Theben theLuxa S360 WH User Manual

Motion detector
EN
theLuxa S360 WH
1010510
theLuxa S360 BK
1010511
1. Essential safety instructions
WARNING
Danger of death through electric shock or fire!
 Installation should only be carried out by a pro-
fessional electrician!
•
The device conforms with EN 60669-2-1 when correctly
installed
•
IP 55 in accordance with EN 60529
Designated use
•
Motion detector for automatic lighting control dependent
on presence and brightness
•
Suitable for installation on external walls or ceilings
•
Suitable for entrances, garages, gardens, corridors, parks,
etc.
•
Only intended for installation outside of arm's reach
Disposal
Dispose of the motion detector in an environmentally sound
manner (electronic waste)
2. Description
Motion detector
with sensor head
3 potentiometers
for setting time
(min) and bright-
ness (lux) and
sensitivity (Meter)
3. Connection
WARNING
Danger of death through electric shock!
Disconnect power source!
† †
Cover or shield any adjacent live components.
† †
Ensure device cannot be switched on again!
† †
309699
Check power supply is disconnected!
† †
Earth and bypass!
† †
The device can be manually activated with a circuit breaker.
After releasing the button (return of power) the device swit-
ches on (for at least 40 secs or for the time set on the device).
4. Installation
If applicable, use optional corner bracket (9070902,
† †
9070903) or optional spacer frame (9070906, 9070907) for
flexible installation as well as cable insertion from side or
top/bottom.
230V
Disconnect power source.
† †
1