Download Print this page

DSC BV-400UL Installation Instructions

Quad motion detector, bravo 4 series

Advertisement

Quick Links

Series
Quad Motion Detector
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
FEATURES
• QUAD element low noise sensor
• Dual channel processing
• Four interchangeable lenses
• LED on / off jumper
• High level static protection
• Vertical adjustment
• High level transient protection
• SMD construction
• High level white light immunity
• Super quiet operation
• Excellent RF immunity
• Wall / corner mounting
• Temperature compensation
• Small size
• Energy analysis circuit
• Blends with any decor
INTRODUCTION
The Bravo4 is a general purpose quad PIR designed to provide
reliable motion detection for large residential and commercial
applications.
Exceptional design care and factory testing ensure years of trouble
free performance. Immunity against false alarms from RF, static,
electrical transient and white light are all designed in features.
Energy analysis, dual channel signal processing, temperature
compensation and large multi-beam lens design means the human
target will not slip by unnoticed even on a hot summer day.
Four interchangeable lenses, wall or corner mounting and vertical
adjustment provide application versatility, and your client will
appreciate the small size and elegant simplicity of the case design.
SPECIFICATIONS
Operating voltage .................................... 9.5V
Supply voltage ripple ............................. 3.0V pp @ 12V
Standby current ......................................................... 18mA
Current in alarm ......................................................... 16mA
Contact rating (alarm & tamper) ............. 100mA @ 24V
Alarm contact resistor in common .................. 10 ohm ¼W
Operating temperature .................................... 0°C to 49°C
Storage temperature .................................... -40°C to 60°C
Operating humidity ........... 5% to 95% RH non-condensing
Storage humidity ............... up to 99% RH non condensing
RF immunity .............. 20 V/m over range 0.01MHz-1.2GHz
Static immunity ............................................................ 25kV
Transient immunity ................................ 2.4kV @ 1.2 joules
White light immunity ................. 20,000 Lux at the detector
Walk detection speed ............. 0.5' to 10'/s (0.15m - 3m/s)
Coverage angle (wall-to-wall lens) ................ 90° minimum
Vertical adjustment ........................ +5° to -10° (see charts)
Mounting heights ............................. 6' to 10' (nominal 7.5')
NOTE: White light and RF Immunity not verified by UL.
COVERAGE
Wall to Wall lens (BV-L1) 50' L × 60' W (16m × 18m)
Corridor lens (BV-L2)
Curtain lens (BV-L3)
Pet Alley lens (BV-L4)
DIMENSIONS
3.5"H × 2.5"W × 1.87"D (89mmH × 64mmW × 48mmD)
COLOUR
White case with light gray lens
SHIPPING WEIGHT
6 oz. (190 g)
MODELS
BV-400UL
Form A alarm contact
BV-401UL
Form A alarm contact & tamper switch
BV-402UL
Form C alarm contact & tamper switch
WALL-TO-WALL LENS
TOP VIEW
-14.5V
DC
DC
DC
DC
(32°F to 120°F)
(-40°F to 140°F)
SIDE VIEW
2m to 3m (nominal 2.3m)
4' to 5' (pet alley only)
1.2m to 1.5m (pet alley only)
60' L × 5' W (18m × 1.5m)
50' L × 4.4' W (16m × 1.3m)
50' L × 60' W (16m ×18m)
30 ft
L2
9.1 m
15 ft
L3
4.6 m
L4
0 ft
0 m
15 ft
4.6 m
30 ft
9.1 m
50 ft
15.2 m
50 ft
15.2 m
CORRIDOR LENS
TOP VIEW
BEAM PATTERN CHART
ILLUSTRATES THE CENTRE
LINE OF EACH BEAM PAIR
CENTRE
SIDE VIEW
CURTAIN LENS
SIDE VIEW
50 ft
15.2 m
MOUNTING
To open the case, use a small flat blade screwdriver and gently
push in the tab at the bottom of the case and pull the cover
straight out at the bottom. Loosen the PCB screw, and push the
board up as far as it will go. Using a small screwdriver, remove
the appropriate knockouts for the mounting screws. Remove
the left and/or right wiring entrance knockouts located at the top
of the backplate. Mount the backplate using the appropriate
mounting screws (not supplied).
MOUNTING HEIGHT CHART
SETTING FOR FULL RANGE
HEIGHT
ft / m
WALL/WALL CORRIDOR CURTAIN
10' / 3 m
0.00
-0.25
8' / 2.4 m
+0.50
+0.25
7' / 2.1 m
+0.75
+0.25
6' / 1.8 m
+1.00
+0.50
5' / 1.5 m
4' / 1.2 m
6 ft
1.8 m
LINE
60 ft
18.3 m
60 ft
18.3 m
TOP VIEW
50 ft
15.2 m
PET ALLEY
0.00
0.00
0.00
0.00
0.00
0.00

Advertisement

loading

Summary of Contents for DSC BV-400UL

  • Page 1 Energy analysis, dual channel signal processing, temperature 50 ft MODELS 15.2 m compensation and large multi-beam lens design means the human BV-400UL Form A alarm contact MOUNTING target will not slip by unnoticed even on a hot summer day. BV-401UL Form A alarm contact &...
  • Page 2 This action releases the lens. Insert the lens with the ©2002 Digital Security Controls Ltd. GROOVES FACING INWARD. The bottom of the lens is Toronto, Canada • • • • • www.dsc.com • 1-800-387-3630 indicated by two triangular indentations. Ensure that the lens Printed in Canada 29000112 R003 is centred left to right then reinstall the lens holder.

This manual is also suitable for:

Bv-402ulBv-401ul