]).
• If "AUTO SET UP" appears on the TV
screen again, check the cable connections.
Then, press [B] once again.
Hint
Hint
• Repeat these steps only if either there
was a power failure or this unit has been
unplugged for more than 30 seconds.
TIP:
If you change the on-screen language at
step 2), change the language for DVD func-
tion in "PLAYER MENU" setting. (Refer to
page 20.)
To Select a Channel
You can select a channel by using
the Number buttons or
[ ] on the remote
SKIP/CH. G G /K K H H /L L
control.
Notes for using the Number buttons:
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press [1], [1], [7])
• You must precede single-digit channel
numbers with a zero (for example: 02,
03, 04 and so on).

To Add/Delete Channels

1
1
MENU
or
TV Screen
2
2
[ON]
or
CH 01
3
3
or
4
4
NO
or
G /K K H H /L L ]
5
5
To exit the
menu
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Press [K K ] or [L L ] to select "CHANNEL SET
UP", then press [B].
3) Press [K K ] or [L L ] to select "AUTO SET
UP", then press [B]. After scanning, the
tuner stops on the lowest memorized
channel.
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Press [K K ] or [L L ] to select "LANGUAGE
SELECT", then press [B].
3) Press [K K ] or [L L ] to select "ENGLISH",
"FRANCAIS" or "ESPAÑOL", then press
[CLEAR/C.RESET].
Hint
Hint
• If you accidentally select Spanish or
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
• If the clock is not set, the
CLOCK SET screen
appears when you press
1
[MENU]. In this case, 1
press [MENU] again.
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
2
2
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
Select the channel to
be added or deleted.
3
3
MANUAL SET UP
CHANNEL 30 (CATV)
DELETE
Select "ADD" or "DELETE".
4
4
CLEAR /
C.RESET
5
5
– 9 –
French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELEC-
TION LANGUE. Press [B] and select
ENGLISH. Finally, press
[CLEAR/C.RESET].

Clock Setup

VCR
Press first.
VCR VCR
- M E N U -
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
• If the clock is not set, the
CLOCK SET screen
or
appears when you press
[MENU]. In this case, go
to step 2).
CLOCK SET
MONTH DAY
1 0 / – –
or HOUR MINUTE
– – : – –
Select the current month.
CLOCK SET
MONTH DAY
1 0 / 0 3
or HOUR MINUTE
– – : – –
Select the current day.
CLOCK SET
MONTH DAY
1 0 / 0 3
or
HOUR MINUTE
– – : – –
Select the current year.
CLOCK SET
MONTH DAY
1 0 / 0 3 MON 2 0 0 5
or
HOUR MINUTE
0 5 : – –
Select the current hour.
Continue on next page.
[ON]
YEAR
– – – –
AM/PM
– –
YEAR
– – – –
AM/PM
– –
YEAR
2 0 0 5
AM/PM
– –
YEAR
AM/PM
– –
EN