13-29_EN
1/9/04 8:02 PM
O
P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the MENU button.
Press the
UP/DOWN
buttons to select
"Channel", then press
the ENTER
2
Press the
UP/DOWN
buttons to select
"Auto Program".
3
Press the
ENTER
The TV will begin
memorizing all of the
available channels.
4
After all the available channels are stored, the Auto
Program menu reappears. Press the EXIT button.
To check the channels stored in memory
Press the CH(
Only the channels stored in memory are selected.
To select channels over 100
Page 17
button.
button.
/
)button.
Ex) Press
to select channel 108.
English-
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press
ENTER
interrupt the memorization process
and return to the CHANNEL menu.
17
at any time to