Auto LCD Off
The Auto LCD Off setting allows you to adjust the
length of time that the LCD screen will remain lit
before turning off to save battery power. 3 options
are available:
• OFF (default)
• 30 SEC
• 1 MIN
Auto Power Off
The Auto Power Off setting allows you to adjust
the length of time after which the camera will power
down when inactive. Use the Up/Down navigation
buttons to select from the menu options. 2 options
are available:
• 5 MIN (default)
• 2 MIN
Video Out
The Video Out setting allows you to adjust the
video output, depending on the type of your TV.
Use the Up/Down navigation buttons to select
from the menu options. 2 options are available:
• NTSC (default)
• PAL
USB Mode
The USB Mode setting allows you to select the
transfer method between your camera and your
PC. 2 options are available:
• PTP (PictBridge Print): When the camera is
connected to a printer by a USB cable which
supports Pictbridge, it can directly print images
stored on the media. For details on PTP
function, please See "PictBridge Print (PTP)" on
page 44.
• MSDC (default): The camera is set up to act as a mass storage device,
allowing only for transfer of files between your camera and PC.
Camera Settings 41
OFF
30 SEC
1 MIN
AUTO LCD OFF
5 MIN
2 MIN
AUTO POWER OFF
NTSC
PAL
VIDEO OUT
PTP
MSDC
USB MODE
The Setup Menu