Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung SCC-C6453N
Summary of Contents for Samsung SCC-C6453N
-
Page 1: User Manual
SCC-C6453N Smart Dome Camera User Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www.samsungsecurity.com 00890A-NA_SCC-C6453N-ENG.indb 1 2009-08-05 오후 3:03:... - Page 2 overview CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or ...
- Page 3 Continued use in such a condition may cause fire or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
- Page 4 overview CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity.
- Page 5 FCC STATEmENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
-
Page 6: Important Safety Instructions
overview ImPORTANT SAFETy INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 7: Table Of Contents
CONTENTS 00890A-NA_SCC-C6453N-ENG.indb 7 OvERvIEW INSTALLATION & CONNECTION SETUP APPENDIx Important Safety Instructions Contents Features What’s Included At a Glance Preparing Installation Installation Initial Setup Connecting With Other Device How to use the Keyboard Controller Main Menu Profile Camera Set Intelligent Video Privacy Zone Preset Auto Set... -
Page 8: Features
overview FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented High performance surveillance camera, equipped with x43 zoom lens and digital zoom IC, enabling monitoring up to 688 times DAY/NIGHT to improve the sensitivity by automatic conversion into the black and ... - Page 9 AT A GLANCE CAmERA HOOK FRAmE SET ALARM IN 00890A-NA_SCC-C6453N-ENG.indb 9 RS-485 POWER INPUT ALARM OUT Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. HOOK LENS English _ 2009-08-05 오후...
-
Page 10: Installation
installation & connection PREPARING INSTALLATION Use the ceiling installation template when you install the camera on the ceiling on your own. Run the cables through the “ ” shaped hole on the center of the template, and remove films on the adhesives, and then attach the template on the desired location on the ceiling. - Page 11 Use the three “SCREWS” to fix the “FRAmE SET” on a “CAmERA” installation position. FRAME SET ADAPTOR Connect external cables to the “CONNECTORS(ALARm IN, POWER, RS-485, ALARm OUT)”and connect the “CONNECTOR” to the “ADAPTOR”. Insert the cable into the “FRAmE SET”, and close the “ADAPTOR”. POWER INPUT ALARM IN 00890A-NA_SCC-C6453N-ENG.indb 11...
- Page 12 installation & connection Connect the “SAFETy WIRE” of the “CAmERA” to the “BRACKET WIRE” on the “FRAmE SET”. Arrange the “22P CONNECTOR” of the “CAmERA” in line with that of the “ADAPTOR”, push the “HOOK” on either end of the “CAmERA” in the “RACK” direction of the “FRAmE SET”...
- Page 13 Arrange the “COvER” arrow in line with the “FRAmE SET” arrow, and push in the “COvER”. Insert the “COvER” to the end, and turn the “COvER” clockwise. As shown in the figure below, turn it until you see the “BUTTON” hole and hear a click.
-
Page 14: Initial Setup
Communication Protocol Setup Use pins #1~#4 of SW603 to specify the communication protocol. Comp 1_ installation & connection 00890A-NA_SCC-C6453N-ENG.indb 14 SW605 SW604 (x10) A : SAMSUNG HALF PIN1 PIN2 PIN3 PIN4 B : SAMSUNG FULL (x1) <Bottom of the camera holder>... -
Page 15: Baud Rate Setup
Baud Rate Setup Use pins #5, #6 of SW603 to set the baud rate. The factory default is 9600 BPS. Setting RS-422A/RS-485 Termination As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest. - Page 16 installation & connection Controller A communication error may occur if you connect multiple cameras that are assigned the same address in the network. 1_ installation & connection 00890A-NA_SCC-C6453N-ENG.indb 16 Termination CAM 1 CAM 2 <RS-422A/RS-485 Full Duplex Organization> n < 32 Termination SW1-ON SW2-ON...
-
Page 17: Connecting With Other Device
CONNECTING WITH OTHER DEvICE ALARM IN ALARM OUT Connecting to a monitor Connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT). Connect the other end of the connector to the Video Input Terminal of the monitor. 00890A-NA_SCC-C6453N-ENG.indb 17 MONITOR BNC Cable... - Page 18 installation & connection To connect ALARm IN Connect one end of the external device's signal line to a corresponding ALARM IN port of the monitor. Connect the other end of the signal line to the earth-grounding [GND] port. To connect ALARm OUT Connect one end of the external device's signal line to a corresponding ALARM OUT port of the monitor.
-
Page 19: Power Supply
Connecting the adaptor cable Power Supply Connect the cables as necessary, and turn on the camera to check if it works properly. Connect the adaptor to the power terminal of the camera. Plug the power cord of the adaptor into the wall outlet. 00890A-NA_SCC-C6453N-ENG.indb 19 Adaptor Board English _1... -
Page 20: How To Use The Keyboard Controller
setup Connect the camera to the keyboard controller or DVR, with which you can manipulate and change the settings of the camera. HOW TO USE THE KEyBOARD CONTROLLER Follow the steps below to set the camera menu using the controller. Open the Camera Setup screen. -
Page 21: Main Menu
mAIN mENU This is the first screen you ever see when you turn on the camera where you can set the camera environment to your needs. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) PROFILE ... -
Page 22: Profile
setup PROFILE You can select one from the pre-determined configurations as appropriate to your specific camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera. STANDARD Automatically optimizes the camera settings to the normal environment. - Page 23 CAmERA SETUP mENU Parent menu Sub-menus DAy/NIGHT WHITE BAL DETAIL 00890A-NA_SCC-C6453N-ENG.indb 23 STANDARD MEDIUM MEDIUM AUTO AUTO NIGHT BURST BURST DAY/NIGHT ATW2 ATW1 mODE BLUE NIGHT BRIGHTNESS Custom Setting MEDIUM mODE ATW2 RED Custom Setting BLUE Custom Setting BACKLIGHT DAy/NIGHT GAmING MEDIUM MEDIUM...
-
Page 24: Camera Set
setup CAmERA SET You can configure the general settings of the camera module. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU> - <CAmERA SET>. The Camera Setup menu appears. Change the settings as necessary, or select an item to check. - Page 25 IRIS The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera. ALC : Adjust the open and close of the iris. - LEVEL : Select an overall brightness level. - BLC : With <BACKLIGHT> set to <BLC>, you can specify the BLC area.
- Page 26 setup As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is not available. As long as FLICKERLESS is set to ON, the AGC mode is not available. mOTION You can specify a level of AGC for controlling the camera motion. This is available only of the SENSE UP menu is set to AUTO.
- Page 27 FLICKERLESS This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter speed will be fixed to 1/100 second. If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is not available.
- Page 28 setup NIGHT DAY DWELL TIME : Time required to determine the filter switch. MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed. This will prevent an error in switching filter, or failure to determine the filter switch in a night scene where a bright spot light source exists.
-
Page 29: White Bal
WHITE BAL If you need to adjust the color according to the ambient illumination, you can use the <WHITE BAL> function. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Illumination is generally referred to as color temperature, which is represented in a measurement of kelvin (K). - Page 30 setup Select <CAmERA SET> - <WHITE BAL>. Select a mode where you set the <WHITE BAL>. DAY : You can set the RED, and BLUE value in DAY mode. The screen will be displayed in colors according to your settings. You can set the R-GAIN, and B-GAIN value only in <AWC>...
-
Page 31: Focus Mode
FOCUS mODE You can select a focus mode according to the angle that you adjusted for camera recording. - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in <mF>. - Page 32 setup v-SyNC You can set the V-SYNC mode. - If you select <INT>, the camera will use the internal synchronization. - If selecting <LINE>, the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate. AGC COLOR SUP You can adjust the color reproduction range according to AGC.
-
Page 33: Intelligent Video
INTELLIGENT vIDEO You can enable the motion detection and tracking functions. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<INTELLIGENCE>. Select each item and set appropriately. mOTION You can enable the motion detection and tracking functions. -
Page 34: Privacy Zone
setup DISPLAy When selected <ON>, it displays the motion detected and detection of configured advanced function. SENSITIvITy Sets the sensitivity of motion sensor. RESOLUTION The bigger the resolution setting, the smaller the object that can be detected. ALARm OUT When selected <ON>, it outputs alarm signal when the motion is detected and on a detection of configured advanced function. -
Page 35: Preset
Select the <PIxEL LEvEL>. Select the pixel level for the SIZE and LOCATION settings. Select the <SIZE> and press [ENTER]. Using the joystick, set the size of the privacy zone. Select the <LOCATION> and press [ENTER]. Using the joystick, set the position of the privacy zone. - Page 36 setup Select the preset number. Select <POSITION> and adjust <PAN/ TILT/ZOOm> to the desired setup using the joystick. Set <PRESET ID> to <ON> and enter the name. For entering the name, refer to “CAMERA ID”. (page 24) Select <PRESET SPEED> and adjust the pan/tilt speed of the preset.
-
Page 37: Auto Set
AUTO SET You can set the AUTO PAN, PATTERN, and AUTO PLAY. Auto Pan Setup Set the starting and ending positions to patrol between points at specified speed. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<AUTO SET>. - Page 38 setup Select each item and set appropriately. POSITION : Set the starting and ending positions for the <AUTO PAN>. Move to the setting screen and adjust pan/tilt to the desired starting position, and then press [ENTER]. Again, adjust pan/tilt to the desired ending position and press [ENTER] to finish <AUTO PAN>...
-
Page 39: Pattern Setup
Pattern Setup You can manually record your pan/tilt/zoom movements to a monitoring pattern for up to 2 minutes. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<AUTO SET>. Select the pattern number. PATTERN setup screen appears. -
Page 40: Auto Play Setup
setup Auto Play Setup AUTO PLAY runs configured AUTO PAN, PATTERN, and SCAN functions automatically. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<AUTO SET>. Select the <AUTO PLAy> and select a number. -
Page 41: Zone Set
ZONE SET You can set the north direction and the zone coverage. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<ZONE SET>. Set <AZImUTH> to <ON>. Set the north direction using the joystick and press [ENTER]. -
Page 42: Alarm Set
setup ALARm SET It provides 8 alarm inputs and 3 alarm outputs. Detects alarm inputs from the external sensors cooperating with configured presets, patterns, and scan functions, and produces alarm outputs. Alarm’s dwell time is defined by the corresponding preset’s <DWELL TImE>... - Page 43 ALARM IN SET : Select the alarm sensor operation between <NO>, <NC> and <OFF>. ALARM OUT SET : Set the alarm out port matched to the alarm input port. AUTO SET : Sets the pattern and scan action for the corresponding alarm input.
-
Page 44: Clock Set
setup CLOCK SET Sets whether to display the clock on the screen and its time format. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<CLOCK SET>. Select <DISPLAy> and set whether to display the time on the screen. -
Page 45: Factory Defaults
FACTORy DEFAULTS When selected, the <FACTORy DEFAULTS> screen appears and you can reset all settings to the factory default settings by selecting the <OK>. However, the protocol, baud rate, address and the language settings will not be reset. OSD COLOR Selects the color of the on-screen display font. -
Page 46: Communication
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<SySTEm INFO>. The current system information is displayed. _ setup 00890A-NA_SCC-C6453N-ENG.indb 46 COMMUNICATION RS485 PRIORITY PROTOCOL SAMSUNG HALF BAUD RATE 9600 ADDRESS SYSTEM INFO 4 _ PTZ _ NOR _ N TYPE PROTOCOL... -
Page 47: Language
LANGUAGE You can set the language of the user interface. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<LANGUAGE>. Select your language using the up/down keys. 00890A-NA_SCC-C6453N-ENG.indb 47 LANGUAGE ... -
Page 48: Shortcut Keys
appendix appendix SHORTCUT KEyS CAmERA SET AUX OUT CONTROL – OUT1 – ON AUX OUT CONTROL – OUT1 – OFF AUX OUT CONTROL – OUT2 – ON ALARm SET AUX OUT CONTROL – OUT2 – OFF AUX OUT CONTROL – OUT3 – ON AUX OUT CONTROL –... -
Page 49: Specifications
SPECIFICATIONS Item Product Type Power Source Power Consumption Tv Standard Image Sensor Effective Pixels Tv line frequency Synchronization Resolution S/N Ratio minimum subject illumination Signal Output Lens 00890A-NA_SCC-C6453N-ENG.indb 49 Description SMART DOME CAMERA AC 24 V (60 Hz) NTSC STANDARD COLOR SYSTEM Super-HAD IT CCD 768(H) ×... - Page 50 appendix Item TILT Remote Control Alarm Operation Temperature Operation Humidity Dimensions (Ø x H) Weight Product Color 0_ appendix 00890A-NA_SCC-C6453N-ENG.indb 50 Description PAN range : 360˚Endless Preset Pan Speed : 600˚/sec, maximum Manual Pan Speed : 0.01˚~ 180˚/sec Tilt range : -6˚~186˚ Preset Pan Speed : 600˚/sec, maximum Manual Pan Speed : 0.01˚~ 180˚/sec RS485(Half&Full Duplex)/RS422,...
-
Page 51: Product Appearance
PRODUCT APPEARANCE English _1 00890A-NA_SCC-C6453N-ENG.indb 51 2009-08-05 오후 3:03:... - Page 52 00890A-NA_SCC-C6453N-ENG.indb 52 2009-08-05 오후 3:03:...